376

Wünsche [ Feature requests ] / openvpn addon

« on: June 02, 2016, 11:58:27 »

Nein, konkret nicht, da ich i.d.R. meine VPN's bereits über die pfSense'sen an der Haustüre abhandle.

Was aber bestimmt interessant wäre, ist die Möglichkeit, das/die Konfigfiles und Key Files ähnlich wie bei den channels.conf.user auswählen zu können, und über das webif zu bearbeiten und zu speichern.

Ob man ein oder mehr Konfigfile/Keyfiles benötigt hängt m.E. nur von der Anzahl und Komplexität der Tunnel ab.
Aber diese Einträge müssten dann ja eh als Startparameter in die rc.config rein.

Schönheitsthema: Ich würde unter Netzwerk den Eintrag VPN auf OPENVPN ändern, damit's eindeutiger ist.

-Wanninger

377

Wünsche [ Feature requests ] / openvpn addon

« on: June 02, 2016, 11:11:55 »

...den hier:

Code: [Select]

# Startarguments for openvpn
OPENVPN_ARGS="--config /etc/openvpn/248.conf"

Der ist bei mir im Moment mit meiner Testkonfig gefüllt.

-Wanninger

378

Wünsche [ Feature requests ] / openvpn addon

« on: June 02, 2016, 11:01:29 »

Danke, das habe ich wohl überlesen. 

Der Eintrag in der rc.config ist aber noch auf "Handbedienung", oder?
(Nur um sicher zu gehen)

-Wanninger

379

Wünsche [ Feature requests ] / openvpn addon

« on: June 02, 2016, 10:51:11 »

Moin!

Claus, was bewirkt der Webeintrag unter VPN "Upload vpn config" im Detail?

-Wanninger

380

Wünsche [ Feature requests ] / openvpn addon

« on: June 02, 2016, 02:48:11 »

Ich habe momentan auch keine Idee wo es jetzt noch hakt.

Ich vermute mal irgendwo an der (Art der) Konfig.

Habe vorhin mal eine Konfig von der ich weiß dass sie funzt mit statischem Key reinkopiert,
und in der rc.config entsprechend eingetragen.
Das tun Modul unter "Module/Add to force load list" eingetragen.
RPI neu gestartet, und der Tunnel stand.

Also grundsätzlich läuft der openvpn.

Ein wenig Handarbeit dürfte aber so oder so noch erforderlich sein,
da der openvpn durchaus komplex werden kann...

-Wanninger

381

WeTek Play / 5.1 auf Wetek

« on: May 30, 2016, 10:55:11 »

In der Zeit vom Dez.'15 waren im 5.0-Testing Zweig mehrmals Kernel zwischen 3.10.90 und 3.10.94 dabei.
Aber die die jetzt gerade läuft ist die Einzige die tatsächlich funktioniert (zumindest unter den Getesteteten)

Ich lasse Dir die Freigaben mal drin, falls Du noch "spielen" musst. 

382

WeTek Play / 5.1 auf Wetek

« on: May 30, 2016, 10:23:55 »

@Claus

Dieses Image läuft aktuell gerade. Soll ich dir den ssh Zugang wieder herstellen?

-Wanninger

383

WeTek Play / 5.1 auf Wetek

« on: May 30, 2016, 00:14:30 »

Mit dem Image "MLD-5_customized_2015.12.07-168+1150.93-v63Bqm_armhf-wtk.tgz" von skippy gibt's OSD und TV Bild.

Ich habe allerdings - sicherheitshalber - das Tunermodul aus dem wetek entfernt.

In diesem Image läuft Kernel 3.10.93

Werde mal noch weiter testen...

-Wanninger

Nachtrag:

Dieses Image funktioniert auch mit eingebautem Tunermodul!

Nachtrag2:

Von den bisher getesteten Images von 12/2015 ist o.g. das einzige, das "halbwegs brauchbar" funktioniert.
Zumindest als Test und Spiel Image.

Es ist aus dem damaligen 5.0 testing Zweig

Vielleicht kann man dieses bzw. Teile davon als Basis für das aktuelle 5.0 stable heranziehen...

384

WeTek Play / 5.1 auf Wetek

« on: May 29, 2016, 18:49:16 »

@claus

FYI
20150830 3.10.76
20150906 3.10.76
20150909 3.10.76

385

WeTek Play / 5.1 auf Wetek

« on: May 29, 2016, 16:31:52 »

Man (ich) ist (bin) ja nun doch neugierig.

Habe mal den aktuellsten OpenElec 6.95.3 gebootet.

Der verwendet Kernel 3.10.99, und da treten genau die gleichen drei Meldungen auf.
Zwei mal smp und einmal wlan.

Meine älteren Wetek Images sind alle 09/2015 und älter, bzw. dann erst wieder seit der 5.1

Wenn jemand noch eine lauffähige ältere satip oder client aus 12/2015 hat, wäre ich ein dankbarer Abnehmer.

-Wanninger

386

WeTek Play / 5.1 auf Wetek

« on: May 29, 2016, 13:17:55 »

Ich nochmal,

bin jetzt nicht sicher, ob ich mich hier verrenne/irre?!?

Zum Gegencheck habe ich meinen 5.1 wetek Server wieder gebootet, und hab dort auch diese drei besagten Kernel
Stack Trace Meldungen gefunden.

Diese Kiste läuft aber als reiner Server absolut stabil.

Vor vielen Jahren habe ich halt mal gelernt, dass solche Fehlermeldungen beim Kernel booten nicht auftreten sollen,
da diese i.d.R. Instabilitäten verursachen.

Vielleicht kann ein DEV Spezialist von Euch hier mal kurz Licht ins (mein) Dunkel bringen...

Danke

-Wanninger

387

WeTek Play / 5.1 auf Wetek

« on: May 29, 2016, 12:50:49 »

Ich hab's nochmal auf ner anderen wetek probiert, und habe absichtlich das amlhddevice Plugin vorher rausgelöscht.

Der aktuelle Effekt bleibt.

Zum Einen scheint eines der wlan Module Probleme zu bereiten, zum Anderen beim Laden der SMP Funktionalität.

Hat das Server-only Image den/die selben Kernel/.config?

Denn bei der Server-only Variante gibt es diese Fehlermeldungen nicht.

Ich versuche mal noch mehr Infos zu sammeln...

-Wanninger

NACHTRAG:

Das aktuelle MLD-5.0 server-only Image hat den gleichen Fehler.
Ich glaube, dass hier noch etwas an der Kernelconfig bzw. an den Modulen hängt...

Code: [Select]

[    8.826270@0] ------------[ cut here ]------------
[    8.826295@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0x2d4/0x2e0()
[    8.826300@0] Modules linked in:
[    8.826311@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.76 #3
[    8.826344@0] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[    8.826364@0] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[    8.826376@0] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[    8.826387@0] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0)
[    8.826399@0] [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[    8.826409@0] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[    8.826420@0] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[    8.826428@0] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[    8.826447@0] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[    8.826460@0] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[    8.826473@0] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[    8.826493@0] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[    8.826504@0] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[    8.826515@0] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[    8.826526@0] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[    8.826543@0] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[    8.826556@0] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[    8.826568@0] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[    8.826578@0] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[    8.826589@0] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[    8.826598@0] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[    8.826608@0] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[    8.826619@0] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[    8.826631@0] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[    8.826649@0] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[    8.826666@0] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[    8.826679@0] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[    8.826685@0] ---[ end trace d39cd155352ac6c3 ]---
[    8.826690@0] ------------[ cut here ]------------
[    8.826699@0] WARNING: at kernel/smp.c:244 smp_call_function_single+0x150/0x198()
[    8.826702@0] Modules linked in:
[    8.826710@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.10.76 #3
[    8.826721@0] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[    8.826733@0] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[    8.826744@0] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[    8.826755@0] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006f908>] (smp_call_function_single+0x150/0x198)
[    8.826764@0] [<c006f908>] (smp_call_function_single+0x150/0x198) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[    8.826773@0] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[    8.826781@0] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[    8.826790@0] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[    8.826801@0] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[    8.826811@0] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[    8.826821@0] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[    8.826832@0] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[    8.826843@0] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[    8.826854@0] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[    8.826864@0] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[    8.826875@0] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[    8.826886@0] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[    8.826897@0] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[    8.826907@0] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[    8.826917@0] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[    8.826926@0] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[    8.826936@0] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[    8.826946@0] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[    8.826956@0] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[    8.826966@0] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[    8.826977@0] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[    8.826988@0] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[    8.826993@0] ---[ end trace d39cd155352ac6c4 ]---
[    8.827460@0] hdmitx: cec: CEC init
[    8.827520@1] hdmitx: cec: CEC task process
[    8.827764@0] input: cec_input as /devices/virtual/input/input6
[    8.827956@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    8.828028@0] ALSA device list:
[    8.828035@0]   #0: AML-DUMMY-CODEC
[    8.828331@0] Freeing unused kernel memory: 212K (c0796000 - c07cb000)
[    9.242202@0] raid6: int32x1    196 MB/s
[    9.412199@0] raid6: int32x2    267 MB/s
[    9.582230@0] raid6: int32x4    267 MB/s
[    9.752191@0] raid6: int32x8    293 MB/s
[    9.752197@0] raid6: using algorithm int32x8 (293 MB/s)
[    9.752202@0] raid6: using intx1 recovery algorithm
[    9.753425@1] xor: measuring software checksum speed
[    9.852162@1]    arm4regs  :  2046.000 MB/sec
[    9.952158@1]    8regs     :  1462.000 MB/sec
[   10.052160@1]    32regs    :  1491.600 MB/sec
[   10.052166@1] xor: using function: arm4regs (2046.000 MB/sec)
[   10.113274@1] bio: create slab <bio-1> at 1
[   10.114446@1] Btrfs loaded
[   22.018167@0] EXT3-fs (system): error: couldn't mount because of unsupported optional features (40)
[   22.018753@0] EXT2-fs (system): error: couldn't mount because of unsupported optional features (40)
[   22.019090@0] force enable DISCARD here for ext4 fs
[   22.032518@1] checked enable EXT4 DISCARD here
[   22.032537@1] EXT4-fs (system): mounting with "discard" option, but the device does not support discard
[   22.032545@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
[   22.045520@0] EXT3-fs (cache): error: couldn't mount because of unsupported optional features (40)
[   22.046089@0] EXT2-fs (cache): error: couldn't mount because of unsupported optional features (40)
[   22.046383@0] force enable DISCARD here for ext4 fs
[   22.061346@0] checked enable EXT4 DISCARD here
[   22.061365@0] EXT4-fs (cache): mounting with "discard" option, but the device does not support discard
[   22.061372@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: (null)
[   22.127686@0] UDF-fs: warning (device mmcblk0): udf_fill_super: No partition found (1)
[   22.134446@0] EXT3-fs (data): error: couldn't mount because of unsupported optional features (40)
[   22.135000@0] EXT2-fs (data): error: couldn't mount because of unsupported optional features (40)
[   22.135288@0] force enable DISCARD here for ext4 fs
[   22.151102@0] checked enable EXT4 DISCARD here
[   22.151119@0] EXT4-fs (data): mounting with "discard" option, but the device does not support discard
[   22.151127@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
[   23.832455@1] cec: register fiq
[   23.832480@1] hdmitx: cec: CEC node init
[   23.832490@1] hdmitx: cec: cec_config: 0x0; ao_cec:0x0
[   23.832496@1] hdmitx: cec: CEC: start poll dev
[   23.902284@1] cec TX status: rx: 0x0; tx: 0x2
[   23.902316@1] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 1
[   23.902321@1] hdmitx: cec: player_dev[0]:0x4
[   23.902325@1] hdmitx: cec: CEC: start poll dev
[   23.972668@1] cec TX status: rx: 0x0; tx: 0x0
[   24.032294@1] cec TX status: rx: 0x0; tx: 0x0
[   24.032373@1] hdmitx: cec: hw reset :logical addr:0x18
[   24.092257@1] cec TX status: rx: 0x0; tx: 0x1
[   24.092295@1] hdmitx: cec: hw reset :logical addr:0x18
[   24.092299@1] cec: try 3 times
[   24.092305@1] hdmitx: cec: CEC: poll online logic device: 0x8 BOOL: 0
[   24.092311@1] hdmitx: cec: player_dev[1]:0x8
[   24.092316@1] hdmitx: cec: physical address:0x2000
[   24.092324@1] hdmitx: cec: Set logical address: 8
[   24.092328@1] hdmitx: cec: aml_read_reg32(P_AO_DEBUG_REG0):0xf
[   24.372306@1] cec TX status: rx: 0x0; tx: 0x2
[   24.518218@0] hdmitx: cec: opcode:0x80, hdmitx_device->cec_func_config:0xf
[   24.589782@0] hdmitx: cec: opcode:0x46, hdmitx_device->cec_func_config:0xf
[   24.659042@0] hdmitx: cec: opcode:0x8c, hdmitx_device->cec_func_config:0xf
[   24.852385@0] cec TX status: rx: 0x0; tx: 0x2
[   25.112287@0] cec TX status: rx: 0x0; tx: 0x2
[   25.322335@0] cec TX status: rx: 0x0; tx: 0x2
[   25.448480@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
[   25.832333@0] cec TX status: rx: 0x0; tx: 0x2
[   26.082264@0] cec TX status: rx: 0x0; tx: 0x2
[   26.183375@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
[   26.192853@0] hdmitx: cec: cec node init: cec features ok !
[   26.602285@0] cec TX status: rx: 0x0; tx: 0x2
[   26.773540@1] cec TX status: rx: 0x0; tx: 0x2
[   26.776448@1] hdmitx: cec: cec_set_menu_language:g.e.r
[   28.227287@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
[   35.787415@1] wetekdvb: module license 'Proprietary' taints kernel.
[   35.787438@1] Disabling lock debugging due to kernel taint
[   35.788695@1] wetek-dvb dvb.8: Loading ...
[   35.811857@1] DVB: registering new adapter (Wetek_DVB_0)
[   35.811897@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[   35.815262@1] wetek-dvb dvb.8: Register ca0loop device
[   35.815304@1] DVB: registering new adapter (Wetek_DVB_1)
[   35.815315@1] wetek-dvb dvb.8: DVB: registering adapter 1 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[   35.816570@1] wetek-dvb dvb.8: Register ca1loop device
[   35.816614@1] wetek-dvb dvb.8: fifo_0/2097152/4096
[   35.818863@1] wetek-dvb dvb.8: FLUSH FIFO_0
[   35.818872@1] wetek-dvb dvb.8: FLUSH ok
[   35.818890@1] wetek-dvb dvb.8: fifo_1/2097152/4096
[   35.821156@1] wetek-dvb dvb.8: FLUSH FIFO_1
[   35.821163@1] wetek-dvb dvb.8: FLUSH ok
[   35.826571@1] vmap allocation for size 25169920 failed: use vmalloc=<size> to increase size.
[   35.826601@1] wetekfb wetekfb.0: failed to ioremap wetek framebuffer
[   35.826716@1] wetekfb: probe of wetekfb.0 failed with error -14
[   35.827502@1] wetek-dvb dvb.8: Loading finished
[   35.876279@1] ------------[ cut here ]------------
[   35.876358@1] WARNING: at net/wireless/reg.c:434 regulatory_init+0x94/0x128 [cfg80211]()
[   35.876364@1] db.txt is empty, you should update it...
[   35.876368@1] Modules linked in: cfg80211(+) wetekdvb(PO) btrfs xor raid6_pq
[   35.876389@1] CPU: 1 PID: 7494 Comm: modprobe Tainted: P        W  O 3.10.76 #3
[   35.876424@1] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[   35.876442@1] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[   35.876454@1] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a224>] (warn_slowpath_fmt+0x30/0x40)
[   35.876488@1] [<c002a224>] (warn_slowpath_fmt+0x30/0x40) from [<bf0d2174>] (regulatory_init+0x94/0x128 [cfg80211])
[   35.876517@1] [<bf0d2174>] (regulatory_init+0x94/0x128 [cfg80211]) from [<00000000>] (  (null))
[   35.876523@1] ---[ end trace d39cd155352ac6c5 ]---
[   35.876550@1] cfg80211: Calling CRDA to update world regulatory domain
[   35.901895@0] dhd_module_init: Enter
[   35.901914@0] wifi_setup_dt
[   35.901938@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
[   35.901947@0] clock_32k_pin(53) : (null)
[   35.901987@0] clock_32k_pin(53) : sdio_wifi
[   35.902453@0] interrupt_pin(52) : (null)
[   35.902525@0] wifi_dt : gpio op failed(-1) at line 250
[   35.902542@0] interrupt_pin(52) : sdio_wifi
[   35.902546@0] power_on_pin(112) : (null)
[   35.902560@0] power_on_pin(112) : sdio_wifi
[   35.902564@0] bt_setup
[   36.052377@1] WIFI  Disable! 112
[   36.341029@1] WIFI  Enable! 112
[   37.622283@0] [aml_sdio_timeout] time_start_cnt:992
[   37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[   37.622283@0] [aml_sdio_timeout] time_start_cnt:999
[   37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[   37.622283@0] [aml_sdio_timeout] time_start_cnt:995
[   37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[   39.622187@0] <4>[   39.630431@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   39.631761@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   39.633383@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   39.635778@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   39.649513@0] sdio: new high speed SDIO card at address 0001, clock 50000000, 4-bit-bus-width
[   39.650123@1] [sdio_reinit] finish
[   39.650422@1] =========== WLAN placed in POWER ON ========
[   39.650750@0] bcmsdh_register: Linux Kernel SDIO/MMC Driver
[   39.650877@0] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
[   39.651577@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[   39.653895@0] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[   39.654578@0] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[   39.655140@0] dhdsdio_probe: Disable prop_txstatus
[   39.655638@0] wl_create_event_handler(): thread:wl_event_handler:212e started
[   39.655641@1] tsk Enter, tsk = 0xefd3c4cc
[   39.655663@0] init wlan_priv_wake
[   39.655710@0] dhd_attach(): thread:dhd_watchdog_thread:212f started
[   39.655748@0] dhd_attach(): thread:dhd_dpc:2130 started
[   39.655787@0] dhd_attach(): thread:dhd_sysioc:2131 started
[   39.656644@0] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[   39.656747@0] =========== WLAN placed in RESET ========
[   39.656763@0] init wifi power_wake lock
[   39.656916@0]
[   39.656916@0] Dongle Host Driver, version 1.88.45.4 (r420671)
[   39.656916@0] Compiled in drivers/net/wireless/bcmdhd on Dec  1 2015 at 16:39:39
[   39.656927@0] dhd_module_init: Exit error=0
[   39.664139@0] rtk_btusb: Realtek Bluetooth USB driver ver 2.11
[   39.664332@0] usbcore: registered new interface driver rtk_btusb
[   39.834018@1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   41.885309@0] systemd-udevd[9750]: starting version 215
[   41.898494@0] udevd[9750]: invalid key/value pair in file /etc/udev/rules.d/98-wetek-oe-remote.rules on line 1,starting at character 1 ('#')
[   41.898525@0] udevd[9750]: hint: comments can only start at beginning of line
[   42.046003@0] udevd[10036]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
[   42.059949@1] udevd[10038]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory


388

WeTek Play / 5.1 auf Wetek

« on: May 29, 2016, 12:02:04 »

Hei Claus,

es zwickt noch.

Das neue Image im live Betrieb:

Display schwarz, keine Bedienung über Tastatur, umschalten auf Console geht nicht, sshd wird nicht mehr gestartet.

Installiert auf SD Karte:

Display schwarz, kein OSD, ssh geht, im dmesg sind immer noch die Kernel Stack Meldungen siehe unten

---

Die Wetek ist wieder erreichbar - selbe Zugangsdaten.

-Wanninger

---

Code: [Select]

[    7.015979@1] ------------[ cut here ]------------
[    7.016004@1] WARNING: at kernel/smp.c:382 smp_call_function_many+0x2d4/0x2e0()
[    7.016009@1] Modules linked in:
[    7.016019@1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.76 #3
[    7.016053@1] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[    7.016073@1] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[    7.016085@1] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[    7.016097@1] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0)
[    7.016108@1] [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[    7.016119@1] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[    7.016129@1] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[    7.016137@1] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[    7.016155@1] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[    7.016168@1] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[    7.016181@1] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[    7.016200@1] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[    7.016212@1] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[    7.016223@1] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[    7.016234@1] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[    7.016251@1] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[    7.016263@1] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[    7.016275@1] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[    7.016285@1] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[    7.016295@1] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[    7.016305@1] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[    7.016315@1] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[    7.016326@1] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[    7.016337@1] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[    7.016354@1] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[    7.016371@1] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[    7.016385@1] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[    7.016391@1] ---[ end trace 7a66a00751ca1022 ]---
[    7.016396@1] ------------[ cut here ]------------
[    7.016404@1] WARNING: at kernel/smp.c:244 smp_call_function_single+0x150/0x198()
[    7.016408@1] Modules linked in:
[    7.016415@1] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W    3.10.76 #3
[    7.016428@1] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[    7.016440@1] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[    7.016451@1] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[    7.016461@1] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006f908>] (smp_call_function_single+0x150/0x198)
[    7.016471@1] [<c006f908>] (smp_call_function_single+0x150/0x198) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[    7.016480@1] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[    7.016489@1] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[    7.016497@1] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[    7.016507@1] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[    7.016518@1] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[    7.016528@1] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[    7.016539@1] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[    7.016550@1] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[    7.016561@1] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[    7.016572@1] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[    7.016583@1] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[    7.016593@1] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[    7.016604@1] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[    7.016614@1] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[    7.016623@1] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[    7.016633@1] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[    7.016642@1] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[    7.016653@1] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[    7.016662@1] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[    7.016673@1] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[    7.016684@1] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[    7.016695@1] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[    7.016700@1] ---[ end trace 7a66a00751ca1023 ]---
[    7.017189@1] hdmitx: cec: CEC init
[    7.017244@0] hdmitx: cec: CEC task process
[    7.017469@1] input: cec_input as /devices/virtual/input/input8
[    7.017666@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    7.017729@1] ALSA device list:
[    7.017735@1]   #0: AML-DUMMY-CODEC
[    7.018021@1] Freeing unused kernel memory: 212K (c0796000 - c07cb000)
[    7.422336@1] raid6: int32x1    201 MB/s
[    7.592296@1] raid6: int32x2    275 MB/s
[    7.762224@1] raid6: int32x4    275 MB/s
[    7.932201@1] raid6: int32x8    303 MB/s
[    7.932206@1] raid6: using algorithm int32x8 (303 MB/s)
[    7.932210@1] raid6: using intx1 recovery algorithm
[    7.933345@1] xor: measuring software checksum speed
[    8.032129@1]    arm4regs  :  2032.800 MB/sec
[    8.132123@1]    8regs     :  1461.600 MB/sec
[    8.232122@1]    32regs    :  1491.200 MB/sec
[    8.232128@1] xor: using function: arm4regs (2032.800 MB/sec)
[    8.291629@1] bio: create slab <bio-1> at 1
[    8.292940@1] Btrfs loaded
[    9.585802@1] UDF-fs: warning (device mmcblk0p2): udf_fill_super: No partition found (1)
[    9.588391@1] device fsid 304033fc-1929-442e-a51e-4d2958f60e73 devid 1 transid 16 /dev/mmcblk0p2
[    9.591004@1] btrfs: disk space caching is enabled
[    9.605453@1] Btrfs detected SSD devices, enabling SSD mode
[   12.876059@1] btrfs: use ssd allocation scheme
[   12.876080@1] btrfs: disk space caching is enabled
[   14.206227@1] systemd-udevd[1817]: starting version 215
[   14.430911@1] ------------[ cut here ]------------
[   14.430977@1] WARNING: at net/wireless/reg.c:434 regulatory_init+0x94/0x128 [cfg80211]()
[   14.430983@1] db.txt is empty, you should update it...
[   14.430987@1] Modules linked in: cfg80211(+) btrfs xor raid6_pq
[   14.431008@1] CPU: 1 PID: 1809 Comm: modprobe Tainted: G        W    3.10.76 #3
[   14.431042@1] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[   14.431061@1] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[   14.431072@1] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a224>] (warn_slowpath_fmt+0x30/0x40)
[   14.431110@1] [<c002a224>] (warn_slowpath_fmt+0x30/0x40) from [<bf11f174>] (regulatory_init+0x94/0x128 [cfg80211])
[   14.431160@1] [<bf11f174>] (regulatory_init+0x94/0x128 [cfg80211]) from [<bf11f064>] (cfg80211_init+0x64/0xe0 [cfg80211])
[   14.431189@1] [<bf11f064>] (cfg80211_init+0x64/0xe0 [cfg80211]) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[   14.431206@1] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c00733d0>] (load_module+0x18f8/0x1e6c)
[   14.431217@1] [<c00733d0>] (load_module+0x18f8/0x1e6c) from [<c0073a20>] (SyS_init_module+0xdc/0xf0)
[   14.431228@1] [<c0073a20>] (SyS_init_module+0xdc/0xf0) from [<c000dec0>] (ret_fast_syscall+0x0/0x30)
[   14.431234@1] ---[ end trace 7a66a00751ca1024 ]---
[   14.431280@1] cfg80211: Calling CRDA to update world regulatory domain
[   14.516777@0] dhd_module_init: Enter
[   14.516795@0] wifi_setup_dt
[   14.516802@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
[   14.516808@0] clock_32k_pin(53) : (null)
[   14.516831@0] clock_32k_pin(53) : sdio_wifi


389

WeTek Play / 5.1 auf Wetek

« on: May 28, 2016, 22:17:01 »

Es kommt weder beim satip noch beim client ein OSD.

Solange diese Kernel Stack Trace Meldungen während und nach dem booten kommen,
brauchen wir über andere Dinge noch garnicht reden. In der Regel, selbst wenn die
Kiste noch bedienbar bleibt, hängt sie irgenwann.

Diese Meldungen müssen zuerst weg, dann kann man weiter ins Detail gehen.

-Wanninger

390

WeTek Play / 5.1 auf Wetek

« on: May 28, 2016, 20:38:19 »

Ich hab jetzt mal die satip-wtk gewählt.

Zur Sicherheit habe ich auch noch das DVB Tunermodul entfernt.

Nach dem Booten geht nicht wirklich mehr als vorher.

Hier der upload code für den Debug-Log: sO2wQp

-Wanninger