Archiv > General
Wintv Pvr 350
Christian:
--- Quote --- Nein, Du liegst völlig richtig, es sind Monitor und TV angeschlossen.
TV und Ton (Audio-out) über die Kabelpeitsche der PVR350.
Ich kann am TV jeweils über Composite, S-VHS und Scart reingehen, der Ton hat noch 2 Cinch-Eingänge.
Egal welchen TV-Eingang ich ausprobiert hab, es kam leider kein Bild, witzigerweise aber der Ton...
--- End quote ---
Liegt vermutlich wirklich an der GRUB Einstellung :
Bitte probiere mal in der Datei /Boot/grub/menu.lst die Kernel Zeile vom quite Mode zu ändern:
Ergänzen mit: "video=vc:64-64 video=map:0"
clausmuus:
Na ja, da die MLD-3 kein grub verwenden, doch besser die /boot/isolinux/extlinux.cfg bzw beim booten von USB-Stick die isolinux.cfg :)
Das lässt sich aber auch direkt im Bootmanager nach drücken der TAB-Taste eintippen.
Claus
Christian:
--- Quote --- Na ja, da die MLD-3 kein grub verwenden, doch besser die /boot/isolinux/extlinux.cfg bzw beim booten von USB-Stick die isolinux.cfg :)
Das lässt sich aber auch direkt im Bootmanager nach drücken der TAB-Taste eintippen.
Claus
--- End quote ---
Upps da hab ich wohl was verwechselt ;)
strinxx:
Also... ich hab's jetzt mit beiden Varianten / ISOs durchgespielt.
Alles wie wir das durchgekaut haben. Mit mäßigem Erfolg, leider.
Bei dvbsdevice-iso kam gar nix, auch kein Ton, dafür massig Fehler:
--- Code: ---/var/log/messages
Oct 13 20:40:06 (none) syslog.info syslogd started: BusyBox v1.19.4
Oct 13 20:40:06 (none) user.warn kernel: aufs test_add:261:mount[2232]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2245]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2258]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2271]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2284]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2297]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2310]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2323]: uid/gid/perm /var/spool/apm.mnt/backup 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2339]: uid/gid/perm /var/spool/apm.mnt/pvr350 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2357]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Oct 13 20:40:10 (none) user.info kernel: Linux media interface: v0.10
Oct 13 20:40:10 (none) user.info kernel: Linux video capture interface: v2.00
Oct 13 20:40:10 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Oct 13 20:40:10 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Oct 13 20:40:10 (none) user.err kernel: enough quality for its usage in production.
Oct 13 20:40:10 (none) user.err kernel: Use it with care.
Oct 13 20:40:10 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Oct 13 20:40:10 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Oct 13 20:40:10 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Oct 13 20:40:10 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Oct 13 20:40:11 (none) user.info kernel: ivtv: Start initialization, version 1.4.3
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Initializing card 0
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 13 20:40:11 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 13 20:40:11 (none) user.debug kernel: PCI: setting IRQ 10 as level-triggered
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: Hauppauge model 48134, rev J347, serial# 7110333
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 13 20:40:11 (none) user.info kernel: tuner 0-0061: Tuner -1 found with type(s) Radio TV.
Oct 13 20:40:11 (none) user.info kernel: tuner-simple 0-0061: creating new instance
Oct 13 20:40:11 (none) user.info kernel: tuner-simple 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device radio0 for encoder radio
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi16 for decoder VOUT
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Initialized card: Hauppauge WinTV PVR-350
Oct 13 20:40:11 (none) user.info kernel: ivtv: End initialization
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Encoder revision: 0x02060039
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Decoder revision: 0x02020023
Oct 13 20:40:16 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 13 20:40:16 (none) user.info kernel: ivtvfb0: Framebuffer at 0xe5510000, mapped to 0xdfc90000, size 1665k
Oct 13 20:40:16 (none) user.info kernel: ivtvfb0: Framebuffer registered on ivtv0
Oct 13 22:40:17 (none) user.err vdr: [2693] pvr350: Cannot find framebuffer
Oct 13 20:40:24 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 13 20:40:24 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
Oct 13 20:40:24 (none) user.debug kernel: PCI: setting IRQ 15 as level-triggered
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: (unregistered net_device): not PCI Express
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: eth0: RTL8169sc/8110sc at 0xded88000, 00:90:dc:a2:6b:97, XID 18000000 IRQ 15
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
Oct 13 20:40:26 (none) user.info kernel: r8169 0000:00:09.0: eth0: link down
Oct 13 20:40:26 (none) user.info kernel: r8169 0000:00:09.0: eth0: link down
Oct 13 20:40:26 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 13 20:40:27 (none) user.info kernel: r8169 0000:00:09.0: eth0: link up
Oct 13 20:40:27 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 13 20:40:28 (none) user.info kernel: ivtvfb: Unloading framebuffer module
Oct 13 20:40:28 (none) user.info kernel: ivtvfb0: Unregister framebuffer 0
Oct 13 20:40:28 (none) user.info kernel: tuner-simple 0-0061: destroying instance
Oct 13 20:40:28 (none) user.info kernel: ivtv: Removed Hauppauge WinTV PVR-350
Oct 13 20:40:29 (none) user.info kernel: ivtv: Start initialization, version 1.4.3
Oct 13 20:40:29 (none) user.alert kernel: BUG: unable to handle kernel paging request at decdbc7c
Oct 13 20:40:29 (none) user.alert kernel: IP: [] driver_find+0x1b/0x1b
Oct 13 20:40:29 (none) user.warn kernel: *pde = 1c679067 *pte = 00000000
Oct 13 20:40:29 (none) user.warn kernel: Oops: 0000 [#1] SMP
Oct 13 20:40:29 (none) user.warn kernel: Modules linked in: ivtv(O+) tveeprom(O) cx2341x(O) i2c_algo_bit r8169 tuner_simple(O) tuner_types(O) tuner(O) v4l2_common(O) videodev(O) media(O) [last unloaded: i2c_algo_bit]
Oct 13 20:40:29 (none) user.warn kernel: Pid: 3519, comm: modprobe Tainted: G O 3.3.1.132 #1 FUJITSU SIEMENS FUTRO S400 /TR53A0
Oct 13 20:40:29 (none) user.warn kernel: EIP: 0060:[] EFLAGS: 00010286 CPU: 0
Oct 13 20:40:29 (none) user.warn kernel: EIP is at put_driver+0x0/0x8
Oct 13 20:40:29 (none) user.warn kernel: EAX: decdbc48 EBX: df75cc48 ECX: 000000c6 EDX: decdbc48
Oct 13 20:40:29 (none) user.warn kernel: ESI: df75cdcc EDI: df75cc48 EBP: df760000 ESP: db50bef4
Oct 13 20:40:29 (none) user.warn kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Oct 13 20:40:29 (none) user.emerg kernel: Process modprobe (pid: 3519, ti=db50a000 task=dba9e440 task.ti=db50a000)
Oct 13 20:40:29 (none) user.emerg kernel: Stack:
Oct 13 20:40:29 (none) user.warn kernel: c122e322 df760000 df75cc18 df75cdcc df75cc48 df760000 c11d3305 df75cdcc
Oct 13 20:40:29 (none) user.warn kernel: df75cdcc dc1a9860 df760000 df760061 c100114e 00000000 df75cdcc df75cdcc
Oct 13 20:40:29 (none) user.warn kernel: dc1a9860 00000001 c104b7ab df7380b8 00000026 df75ce14 00000014 df738c48
Oct 13 20:40:29 (none) user.emerg kernel: Call Trace:
Oct 13 20:40:29 (none) user.warn kernel: [] ? driver_register+0x57/0xc6
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? __pci_register_driver+0x32/0x89
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? module_start+0x61/0x84 [ivtv]
Oct 13 20:40:29 (none) user.warn kernel: [] ? do_one_initcall+0x66/0x104
Oct 13 20:40:29 (none) user.warn kernel: [] ? sys_init_module+0x133b/0x1554
Oct 13 20:40:29 (none) user.warn kernel: [] ? sysenter_do_call+0x12/0x26
Oct 13 20:40:29 (none) user.emerg kernel: Code: 6f 51 c1 75 d5 5b b8 90 6f 51 c1 e9 96 dc 16 00 89 c1 8b 42 3c 89 ca 8b 40 54 e8 49 0a f9 ff 31 d2 85 c0 74 03 8b 50 4c 89 d0 c3 40 34 e9 74 03 f9 ff 55 57 56 53 89 c3 55 8b 40 04 83 78 3c
Oct 13 20:40:29 (none) user.emerg kernel: EIP: [] put_driver+0x0/0x8 SS:ESP 0068:db50bef4
Oct 13 20:40:29 (none) user.warn kernel: CR2: 00000000decdbc7c
Oct 13 20:40:29 (none) user.warn kernel: ---[ end trace 652f64ba1e6d2e2b ]---
Oct 13 20:40:34 (none) user.info kernel: bootsplash: status on console 0 changed to on
Oct 13 22:40:35 (none) auth.info login[3954]: root login on 'tty1'
Oct 13 22:40:35 (none) auth.info login[3956]: root login on 'tty2'
Oct 13 22:40:35 (none) auth.info login[3959]: root login on 'tty3'
Oct 13 22:40:35 (none) auth.info login[3964]: root login on 'tty4'
Oct 13 20:40:38 (none) user.debug kernel: eth0: no IPv6 routers present
Oct 13 20:40:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:40:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi_result (err -16)
Oct 13 20:41:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_debug (err -16)
Oct 13 20:41:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi_result (err -16)
Oct 13 20:41:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_alloc (err -16)
Oct 13 20:42:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_debug (err -16)
Oct 13 20:42:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_unmap (err -16)
Oct 13 20:42:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_alloc (err -16)
Oct 13 20:42:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_firmware_check (err -16)
Oct 13 20:43:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_unmap (err -16)
Oct 13 20:43:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi (err -16)
Oct 13 20:43:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_firmware_check (err -16)
Oct 13 20:43:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_prepare (err -16)
Oct 13 20:44:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi (err -16)
Oct 13 20:44:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_init_on_first_open (err -16)
Oct 13 20:44:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_prepare (err -16)
Oct 13 20:44:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_setup (err -16)
Oct 13 22:45:00 (none) user.err vdr: [6927] pvr350: Can't open video decoder device
Oct 13 22:45:00 (none) user.err vdr: [6927] ERROR: no OSD provider available - using dummy OSD!
--- End code ---
beim Starten:
--- Code: ---/var/log/sysinit
Sat Oct 13 20:40:04 UTC 2012
Copy initramfs to tmpfs: done
Preparing root as aufs: done
Import system device: /dev/hda1
Turn on DMA:
done
Checking:
done
Mounting:
done
Mounting read-write system directory:
done
Setting up logging: level 1
done
Setting up netware:
done
Importing addon: locales
done
Importing addon: network
done
Importing addon: webserver
done
Importing addon: remote-autodetect
done
Importing addon: vdr
done
Importing addon: addons
done
Importing addon: setup
done
Importing addon: backup
done
Importing addon: pvr350
done
Importing addon: dvb
done
Import all further filesystems:
Turn on DMA:
Checking:
done
Mounting:
done
locales:
Setting timezone:
done
Load keymap: de-latin1
done
vdr:
Loading dvb driver
done
pvr350: 22:40:17 pvr350: Start autodetection of decoder device
pvr350: 22:40:17 pvr350: Found decoder device on /dev/video16
pvr350: 22:40:17 pvr350: Cannot find framebuffer
VDR exits at Sa Okt 13 22:40:17 CEST 2012
Starting VDR
done
network:
webserver:
addons:
setup:
Unloading dvb driver
done
Loading dvb driver
Loading network driverdone
Starting DHCP-clientdone
Starting webserver:
done
Setting up setup menu:
done
--- End code ---
Alles der Reihe nach gemacht wie angegeben...
Schade.
Christian:
--- Quote --- Also... ich hab's jetzt mit beiden Varianten / ISOs durchgespielt.
Alles wie wir das durchgekaut haben. Mit mäßigem Erfolg, leider.
Bei dvbsdevice-iso kam gar nix, auch kein Ton, dafür massig Fehler:
--- Code: ---/var/log/messages
Oct 13 20:40:06 (none) syslog.info syslogd started: BusyBox v1.19.4
Oct 13 20:40:06 (none) user.warn kernel: aufs test_add:261:mount[2232]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2245]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2258]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2271]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2284]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2297]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2310]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2323]: uid/gid/perm /var/spool/apm.mnt/backup 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2339]: uid/gid/perm /var/spool/apm.mnt/pvr350 0/0/0777, 0/0/0775
Oct 13 20:40:07 (none) user.warn kernel: aufs test_add:261:mount[2357]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Oct 13 20:40:10 (none) user.info kernel: Linux media interface: v0.10
Oct 13 20:40:10 (none) user.info kernel: Linux video capture interface: v2.00
Oct 13 20:40:10 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Oct 13 20:40:10 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Oct 13 20:40:10 (none) user.err kernel: enough quality for its usage in production.
Oct 13 20:40:10 (none) user.err kernel: Use it with care.
Oct 13 20:40:10 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Oct 13 20:40:10 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Oct 13 20:40:10 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Oct 13 20:40:10 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Oct 13 20:40:11 (none) user.info kernel: ivtv: Start initialization, version 1.4.3
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Initializing card 0
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 13 20:40:11 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 13 20:40:11 (none) user.debug kernel: PCI: setting IRQ 10 as level-triggered
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: Hauppauge model 48134, rev J347, serial# 7110333
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 13 20:40:11 (none) user.info kernel: tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 13 20:40:11 (none) user.info kernel: tuner 0-0061: Tuner -1 found with type(s) Radio TV.
Oct 13 20:40:11 (none) user.info kernel: tuner-simple 0-0061: creating new instance
Oct 13 20:40:11 (none) user.info kernel: tuner-simple 0-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device radio0 for encoder radio
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device vbi16 for decoder VOUT
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Initialized card: Hauppauge WinTV PVR-350
Oct 13 20:40:11 (none) user.info kernel: ivtv: End initialization
Oct 13 20:40:11 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Encoder revision: 0x02060039
Oct 13 20:40:14 (none) user.info kernel: ivtv0: Decoder revision: 0x02020023
Oct 13 20:40:16 (none) user.info kernel: ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 13 20:40:16 (none) user.info kernel: ivtvfb0: Framebuffer at 0xe5510000, mapped to 0xdfc90000, size 1665k
Oct 13 20:40:16 (none) user.info kernel: ivtvfb0: Framebuffer registered on ivtv0
Oct 13 22:40:17 (none) user.err vdr: [2693] pvr350: Cannot find framebuffer
Oct 13 20:40:24 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 13 20:40:24 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
Oct 13 20:40:24 (none) user.debug kernel: PCI: setting IRQ 15 as level-triggered
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: (unregistered net_device): not PCI Express
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: eth0: RTL8169sc/8110sc at 0xded88000, 00:90:dc:a2:6b:97, XID 18000000 IRQ 15
Oct 13 20:40:24 (none) user.info kernel: r8169 0000:00:09.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
Oct 13 20:40:26 (none) user.info kernel: r8169 0000:00:09.0: eth0: link down
Oct 13 20:40:26 (none) user.info kernel: r8169 0000:00:09.0: eth0: link down
Oct 13 20:40:26 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 13 20:40:27 (none) user.info kernel: r8169 0000:00:09.0: eth0: link up
Oct 13 20:40:27 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 13 20:40:28 (none) user.info kernel: ivtvfb: Unloading framebuffer module
Oct 13 20:40:28 (none) user.info kernel: ivtvfb0: Unregister framebuffer 0
Oct 13 20:40:28 (none) user.info kernel: tuner-simple 0-0061: destroying instance
Oct 13 20:40:28 (none) user.info kernel: ivtv: Removed Hauppauge WinTV PVR-350
Oct 13 20:40:29 (none) user.info kernel: ivtv: Start initialization, version 1.4.3
Oct 13 20:40:29 (none) user.alert kernel: BUG: unable to handle kernel paging request at decdbc7c
Oct 13 20:40:29 (none) user.alert kernel: IP: [] driver_find+0x1b/0x1b
Oct 13 20:40:29 (none) user.warn kernel: *pde = 1c679067 *pte = 00000000
Oct 13 20:40:29 (none) user.warn kernel: Oops: 0000 [#1] SMP
Oct 13 20:40:29 (none) user.warn kernel: Modules linked in: ivtv(O+) tveeprom(O) cx2341x(O) i2c_algo_bit r8169 tuner_simple(O) tuner_types(O) tuner(O) v4l2_common(O) videodev(O) media(O) [last unloaded: i2c_algo_bit]
Oct 13 20:40:29 (none) user.warn kernel: Pid: 3519, comm: modprobe Tainted: G O 3.3.1.132 #1 FUJITSU SIEMENS FUTRO S400 /TR53A0
Oct 13 20:40:29 (none) user.warn kernel: EIP: 0060:[] EFLAGS: 00010286 CPU: 0
Oct 13 20:40:29 (none) user.warn kernel: EIP is at put_driver+0x0/0x8
Oct 13 20:40:29 (none) user.warn kernel: EAX: decdbc48 EBX: df75cc48 ECX: 000000c6 EDX: decdbc48
Oct 13 20:40:29 (none) user.warn kernel: ESI: df75cdcc EDI: df75cc48 EBP: df760000 ESP: db50bef4
Oct 13 20:40:29 (none) user.warn kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Oct 13 20:40:29 (none) user.emerg kernel: Process modprobe (pid: 3519, ti=db50a000 task=dba9e440 task.ti=db50a000)
Oct 13 20:40:29 (none) user.emerg kernel: Stack:
Oct 13 20:40:29 (none) user.warn kernel: c122e322 df760000 df75cc18 df75cdcc df75cc48 df760000 c11d3305 df75cdcc
Oct 13 20:40:29 (none) user.warn kernel: df75cdcc dc1a9860 df760000 df760061 c100114e 00000000 df75cdcc df75cdcc
Oct 13 20:40:29 (none) user.warn kernel: dc1a9860 00000001 c104b7ab df7380b8 00000026 df75ce14 00000014 df738c48
Oct 13 20:40:29 (none) user.emerg kernel: Call Trace:
Oct 13 20:40:29 (none) user.warn kernel: [] ? driver_register+0x57/0xc6
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? __pci_register_driver+0x32/0x89
Oct 13 20:40:29 (none) user.warn kernel: [] ? 0xdf75ffff
Oct 13 20:40:29 (none) user.warn kernel: [] ? module_start+0x61/0x84 [ivtv]
Oct 13 20:40:29 (none) user.warn kernel: [] ? do_one_initcall+0x66/0x104
Oct 13 20:40:29 (none) user.warn kernel: [] ? sys_init_module+0x133b/0x1554
Oct 13 20:40:29 (none) user.warn kernel: [] ? sysenter_do_call+0x12/0x26
Oct 13 20:40:29 (none) user.emerg kernel: Code: 6f 51 c1 75 d5 5b b8 90 6f 51 c1 e9 96 dc 16 00 89 c1 8b 42 3c 89 ca 8b 40 54 e8 49 0a f9 ff 31 d2 85 c0 74 03 8b 50 4c 89 d0 c3 40 34 e9 74 03 f9 ff 55 57 56 53 89 c3 55 8b 40 04 83 78 3c
Oct 13 20:40:29 (none) user.emerg kernel: EIP: [] put_driver+0x0/0x8 SS:ESP 0068:db50bef4
Oct 13 20:40:29 (none) user.warn kernel: CR2: 00000000decdbc7c
Oct 13 20:40:29 (none) user.warn kernel: ---[ end trace 652f64ba1e6d2e2b ]---
Oct 13 20:40:34 (none) user.info kernel: bootsplash: status on console 0 changed to on
Oct 13 22:40:35 (none) auth.info login[3954]: root login on 'tty1'
Oct 13 22:40:35 (none) auth.info login[3956]: root login on 'tty2'
Oct 13 22:40:35 (none) auth.info login[3959]: root login on 'tty3'
Oct 13 22:40:35 (none) auth.info login[3964]: root login on 'tty4'
Oct 13 20:40:38 (none) user.debug kernel: eth0: no IPv6 routers present
Oct 13 20:40:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:40:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi_result (err -16)
Oct 13 20:41:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_debug (err -16)
Oct 13 20:41:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi_result (err -16)
Oct 13 20:41:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:41:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_alloc (err -16)
Oct 13 20:42:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_debug (err -16)
Oct 13 20:42:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_unmap (err -16)
Oct 13 20:42:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_alloc (err -16)
Oct 13 20:42:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:42:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_firmware_check (err -16)
Oct 13 20:43:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_unmap (err -16)
Oct 13 20:43:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi (err -16)
Oct 13 20:43:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_firmware_check (err -16)
Oct 13 20:43:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:43:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_prepare (err -16)
Oct 13 20:44:27 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:27 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_vapi (err -16)
Oct 13 20:44:29 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:29 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_init_on_first_open (err -16)
Oct 13 20:44:57 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:57 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_prepare (err -16)
Oct 13 20:44:59 (none) user.warn kernel: ivtvfb: gave up waiting for init of module ivtv.
Oct 13 20:44:59 (none) user.warn kernel: ivtvfb: Unknown symbol ivtv_udma_setup (err -16)
Oct 13 22:45:00 (none) user.err vdr: [6927] pvr350: Can't open video decoder device
Oct 13 22:45:00 (none) user.err vdr: [6927] ERROR: no OSD provider available - using dummy OSD!
--- End code ---
beim Starten:
--- Code: ---/var/log/sysinit
Sat Oct 13 20:40:04 UTC 2012
Copy initramfs to tmpfs: done
Preparing root as aufs: done
Import system device: /dev/hda1
Turn on DMA:
done
Checking:
done
Mounting:
done
Mounting read-write system directory:
done
Setting up logging: level 1
done
Setting up netware:
done
Importing addon: locales
done
Importing addon: network
done
Importing addon: webserver
done
Importing addon: remote-autodetect
done
Importing addon: vdr
done
Importing addon: addons
done
Importing addon: setup
done
Importing addon: backup
done
Importing addon: pvr350
done
Importing addon: dvb
done
Import all further filesystems:
Turn on DMA:
Checking:
done
Mounting:
done
locales:
Setting timezone:
done
Load keymap: de-latin1
done
vdr:
Loading dvb driver
done
pvr350: 22:40:17 pvr350: Start autodetection of decoder device
pvr350: 22:40:17 pvr350: Found decoder device on /dev/video16
pvr350: 22:40:17 pvr350: Cannot find framebuffer
VDR exits at Sa Okt 13 22:40:17 CEST 2012
Starting VDR
done
network:
webserver:
addons:
setup:
Unloading dvb driver
done
Loading dvb driver
Loading network driverdone
Starting DHCP-clientdone
Starting webserver:
done
Setting up setup menu:
done
--- End code ---
Alles der Reihe nach gemacht wie angegeben...
Schade.
--- End quote ---
Welche MLD Version nutzt du? 3.0.1? Wenn möglich im Browser die MLD erst mal auf devel stellen.
Welches Loglevel ist eingestellt?
Hast du DVB Driver auf Auto gestellt, oder ivtv,ivtvfb manuell angegeben?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version