Archiv > General

Sensors, Um Drehzahl Auszulesen

<< < (10/10)

Andy:
Hi,
zurück zum Thema...
entweder ist mir diese Massage bisher noch nie aufgefallen - oder diese wurde durch ein Update "verursacht".

...wir haben ja bekanntlich den it87 Chip...

Jun 14 14:06:06 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Jun 14 14:06:06 (none) user.info kernel: ACPI: Power Button [PWRB]
Jun 14 14:06:06 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Jun 14 14:06:06 (none) user.info kernel: it87: Found IT8712F chip at 0x290, revision 8
Jun 14 14:06:06 (none) user.info kernel: it87: VID is disabled (pins used for GPIO)
Jun 14 14:06:06 (none) user.info kernel: ACPI: Power Button [PWRF]
Jun 14 14:06:06 (none) user.warn kernel: ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region _SB_.PCI0.SBRG.SIOR.ECRE 1 (20120111/utaddress-251)
Jun 14 14:06:06 (none) user.info kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jun 14 14:06:06 (none) user.warn kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Jun 14 16:06:06 (none) daemon.info acpid: starting up with proc fs

...was heißt/bedeutet "VID is disabled (pins used for GPIO)" ?


MFG
Andre

Matthias:
Bei mir schaut das so aus und alles geht so wie es soll....


--- Code: ---Jun 14 18:07:47 (none) user.info kernel: ACPI: Power Button [PWRB]
Jun 14 18:07:47 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
Jun 14 18:07:47 (none) user.info kernel: ACPI: Power Button [PWRF]
Jun 14 18:07:47 (none) user.info kernel: ACPI: Fan [FAN] (on)
Jun 14 18:07:47 (none) user.info kernel: it87: Found IT8716F chip at 0x290, revision 3
Jun 14 18:07:47 (none) user.warn kernel: ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region IP__ 1 (20120111/utaddress-251)
Jun 14 18:07:47 (none) user.warn kernel: ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region _SB_.PCI0.ASOC.HWRE 2 (20120111/utaddress-251)
Jun 14 18:07:47 (none) user.notice kernel: ACPI: This conflict may cause random problems and system instability
Jun 14 18:07:47 (none) user.info kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jun 14 18:07:47 (none) user.warn kernel: ACPI Warning: For _TZ_.THRM._PSL: Return Package has no elements (empty) (20120111/nspredef-463)
Jun 14 18:07:47 (none) user.err kernel: ACPI: [Package] has zero elements (f237f740)
Jun 14 18:07:47 (none) user.warn kernel: ACPI: Invalid passive threshold
Jun 14 18:07:48 (none) user.warn kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Jun 14 18:07:48 (none) user.info kernel: thermal LNXTHERM:00: registered as thermal_zone0
Jun 14 18:07:48 (none) user.info kernel: ACPI: Thermal Zone [THRM] (40 C)

--- End code ---

Board ist ein ASUS M3N78-Pro

baltic:
Hallo,

genau diese Meldungen habe ich auch auf meinem Arbeitsrechner mit Asus M2N und Athlon X2, wenn ich den it87-Treiber lade.

Deshalb verzichte ich darauf und so wird automatisch beim Boot das Modul asus_atk0110 genutzt. Damit klappt alles bestens. Ist das inzw. verfügbar?

Gruß
baltic

Navigation

[0] Message Index

[*] Previous page