Archiv > Bugs & Test Berichte

Erfahrungsbericht Mld-2.0.0-smt

<< < (6/18) > >>

Nobody28:
Klar, das wird aber lang ;-)

Jan 17 14:59:15 (none) syslog.info syslogd started: BusyBox v1.9.2
Jan 17 14:59:15 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-01-16 03:12:34 CET)
Jan 17 14:59:15 (none) user.info kernel: kjournald starting.  Commit interval 5 seconds
Jan 17 14:59:15 (none) user.warn kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 17 14:59:15 (none) user.info kernel: EXT3 FS on hda1, internal journal
Jan 17 14:59:15 (none) user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 17 14:59:15 (none) user.notice kernel: klogd started: BusyBox v1.9.2 (2009-01-16 03:12:34 CET)
Jan 17 14:59:16 (none) user.info kernel: w83627hf: Found W83627HF chip at 0x290
Jan 17 14:59:16 (none) user.info kernel: i2c /dev entries driver
Jan 17 14:59:16 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:1f.3 -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan 17 14:59:16 (none) user.info kernel: FS453/4 driver, © 2005 Freescale Semiconductor, Inc.
Jan 17 14:59:16 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan 17 14:59:16 (none) user.debug kernel: PCI: setting IRQ 11 as level-triggered
Jan 17 14:59:16 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan 17 14:59:16 (none) user.warn kernel: i810-i2c: Probe DDC1 Bus
Jan 17 14:59:16 (none) user.warn kernel: i2c-adapter i2c-1: unable to read EDID block.
Jan 17 14:59:16 (none) user.warn kernel: i2c-adapter i2c-1: unable to read EDID block.
Jan 17 14:59:16 (none) user.warn kernel: i2c-adapter i2c-1: unable to read EDID block.
Jan 17 14:59:16 (none) user.warn kernel: i810-i2c: Probe DDC2 Bus
Jan 17 14:59:17 (none) user.warn kernel: i2c-adapter i2c-2: unable to read EDID block.
Jan 17 14:59:17 (none) user.warn kernel: i2c-adapter i2c-2: unable to read EDID block.
Jan 17 14:59:17 (none) user.warn kernel: i2c-adapter i2c-2: unable to read EDID block.
Jan 17 14:59:17 (none) user.warn kernel: i810-i2c: Probe DDC3 Bus
Jan 17 14:59:17 (none) user.warn kernel: i810-i2c: Getting EDID from BIOS
Jan 17 14:59:17 (none) user.warn kernel: i810fb_init_pci: DDC probe successful
Jan 17 14:59:17 (none) user.warn kernel: i810fb_init_pci: Unable to get Mode Database
Jan 17 14:59:21 (none) user.info kernel: FS453: TV encoder present, ID=0xFE05
Jan 17 14:59:21 (none) user.warn kernel: driver_bound: device 2-006a already bound
Jan 17 14:59:21 (none) user.info kernel: FS453: switching:
Jan 17 14:59:21 (none) user.info kernel: FS453: switched to PAL
Jan 17 14:59:21 (none) user.warn kernel: Console: switching to colour frame buffer device 90x36
Jan 17 14:59:21 (none) user.warn kernel: I810FB: fb0         : Intel® 815 (Internal Graphics with AGP) Framebuffer Device v0.9.0
Jan 17 14:59:21 (none) user.warn kernel: I810FB: Video RAM   : 8192K
Jan 17 14:59:21 (none) user.warn kernel: I810FB: Monitor     : H: 30-55 KHz V: 50-60 Hz
Jan 17 14:59:21 (none) user.warn kernel: I810FB: Mode        : 720x576-24bpp@59Hz
Jan 17 14:59:21 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 14:59:21 (none) user.info kernel: FS453: switching:
Jan 17 14:59:21 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 14:59:21 (none) user.info kernel: FS453: switched to PAL
Jan 17 14:59:21 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 14:59:21 (none) user.info kernel: FS453: switching:
Jan 17 14:59:21 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 14:59:21 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 14:59:21 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:06 (none) user.info kernel: ACPI: PCI Interrupt 0000:00:1f.5 -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan 17 15:00:06 (none) user.debug kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jan 17 15:00:06 (none) user.info kernel: intel8x0_measure_ac97_clock: measured 50045 usecs
Jan 17 15:00:06 (none) user.info kernel: intel8x0: clocking to 48000
Jan 17 15:00:07 (none) user.info kernel: Linux video capture interface: v2.00
Jan 17 15:00:07 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
Jan 17 15:00:07 (none) user.info kernel: cx88[0]: subsystem: 18ac:dc00, board: Samsung SMT 7020 DVB-S [card=79,autodetected], frontend(s): 1
Jan 17 15:00:07 (none) user.info kernel: cx88[0]: TV tuner type 4, Radio tuner type -1
Jan 17 15:00:07 (none) user.warn kernel: !!Samsung RESET done.
Jan 17 15:00:07 (none) user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Jan 17 15:00:07 (none) user.info kernel: ACPI: PCI Interrupt 0000:01:04.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan 17 15:00:07 (none) user.info kernel: cx88[0]/2: found at 0000:01:04.2, rev: 5, irq: 11, latency: 64, mmio: 0xf6000000
Jan 17 15:00:07 (none) user.info kernel: cx8802_probe() allocating 1 frontend(s)
Jan 17 15:00:07 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
Jan 17 15:00:07 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Jan 17 15:00:07 (none) user.info kernel: cx88[0]/2: subsystem: 18ac:dc00, board: Samsung SMT 7020 DVB-S [card=79]
Jan 17 15:00:07 (none) user.info kernel: cx88[0]/2: cx2388x based DVB/ATSC card
Jan 17 15:00:08 (none) user.info kernel: DVB: registering new adapter (cx88[0])
Jan 17 15:00:08 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Jan 17 15:00:08 (none) user.info kernel: usbcore: registered new interface driver ttusb
Jan 17 15:00:08 (none) user.info kernel: usbcore: registered new interface driver ttusb-dec
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_a800
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_dibusb_mc
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_dtt200u
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_umt_010
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_vp7045
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_cxusb
Jan 17 15:00:09 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_dibusb_mb
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_digitv
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_gp8psk
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_nova_t_usb2
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_vp702x
Jan 17 15:00:10 (none) user.info kernel: dib0700: loaded with support for 8 different device-types
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jan 17 15:00:10 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_ttusb2
Jan 17 15:00:11 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_af9005
Jan 17 15:00:11 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_au6610
Jan 17 15:00:11 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_gl861
Jan 17 15:00:11 (none) user.info kernel: usbcore: registered new interface driver dvb_usb_m920x
Jan 17 15:00:12 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Jan 17 15:00:12 (none) user.info kernel: usbcore: registered new interface driver b2c2_flexcop_usb
Jan 17 15:00:12 (none) user.info kernel: opera: start downloading fpga firmware dvb-usb-opera1-fpga-01.fw
Jan 17 15:00:18 (none) user.info kernel: dvb-usb: found a 'Opera1 DVB-S USB2.0' in warm state.
Jan 17 15:00:18 (none) user.warn kernel: i2c-adapter i2c-5: SMBus Quick command not supported, can't probe for chips
Jan 17 15:00:18 (none) user.info kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 17 15:00:18 (none) user.info kernel: DVB: registering new adapter (Opera1 DVB-S USB2.0)
Jan 17 15:00:18 (none) user.info kernel: dvb-usb: MAC address: 00:e0:4f:00:0d:da
Jan 17 15:00:18 (none) user.warn kernel: DVB: registering adapter 1 frontend 0 (ST STV0299 DVB-S)...
Jan 17 15:00:18 (none) user.info kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input0
Jan 17 15:00:18 (none) user.info kernel: dvb-usb: schedule remote query interval to 200 msecs.
Jan 17 15:00:18 (none) user.info kernel: dvb-usb: Opera1 DVB-S USB2.0 successfully initialized and connected.
Jan 17 15:00:18 (none) user.info kernel: usbcore: registered new interface driver opera1
Jan 17 15:00:19 (none) user.info kernel: usbcore: registered new interface driver pvrusb2
Jan 17 15:00:19 (none) user.info kernel: pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
Jan 17 15:00:19 (none) user.info kernel: pvrusb2: Debug mask is 31 (0x1f)
Jan 17 15:00:19 (none) user.warn kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
Jan 17 15:00:19 (none) user.warn kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Jan 17 15:00:19 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 7
Jan 17 15:00:19 (none) user.debug kernel: PCI: setting IRQ 7 as level-triggered
Jan 17 15:00:19 (none) user.info kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 7 (level, low) -> IRQ 7
Jan 17 15:00:19 (none) user.debug kernel: PCI: Setting latency timer of device 0000:01:08.0 to 64
Jan 17 15:00:19 (none) user.info kernel: eth0: OEM i82557/i82558 10/100 Ethernet, 00:00:f0:20:cc:73, IRQ 7.
Jan 17 15:00:19 (none) user.info kernel:   Board assembly ffffff-255, Physical connectors present: RJ45 BNC AUI MII
Jan 17 15:00:19 (none) user.info kernel:   Primary interface chip unknown-15 PHY #31.
Jan 17 15:00:19 (none) user.info kernel:     Secondary interface chip i82555.
Jan 17 15:00:19 (none) user.info kernel:   General self-test: passed.
Jan 17 15:00:19 (none) user.info kernel:   Serial sub-system self-test: passed.
Jan 17 15:00:19 (none) user.info kernel:   Internal registers self-test: passed.
Jan 17 15:00:19 (none) user.info kernel:   ROM checksum self-test: passed (0x04f4518b).
Jan 17 15:00:21 (none) user.info kernel: Adding 524280k swap on /mnt/hda1/data/swap.  Priority:-1 extents:135 across:1018520k
Jan 17 15:00:21 (none) user.err vdr: [4571] cTimeMs: using monotonic clock (resolution is 999848 ns)
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] init
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Supported video Modes are:
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Enumerating display Layers
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Configuring CooperativeLevel for OSD
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] (osdLayer): flags, options, pixelformat: 0000000f, 00000000 00300c02
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] (osdLayer): width, height:               720 576
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] osdLayer without !! alpha channel
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.info kernel: FS453: switching:
Jan 17 15:00:24 (none) user.err kernel: i2c-adapter i2c-2: sendbytes: NAK bailout.
Jan 17 15:00:24 (none) user.info kernel: FS453: switched to PAL
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] surface capabilities for (scrSurface): videoonly, double-buffered, flipping, PixelFormat = 0x00300c02
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] width = 720, height = 576
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] got fmt = 0x00300c02 bpp = 24
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Using this layer for OSD: (FBDev Primary Layer - [720x576])
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] surface capabilities for (osdSurface): videoonly, double-buffered, flipping, PixelFormat = 0x00418c04
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Configuring CooperativeLevel for Overlay
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] surface capabilities for (videoSurface): videoonly, PixelFormat = 0x00200806
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Using this layer for OSD:        FBDev Primary Layer
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Using this layer for Video out:  Intel 810/815 Overlay
Jan 17 15:00:24 (none) user.info vdr: [4571] [dfb] Display frame time is 19997 microseconds
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] (re)configuring Videolayer to 720 x 576 (720x576)
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] surface capabilities for (videoSurface): videoonly, double-buffered, flipping, PixelFormat = 0x08100609
Jan 17 15:00:24 (none) user.debug vdr: [4571] [dfb] (re)configured 0x08100609
Jan 17 15:00:25 (none) user.debug vdr: [4591] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 0
Jan 17 15:00:25 (none) user.debug vdr: [4607] [dfb] (re)configuring Videolayer to 720 x 576 (720x576)
Jan 17 15:00:25 (none) user.err vdr: [4626] [softdevice-audio] Playback reopen error: CH2, No such file or directory
Jan 17 15:00:25 (none) user.debug vdr: [4607] [dfb] surface capabilities for (videoSurface): videoonly, double-buffered, flipping, PixelFormat = 0x08100609
Jan 17 15:00:25 (none) user.debug vdr: [4607] [dfb] (re)configured 0x08100609
Jan 17 15:00:29 (none) user.debug vdr: [4607] [VideoOut] video now synced (76 - -258)
Jan 17 15:00:29 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 15:00:46 (none) user.err vdr: [5316] cTimeMs: using monotonic clock (resolution is 999848 ns)
Jan 17 15:00:46 (none) user.err vdr: [5319] cTimeMs: using monotonic clock (resolution is 999848 ns)
Jan 17 15:00:47 (none) daemon.debug xinetd[5402]: Reading included configuration file: /etc/xinetd.d/telnetd [file=/etc/xinetd.conf] [line=49]
Jan 17 15:00:47 (none) daemon.notice xinetd[5402]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in.
Jan 17 15:00:47 (none) daemon.notice xinetd[5402]: Started working: 1 available service
Jan 17 15:00:53 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867628,075 ms long)
Jan 17 15:00:53 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867874,108 ms long)
Jan 17 15:00:54 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867845,047 ms long)
Jan 17 15:00:55 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867795,314 ms long)
Jan 17 15:00:56 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867832,014 ms long)
Jan 17 15:00:56 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867801,684 ms long)
Jan 17 15:00:56 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867887,712 ms long)
Jan 17 15:00:56 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867806,069 ms long)
Jan 17 15:00:57 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867820,140 ms long)
Jan 17 15:00:58 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867877,615 ms long)
Jan 17 15:01:05 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867880,546 ms long)
Jan 17 15:01:06 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867832,521 ms long)
Jan 17 15:01:06 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867863,820 ms long)
Jan 17 15:01:08 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867781,140 ms long)
Jan 17 15:01:11 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867848,398 ms long)
Jan 17 15:01:11 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867831,352 ms long)
Jan 17 15:01:13 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867747,647 ms long)
Jan 17 15:01:13 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867746,631 ms long)
Jan 17 15:01:13 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867806,166 ms long)
Jan 17 15:01:17 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454866513,948 ms long)
Jan 17 15:01:18 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867822,208 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867791,233 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867886,475 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867822,874 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867844,316 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867787,641 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867818,547 ms long)
Jan 17 15:01:19 (none) user.debug vdr: [4626] [softdevice-audio]: Xrun (at least -454867854,323 ms long)
Jan 17 15:01:22 (none) user.debug vdr: [5474] [softdevice-audio]: Xrun (at least -454867059,896 ms long)
Jan 17 15:01:22 (none) user.debug vdr: [5473] [VideoOut] reset: sync info: repF = 470, drpF = 235, totF = 955
Jan 17 15:01:23 (none) user.debug vdr: [5474] [softdevice-audio]: Xrun (at least -454867811,563 ms long)
Jan 17 15:01:23 (none) user.debug vdr: [5474] [softdevice-audio]: Xrun (at least -454867792,055 ms long)
Jan 17 15:01:25 (none) user.debug vdr: [5475] [VideoOut] video now synced (60 - 383)
 

Matthias:
Schau bitte mal im OSD unter System / VDR Einstellungen / DVB ob das primäre DVB Interface auf 1 steht. Wenn nicht bitte auf 1 setzen.
Die messages sieht erstmal soweit so gut aus.
Bis Du dir zu 100 % sicher das die Verkabelung für die 2. DVB-S Karte (also die Opera) OK ist. Evtl. mal die Kabel von Samsung DVB-S und Opera DVB-S vertauschen.

Grüße

Matthias
 

Nobody28:
Hallo,
das primäre Interface steht auf 3. Egal, ob ich auf 2 oder 1 stelle, dann bekomme ich kein Bild :-(
Verkabelung ist ok! Kann die Kabel vertauschen, oder auch an einen anderen Receiver anklemmen, ich bekomme immer ein Bild.
 

j6scjo:
Hallo zusammen!

So, ich möchte mal meinen anfänglichen Erfahrungsbericht weiterführen.
Dabei hab ich jetzt erstmal Das Einbinden der Opera-Karte weggelassen und wollte erstmal das Burn-Plugin hinbekommen. Das braucht wohl als Vorraussetzung die Pakete projectx und media-tools.
Als ich nun versuchte, über das OSD die media-tools zu installieren, hängte sich die SMT auf. Nach einem Neustart startet der VDR nicht mehr, die SMT kommt wohl noch nicht mal richtig zur Netzwerkinstallation, so dass ich jetzt auch keinen Fernzugriff zur Reparatur habe.
Wenn ich jetzt am Gerät arbeite, kann man sehen, dass der Bootvorgang tatsächlich bei der Installation des media-tools-Paketes hängenbleibt.
Wenn ich jetzt händig die media-tools aus dem addons-Verzeichnis lösche, dann startet die SMT nach einem Neustart ganz normal durch.
Folgende Addons/Plugins sind zusätzlich zur Grundausstattung der mld-2.0-smt-ISO:

perl
live
lan-wireless
samba
ssh
samba-client
backup
bash
mc
noad
projectx

Letztendlich scheint entweder das media-tools-Addon einen Bug zu haben oder es beißt sich mit einem der anderen Addons.

Habt ihr vielleicht Vorschläge zur weiteren Vorgehensweise/Fehlersuche?

Jörg

Holger:
Hi,

die SMT hat recht wenig RAM, nimm mal das 30_MLD-2.0.0_swap-1.0_1.tgz  mit dazu, dann sollte es auch mit mehr Addons klappen.

Und wie gehabt mein Rat: eine zweite MLD-Partition einrichten, um immer ein funktionierendes System zu haben, über das man bei solchen Hängern die SMT schnell sauber booten kann...

Gruß,
Holger

Navigation

[0] Message Index

[#] Next page

[*] Previous page