[5.5] unstable: Hyperion.NG nachinstallieren möglich?

MLD-5.x > General

<< < (13/17) > >>

P3f:
Hallo Matthias,

manchmal hasse ich mein Bauchgefühl....aber es ist wirklich etwas mit den Zugriffsrechten.

Update folgt in ca 5 Minuten.

Bin so gespannt....==> Bitte gerne wieder ein Log bereitstellen, wie im vorherigen Thread.

Danke,

Pit

thueringer01:
Hallo Pit,
update gemacht, auch reboot
Leider noch kein Erfolg:

--- Code: ---2021-01-27T16:06:10.725Z [hyperiond DAEMON] (INFO) CEC handler created
2021-01-27T16:06:10.733Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-01-27T16:06:10.736Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-01-27T16:06:10.736Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects
2021-01-27T16:06:10.766Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-01-27T16:06:10.769Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-01-27T16:06:10.769Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-01-27T16:06:10.885Z [hyperiond DAEMON] (INFO) set screen capture device to 'framebuffer'
2021-01-27T16:06:10.885Z [hyperiond FRAMEBUFFERGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-27T16:06:10.886Z [hyperiond FRAMEBUFFERGRABBER] (ERROR) Error opening /dev/fb0, No such file or directory :
2021-01-27T16:06:10.886Z [hyperiond DAEMON] (INFO) Framebuffer grabber created
2021-01-27T16:06:10.887Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-27T16:06:10.888Z [hyperiond V4L2:AUTO] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 1, Operation not permitted
2021-01-27T16:06:10.888Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2021-01-27T16:06:10.888Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
2021-01-27T16:06:10.888Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2021-01-27T16:06:10.888Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-01-27T16:06:10.888Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2021-01-27T16:06:10.889Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2021-01-27T16:06:10.889Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2021-01-27T16:06:10.892Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-01-27T16:06:10.892Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-01-27T16:06:10.893Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-27T16:06:10.894Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-27T16:06:10.905Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sedu'.
2021-01-27T16:06:10.906Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-01-27T16:06:10.906Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T16:06:10.906Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":110,"delayAfterConnect":250,"hardwareLedCount":1,"latchTime":10,"output":"/dev/ttyUSB0","rate":500000,"rewriteTime":1000,"type":"sedu"}]
2021-01-27T16:06:10.907Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 10ms
2021-01-27T16:06:10.907Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2021-01-27T16:06:10.907Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2021-01-27T16:06:10.909Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType : sedu
2021-01-27T16:06:10.909Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount : 110
2021-01-27T16:06:10.909Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder : rgb
2021-01-27T16:06:10.909Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime : 1000
2021-01-27T16:06:10.910Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime : 10
2021-01-27T16:06:10.910Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName : ttyUSB0
2021-01-27T16:06:10.910Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice : 0
2021-01-27T16:06:10.910Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz : 500000
2021-01-27T16:06:10.910Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 250
2021-01-27T16:06:10.911Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2021-01-27T16:06:10.911Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2021-01-27T16:06:10.912Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-01-27T16:06:10.912Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2021-01-27T16:06:10.918Z [hyperiond EFFECTENGINE] (INFO) Run effect "Plasma" on channel 0
2021-01-27T16:06:10.919Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Plasma], smoothCfg [2]
2021-01-27T16:06:10.919Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-01-27T16:06:10.920Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Plasma' started
2021-01-27T16:06:10.920Z [hyperiond EFFECTENGINE] (INFO) Run effect "Collision" on channel 254
2021-01-27T16:06:10.921Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Collision], smoothCfg [2]
2021-01-27T16:06:10.921Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2021-01-27T16:06:10.921Z [hyperiond HYPERION] (INFO) Initial background effect 'Collision' started
2021-01-27T16:06:10.923Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-27T16:06:10.923Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-27T16:06:10.923Z [hyperiond V4L2:AUTO] (ERROR) Throws error nr: Cannot open '/dev/video0' error code 1, Operation not permitted
2021-01-27T16:06:10.924Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices
2021-01-27T16:06:10.924Z [hyperiond V4L2:AUTO] (INFO) no usable device found
2021-01-27T16:06:10.924Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 230 as inactive
2021-01-27T16:06:10.924Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2021-01-27T16:06:10.924Z [hyperiond FrameBuffer] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-27T16:06:10.929Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-01-27T16:06:10.929Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2021-01-27T16:06:10.950Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-27T16:06:10.951Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-27T16:06:10.953Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2021-01-27T16:06:10.954Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2021-01-27T16:06:10.955Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2021-01-27T16:06:10.950Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-27T16:06:10.962Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-27T16:06:10.962Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName: ttyUSB0
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation: /dev/ttyUSB0
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x0
2021-01-27T16:06:10.980Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier: 0x0
2021-01-27T16:06:10.981Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:
2021-01-27T16:06:10.984Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:173:tryOpen()) delayAfterConnect for 250 ms - start
2021-01-27T16:06:11.029Z [hyperiond FRAMEBUFFERGRABBER] (ERROR) Error opening /dev/fb0, No such file or directory :
2021-01-27T16:06:11.064Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2021-01-27T16:06:11.064Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-27T16:06:11.065Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-01-27T16:06:11.065Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-01-27T16:06:11.106Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
2021-01-27T16:06:11.236Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:180:tryOpen()) delayAfterConnect for 250 ms - finished
2021-01-27T16:06:11.236Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-01-27T16:06:11.236Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T16:06:12.071Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.220.111
2021-01-27T16:06:12.071Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.220.111' switch to Hyperion instance 0
2021-01-27T16:06:14.007Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-01-27T16:06:14.008Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-27T16:06:14.008Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T16:06:14.008Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-01-27T16:06:14.257Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 254
2021-01-27T16:06:14.257Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T16:06:14.257Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[254], previousPriority[0]
2021-01-27T16:06:31.157Z [hyperiond FRAMEBUFFERGRABBER] (ERROR) Previous line repeats 200 times
2021-01-27T16:06:51.257Z [hyperiond FRAMEBUFFERGRABBER] (ERROR) Previous line repeats 200 times
2021-01-27T16:07:02.379Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.220.111
--- End code ---

Grüße
Matthias

P3f:
Hallo Matthias,

ok, als erstmal letzter Versuch ist nun ein weiteres Update online....Bitte wieder Log bereitstellen...

Und die Ausgabe von

--- Code: ---ls -l /dev/ttyUSB0 /dev/video0 /dev/fb0
--- End code ---

Danke,

Pit

thueringer01:
Hallo Pit,
:) :) Grabber läuft, s. Bild, muß jetzt nur noch Feinjustage machen
zuerst vor dem update:

--- Code: ---MLD> ls -l /dev/ttyUSB0 /dev/video0 /dev/fb0
crw-rw---- 1 root video 29, 0 Jan 27 16:58 /dev/fb0
crw-rw---- 1 root dialout 188, 0 Jan 27 16:58 /dev/ttyUSB0
crw-rw---- 1 root video 81, 0 Jan 27 17:42 /dev/video0

--- End code ---
und jetzt mit der Version 2.10:

--- Code: ---MLD> ls -l /dev/ttyUSB0 /dev/video0 /dev/fb0
crw-rw---- 1 root video 29, 0 Jan 27 18:07 /dev/fb0
crw-rw---- 1 root dialout 188, 0 Jan 27 18:07 /dev/ttyUSB0
crw-rw---- 1 root video 81, 0 Jan 27 18:07 /dev/video0

--- End code ---

Das war eine schwere Geburt. Vielen Dank, perfekter Support.
Brauchst du noch was von meiner Maschine?
Luxusproblem: die Hyperion-App kann nicht zugreifen über Port 19444
@Tom, läuft das auch bei dir mit dem Adalight ?

Grüße und Danke
Matthias

thueringer01:
Hallo Pit,
noch das debug-log vom Hyperion:

--- Code: --- 2021-01-27T17:07:33.784Z [hyperiond DAEMON] (INFO) CEC handler created
2021-01-27T17:07:33.791Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-01-27T17:07:33.794Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-01-27T17:07:33.794Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects
2021-01-27T17:07:33.824Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-01-27T17:07:33.826Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-01-27T17:07:33.826Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-01-27T17:07:33.953Z [hyperiond DAEMON] (INFO) set screen capture device to 'framebuffer'
2021-01-27T17:07:33.953Z [hyperiond FRAMEBUFFERGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-27T17:07:33.953Z [hyperiond FRAMEBUFFERGRABBER] (INFO) Display opened with resolution: 800x600@32bit
2021-01-27T17:07:33.953Z [hyperiond DAEMON] (INFO) Framebuffer grabber created
2021-01-27T17:07:33.954Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-27T17:07:33.955Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2021-01-27T17:07:33.955Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2021-01-27T17:07:33.955Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2021-01-27T17:07:33.955Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-01-27T17:07:33.955Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2021-01-27T17:07:33.956Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2021-01-27T17:07:33.957Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2021-01-27T17:07:33.959Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-01-27T17:07:33.961Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-01-27T17:07:33.962Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-01-27T17:07:33.963Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sedu'.
2021-01-27T17:07:33.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":110,"delayAfterConnect":250,"hardwareLedCount":1,"latchTime":10,"output":"/dev/ttyUSB0","rate":500000,"rewriteTime":1000,"type":"sedu"}]
2021-01-27T17:07:33.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 10ms
2021-01-27T17:07:33.963Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType : sedu
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount : 110
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder : rgb
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime : 1000
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime : 10
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName : ttyUSB0
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice : 0
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz : 500000
2021-01-27T17:07:33.964Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 250
2021-01-27T17:07:33.965Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2021-01-27T17:07:33.963Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-27T17:07:33.965Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T17:07:33.965Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2021-01-27T17:07:33.962Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-27T17:07:33.967Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-01-27T17:07:33.968Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2021-01-27T17:07:33.969Z [hyperiond EFFECTENGINE] (INFO) Run effect "Plasma" on channel 0
2021-01-27T17:07:33.970Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Plasma], smoothCfg [2]
2021-01-27T17:07:33.970Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-01-27T17:07:33.970Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Plasma' started
2021-01-27T17:07:33.971Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/COLOR' with priority 254 as inactive
2021-01-27T17:07:33.971Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
2021-01-27T17:07:33.972Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-27T17:07:33.972Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-01-27T17:07:33.972Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-01-27T17:07:33.973Z [hyperiond HYPERION] (INFO) Initial background color set (153 94 25)
2021-01-27T17:07:33.974Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-27T17:07:33.974Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-27T17:07:33.975Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2021-01-27T17:07:33.976Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Composite0
2021-01-27T17:07:33.977Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2021-01-27T17:07:33.978Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:727:init_device()) Pixel format=UYVY
2021-01-27T17:07:33.985Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2021-01-27T17:07:33.985Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-27T17:07:33.976Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 253 as inactive
2021-01-27T17:07:33.976Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2021-01-27T17:07:33.986Z [hyperiond FrameBuffer] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-27T17:07:33.980Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-01-27T17:07:33.987Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2021-01-27T17:07:34.014Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-27T17:07:34.015Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-27T17:07:34.016Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2021-01-27T17:07:34.016Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-27T17:07:34.017Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-27T17:07:34.020Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2021-01-27T17:07:34.020Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2021-01-27T17:07:34.021Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2021-01-27T17:07:34.040Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName: ttyUSB0
2021-01-27T17:07:34.040Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation: /dev/ttyUSB0
2021-01-27T17:07:34.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:
2021-01-27T17:07:34.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:
2021-01-27T17:07:34.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x0
2021-01-27T17:07:34.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier: 0x0
2021-01-27T17:07:34.041Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:
2021-01-27T17:07:34.045Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:173:tryOpen()) delayAfterConnect for 250 ms - start
2021-01-27T17:07:34.101Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 253 is now active
2021-01-27T17:07:34.105Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2021-01-27T17:07:34.107Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2021-01-27T17:07:34.296Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:180:tryOpen()) delayAfterConnect for 250 ms - finished
2021-01-27T17:07:34.296Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-01-27T17:07:34.296Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T17:07:35.245Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.220.111
2021-01-27T17:07:35.246Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.220.111' switch to Hyperion instance 0
2021-01-27T17:07:37.257Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-01-27T17:07:37.257Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-27T17:07:37.257Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]: Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-27T17:07:37.257Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-01-27T17:07:37.507Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-01-27T17:07:37.509Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2021-01-27T17:11:44.539Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Frame too small: 345600 != 691200
2021-01-27T17:24:48.325Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2021-01-27T17:24:49.119Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.220.111
2021-01-27T17:24:49.120Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.220.111' switch to Hyperion instance 0
2021-01-27T17:25:00.361Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.220.111
--- End code ---

Grüße
Matthias

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version