MLD-5.x > Development
update zu MLD5.3 -> Auf Fernbedienung gehen 2 Tasten nicht mehr
MR-Caos:
--- Quote from: clausmuus on April 15, 2017, 13:47:38 ---Lassen sich denn andere Testen mappen?
Und was kommt bei evtest aus dem event11 raus?
--- End quote ---
Hallo,
Die Events auf event3 werden richtig gemapped. Der Empfänger hat event2 und event3.
event11
--- Code: ---Select the device event number [0-11]: 11
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x5a4 product 0x9881 version 0x110
Input device name: "eventlircd"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 272 (BTN_LEFT)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Properties:
Testing ... (interrupt to exit)
--- End code ---
event2
--- Code: ---Select the device event number [0-11]: 2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x5a4 product 0x9881 version 0x110
Input device name: "HID 05a4:9881"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 1 (KEY_ESC)
Event code 2 (KEY_1)
Event code 3 (KEY_2)
Event code 4 (KEY_3)
Event code 5 (KEY_4)
Event code 6 (KEY_5)
Event code 7 (KEY_6)
Event code 8 (KEY_7)
Event code 9 (KEY_8)
Event code 10 (KEY_9)
Event code 11 (KEY_0)
Event code 12 (KEY_MINUS)
Event code 13 (KEY_EQUAL)
Event code 14 (KEY_BACKSPACE)
Event code 15 (KEY_TAB)
Event code 16 (KEY_Q)
Event code 17 (KEY_W)
Event code 18 (KEY_E)
Event code 19 (KEY_R)
Event code 20 (KEY_T)
Event code 21 (KEY_Y)
Event code 22 (KEY_U)
Event code 23 (KEY_I)
Event code 24 (KEY_O)
Event code 25 (KEY_P)
Event code 26 (KEY_LEFTBRACE)
Event code 27 (KEY_RIGHTBRACE)
Event code 28 (KEY_ENTER)
Event code 29 (KEY_LEFTCTRL)
Event code 30 (KEY_A)
Event code 31 (KEY_S)
Event code 32 (KEY_D)
Event code 33 (KEY_F)
Event code 34 (KEY_G)
Event code 35 (KEY_H)
Event code 36 (KEY_J)
Event code 37 (KEY_K)
Event code 38 (KEY_L)
Event code 39 (KEY_SEMICOLON)
Event code 40 (KEY_APOSTROPHE)
Event code 41 (KEY_GRAVE)
Event code 42 (KEY_LEFTSHIFT)
Event code 43 (KEY_BACKSLASH)
Event code 44 (KEY_Z)
Event code 45 (KEY_X)
Event code 46 (KEY_C)
Event code 47 (KEY_V)
Event code 48 (KEY_B)
Event code 49 (KEY_N)
Event code 50 (KEY_M)
Event code 51 (KEY_COMMA)
Event code 52 (KEY_DOT)
Event code 53 (KEY_SLASH)
Event code 54 (KEY_RIGHTSHIFT)
Event code 55 (KEY_KPASTERISK)
Event code 56 (KEY_LEFTALT)
Event code 57 (KEY_SPACE)
Event code 58 (KEY_CAPSLOCK)
Event code 59 (KEY_F1)
Event code 60 (KEY_F2)
Event code 61 (KEY_F3)
Event code 62 (KEY_F4)
Event code 63 (KEY_F5)
Event code 64 (KEY_F6)
Event code 65 (KEY_F7)
Event code 66 (KEY_F8)
Event code 67 (KEY_F9)
Event code 68 (KEY_F10)
Event code 69 (KEY_NUMLOCK)
Event code 70 (KEY_SCROLLLOCK)
Event code 71 (KEY_KP7)
Event code 72 (KEY_KP8)
Event code 73 (KEY_KP9)
Event code 74 (KEY_KPMINUS)
Event code 75 (KEY_KP4)
Event code 76 (KEY_KP5)
Event code 77 (KEY_KP6)
Event code 78 (KEY_KPPLUS)
Event code 79 (KEY_KP1)
Event code 80 (KEY_KP2)
Event code 81 (KEY_KP3)
Event code 82 (KEY_KP0)
Event code 83 (KEY_KPDOT)
Event code 86 (KEY_102ND)
Event code 87 (KEY_F11)
Event code 88 (KEY_F12)
Event code 96 (KEY_KPENTER)
Event code 97 (KEY_RIGHTCTRL)
Event code 98 (KEY_KPSLASH)
Event code 99 (KEY_SYSRQ)
Event code 100 (KEY_RIGHTALT)
Event code 102 (KEY_HOME)
Event code 103 (KEY_UP)
Event code 104 (KEY_PAGEUP)
Event code 105 (KEY_LEFT)
Event code 106 (KEY_RIGHT)
Event code 107 (KEY_END)
Event code 108 (KEY_DOWN)
Event code 109 (KEY_PAGEDOWN)
Event code 110 (KEY_INSERT)
Event code 111 (KEY_DELETE)
Event code 119 (KEY_PAUSE)
Event code 125 (KEY_LEFTMETA)
Event code 126 (KEY_RIGHTMETA)
Event code 127 (KEY_COMPOSE)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Event type 17 (EV_LED)
Event code 0 (LED_NUML) state 1
Event code 1 (LED_CAPSL) state 0
Event code 2 (LED_SCROLLL) state 0
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 250
Repeat code 1 (REP_PERIOD)
Value 33
Properties:
Testing ... (interrupt to exit)
--- End code ---
event3
--- Code: ---Select the device event number [0-11]: 3
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x5a4 product 0x9881 version 0x110
Input device name: "HID 05a4:9881"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 113 (KEY_MUTE)
Event code 114 (KEY_VOLUMEDOWN)
Event code 115 (KEY_VOLUMEUP)
Event code 116 (KEY_POWER)
Event code 128 (KEY_STOP)
Event code 140 (KEY_CALC)
Event code 142 (KEY_SLEEP)
Event code 143 (KEY_WAKEUP)
Event code 144 (KEY_FILE)
Event code 155 (KEY_MAIL)
Event code 156 (KEY_BOOKMARKS)
Event code 158 (KEY_BACK)
Event code 159 (KEY_FORWARD)
Event code 163 (KEY_NEXTSONG)
Event code 164 (KEY_PLAYPAUSE)
Event code 165 (KEY_PREVIOUSSONG)
Event code 166 (KEY_STOPCD)
Event code 171 (KEY_CONFIG)
Event code 172 (KEY_HOMEPAGE)
Event code 173 (KEY_REFRESH)
Event code 209 (KEY_BASSBOOST)
Event code 217 (KEY_SEARCH)
Event code 240 (KEY_UNKNOWN)
Event code 272 (BTN_LEFT)
Event code 273 (BTN_RIGHT)
Event code 274 (BTN_MIDDLE)
Event code 275 (BTN_SIDE)
Event code 276 (BTN_EXTRA)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Event code 8 (REL_WHEEL)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
--- End code ---
MR-Caos:
Hallo,
Hat noch jemand eine Idee warum das event2 nicht mapped? Es wird das event 1:1 durch gereicht an irw es gehen somit auch die Farbtasten auch nicht :(
Grüße
Joe
MR-Caos:
Hallo,
Hier ein quick and dirty hack damit lässt sich zumindest VDR wieder normal bedienen.
Kodi ist eine andere Geschichte.
In /etc/vdr/remote.conf folgende lirc Einträge ersetzen.
--- Code: ---LIRC.Up KEY_UP
LIRC.Down KEY_DOWN
LIRC.Menu KEY_MENU
LIRC.Ok KEY_ENTER
LIRC.Back KEY_BACKSPACE
LIRC.Left KEY_LEFT
LIRC.Right KEY_RIGHT
LIRC.Red KEY_E
LIRC.Green KEY_I
LIRC.Yellow KEY_T
LIRC.Blue KEY_M
LIRC.0 KEY_0
LIRC.1 KEY_1
LIRC.2 KEY_2
LIRC.3 KEY_3
LIRC.4 KEY_4
LIRC.5 KEY_5
LIRC.6 KEY_6
LIRC.7 KEY_7
LIRC.8 KEY_8
LIRC.9 KEY_9
LIRC.Info KEY_INFO
LIRC.Play KEY_PLAY
LIRC.Pause KEY_PAUSE
LIRC.Stop KEY_STOP
LIRC.Record KEY_R
LIRC.FastFwd KEY_F
LIRC.FastRew KEY_B
LIRC.Next KEY_NEXT
LIRC.Prev KEY_BACK
LIRC.Power KEY_POWER2
LIRC.Channel+ KEY_PAGEUP
LIRC.Channel- KEY_PAGEDOWN
LIRC.PrevChannel KEY_PREVIOUS
LIRC.Volume+ KEY_VOLUMEUP
LIRC.Volume- KEY_VOLUMEDOWN
LIRC.Mute KEY_MUTE
LIRC.Audio KEY_MODE
LIRC.Subtitles KEY_SUBTITLE
LIRC.Schedule KEY_EPG
LIRC.Channels KEY_CHANNEL
LIRC.Timers KEY_TIME
LIRC.Recordings KEY_PVR
LIRC.Setup KEY_SETUP
LIRC.Commands KEY_FAVORITES
LIRC.User0 KEY_TEXT
LIRC.User1 KEY_O
LIRC.User2 KEY_PROG2
LIRC.User3 KEY_PROG3
LIRC.User4 KEY_PROG4
LIRC.User5 KEY_AUDIO
LIRC.User6 KEY_VIDEO
LIRC.User7 KEY_IMAGES
LIRC.User8 KEY_FN
LIRC.User9 KEY_SCREEN
--- End code ---
Klemmerle:
Hallo zusammen,
ich habe hier einen rpi3 mit netinstall 5.3 gestested. Die HAMA läuft hier OOTB!
sie wird als event0 und event1 erkannt.
--- Code: ---Available devices:
/dev/input/event0: HID 05a4:9881
/dev/input/event1: HID 05a4:9881
--- End code ---
Bei der rpi3 remote.conf habe ich die Geräte KBD.xxx und LIRC.xxx
Bei meinem x68-system habe ich noch zusätzlich XKeySym.xxx
Ansonsten kann ich aber keinen Unterschied feststellen.
Joe, Du hast "Lirc.ok" auf "KEY_ENTER" gemappt, bei meinen confs ist es beidesmal "KEY_OK".
Bei mir ist auf beiden Systemen die Ausgabe von evtest identisch.
Anbei meine (funktionierende) rpi3- remote.conf:
Spoiler (show / hide)
--- Code: ---KBD.Up 00000000001B5B41
KBD.Down 00000000001B5B42
KBD.Menu 0000000000000020
KBD.Ok 000000000000000D
KBD.Back 000000000000007F
KBD.Back 000000000000001B
KBD.Left 00000000001B5B44
KBD.Left 000000001B5B357E
KBD.Right 00000000001B5B43
KBD.Right 000000001B5B367E
KBD.Red 000000001B5B5B41
KBD.Green 000000001B5B5B42
KBD.Yellow 000000001B5B5B43
KBD.Blue 000000001B5B5B44
KBD.0 0000000000000030
KBD.1 0000000000000031
KBD.2 0000000000000032
KBD.3 0000000000000033
KBD.4 0000000000000034
KBD.5 0000000000000035
KBD.6 0000000000000036
KBD.7 0000000000000037
KBD.8 0000000000000038
KBD.9 0000000000000039
KBD.Power 0000001B5B32347E
KBD.Volume+ 000000000000002B
KBD.Volume- 000000000000002D
KBD.Mute 0000001B5B32307E
KBD.User1 0000000000000071
KBD.User2 0000000000000077
KBD.User3 0000000000000065
KBD.User4 0000000000000072
KBD.User5 0000000000000074
KBD.User6 0000000000000079
KBD.User6 000000000000007A
KBD.User7 0000000000000075
KBD.User8 0000000000000069
KBD.User9 000000000000006F
LIRC.Up KEY_UP
LIRC.Down KEY_DOWN
LIRC.Menu KEY_MENU
LIRC.Ok KEY_OK
LIRC.Back KEY_ESC
LIRC.Left KEY_LEFT
LIRC.Right KEY_RIGHT
LIRC.Red KEY_RED
LIRC.Green KEY_GREEN
LIRC.Yellow KEY_YELLOW
LIRC.Blue KEY_BLUE
LIRC.0 KEY_0
LIRC.1 KEY_1
LIRC.2 KEY_2
LIRC.3 KEY_3
LIRC.4 KEY_4
LIRC.5 KEY_5
LIRC.6 KEY_6
LIRC.7 KEY_7
LIRC.8 KEY_8
LIRC.9 KEY_9
LIRC.Info KEY_INFO
LIRC.Play KEY_PLAY
LIRC.Pause KEY_PAUSE
LIRC.Stop KEY_STOP
LIRC.Record KEY_RECORD
LIRC.FastFwd KEY_FASTFORWARD
LIRC.FastRew KEY_REWIND
LIRC.Next KEY_NEXT
LIRC.Prev KEY_BACK
LIRC.Power KEY_POWER2
LIRC.Channel+ KEY_CHANNELUP
LIRC.Channel- KEY_CHANNELDOWN
LIRC.PrevChannel KEY_PREVIOUS
LIRC.Volume+ KEY_VOLUMEUP
LIRC.Volume- KEY_VOLUMEDOWN
LIRC.Mute KEY_MUTE
LIRC.Audio KEY_MODE
LIRC.Subtitles KEY_SUBTITLE
LIRC.Schedule KEY_EPG
LIRC.Channels KEY_CHANNEL
LIRC.Timers KEY_TIME
LIRC.Recordings KEY_PVR
LIRC.Setup KEY_SETUP
LIRC.Commands KEY_FAVORITES
LIRC.User0 KEY_TEXT
LIRC.User1 KEY_PROG1
LIRC.User2 KEY_PROG2
LIRC.User3 KEY_PROG3
LIRC.User4 KEY_PROG4
LIRC.User5 KEY_AUDIO
LIRC.User6 KEY_VIDEO
LIRC.User7 KEY_IMAGES
LIRC.User8 KEY_FN
LIRC.User9 KEY_SCREEN
--- End code ---
und meine (nicht funktionierende) x86- remote.conf:
Spoiler (show / hide)
--- Code: ---MLD> cat /etc/vdr/remote.conf
KBD.Up 00000000001B5B41
KBD.Down 00000000001B5B42
KBD.Menu 0000000000000020
KBD.Ok 000000000000000D
KBD.Back 000000000000007F
KBD.Back 000000000000001B
KBD.Left 00000000001B5B44
KBD.Left 000000001B5B357E
KBD.Right 00000000001B5B43
KBD.Right 000000001B5B367E
KBD.Red 000000001B5B5B41
KBD.Green 000000001B5B5B42
KBD.Yellow 000000001B5B5B43
KBD.Blue 000000001B5B5B44
KBD.0 0000000000000030
KBD.1 0000000000000031
KBD.2 0000000000000032
KBD.3 0000000000000033
KBD.4 0000000000000034
KBD.5 0000000000000035
KBD.6 0000000000000036
KBD.7 0000000000000037
KBD.8 0000000000000038
KBD.9 0000000000000039
KBD.Power 0000001B5B32347E
KBD.Volume+ 000000000000002B
KBD.Volume- 000000000000002D
KBD.Mute 0000001B5B32307E
KBD.User1 0000000000000071
KBD.User2 0000000000000077
KBD.User3 0000000000000065
KBD.User4 0000000000000072
KBD.User5 0000000000000074
KBD.User6 0000000000000079
KBD.User6 000000000000007A
KBD.User7 0000000000000075
KBD.User8 0000000000000069
KBD.User9 000000000000006F
LIRC.Up KEY_UP
LIRC.Down KEY_DOWN
LIRC.Menu KEY_MENU
LIRC.Ok KEY_OK
LIRC.Back KEY_ESC
LIRC.Left KEY_LEFT
LIRC.Right KEY_RIGHT
LIRC.Red KEY_RED
LIRC.Green KEY_GREEN
LIRC.Yellow KEY_YELLOW
LIRC.Blue KEY_BLUE
LIRC.0 KEY_0
LIRC.1 KEY_1
LIRC.2 KEY_2
LIRC.3 KEY_3
LIRC.4 KEY_4
LIRC.5 KEY_5
LIRC.6 KEY_6
LIRC.7 KEY_7
LIRC.8 KEY_8
LIRC.9 KEY_9
LIRC.Info KEY_INFO
LIRC.Play KEY_PLAY
LIRC.Pause KEY_PAUSE
LIRC.Stop KEY_STOP
LIRC.Record KEY_RECORD
LIRC.FastFwd KEY_FASTFORWARD
LIRC.FastRew KEY_REWIND
LIRC.Next KEY_NEXT
LIRC.Prev KEY_BACK
LIRC.Power KEY_POWER2
LIRC.Channel+ KEY_CHANNELUP
LIRC.Channel- KEY_CHANNELDOWN
LIRC.PrevChannel KEY_PREVIOUS
LIRC.Volume+ KEY_VOLUMEUP
LIRC.Volume- KEY_VOLUMEDOWN
LIRC.Mute KEY_MUTE
LIRC.Audio KEY_MODE
LIRC.Subtitles KEY_SUBTITLE
LIRC.Schedule KEY_EPG
LIRC.Channels KEY_CHANNEL
LIRC.Timers KEY_TIME
LIRC.Recordings KEY_PVR
LIRC.Setup KEY_SETUP
LIRC.Commands KEY_FAVORITES
LIRC.User0 KEY_TEXT
LIRC.User1 KEY_PROG1
LIRC.User2 KEY_PROG2
LIRC.User3 KEY_PROG3
LIRC.User4 KEY_PROG4
LIRC.User5 KEY_AUDIO
LIRC.User6 KEY_VIDEO
LIRC.User7 KEY_IMAGES
LIRC.User8 KEY_FN
LIRC.User9 KEY_SCREEN
XKeySym.Up Up
XKeySym.Down Down
XKeySym.Menu space
XKeySym.Ok Return
XKeySym.Back BackSpace
XKeySym.Back esc
XKeySym.Left Left
XKeySym.Left Prior
XKeySym.Right Right
XKeySym.Right Next
XKeySym.Red F1
XKeySym.Green F2
XKeySym.Yellow F3
XKeySym.Blue F4
XKeySym.0 0
XKeySym.1 1
XKeySym.2 2
XKeySym.3 3
XKeySym.4 4
XKeySym.5 5
XKeySym.6 6
XKeySym.7 7
XKeySym.8 8
XKeySym.9 9
XKeySym.Power F12
XKeySym.Power XF86PowerOff
XKeySym.Power XF86Standby
XKeySym.Volume+ KP_Add
XKeySym.Volume+ plus
XKeySym.Volume+ XF86AudioRaiseVolume
XKeySym.Volume- KP_Subtract
XKeySym.Volume- minus
XKeySym.Volume- XF86AudioLowerVolume
XKeySym.Mute F9
XKeySym.Mute XF86AudioMute
XKeySym.Play XF86AudioPlay
XKeySym.Pause XF86AudioPause
XKeySym.Stop XF86AudioStop
XKeySym.Record XF86AudioRecord
XKeySym.Next XF86AudioNext
XKeySym.Prev XF86AudioPrev
XKeySym.FastFwd XF86AudioForward
XKeySym.FastRew XF86AudioRewind
XKeySym.User1 q
XKeySym.User2 w
XKeySym.User3 e
XKeySym.User4 r
XKeySym.User5 t
XKeySym.User6 y
XKeySym.User6 z
XKeySym.User7 u
XKeySym.User8 i
XKeySym.User9 o
MLD>
--- End code ---
hm.... Gruß Klemens
Klemmerle:
--- Quote from: clausmuus on April 15, 2017, 13:47:38 ---Lassen sich denn andere Testen mappen?
Und was kommt bei evtest aus dem event11 raus?
--- End quote ---
Hallo Claus,
auf dem event11 (eventlircd) liegt nur die Mausfunktion der FB.
Gruß Klemens
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version