MLD-5.x > x86 Systeme (PC)
Installation mit netinstall und old-config
skippy:
hm, habe jetzt auf meinem 32-bit System getestet, da funktioniert die Installation von einer 401-Backup-Config (noch) nicht. Kann es sein, dass du die Anpassungen noch nicht im netinstall.iso von der 32-bit Version eingeflossen sind? Verwendet habe ich "MLD-5.0.0_netinstall_2015.07.30-153+1172_i386".
Hier die Einschaltmeldungen:
--- Code: ---Configure packages:
Setting up libattr1 (2.4.47-~1) ...
Setting up liblzma5 (5.1.1-~1) ...
Setting up kernel (3.16.1.182-190) ...
Setting up busybox (1.23.2-45) ...
Setting up zlib1g (1.2.8-~1) ...
Setting up init (0-83) ...
Setting up psplash (2009.05.28-19) ...
Setting up syslinux (0-7) ...
Setting up libbz2-1.0 (1.0.6-~1) ...
Setting up libkmod2 (18-~1) ...
Setting up dpkg-fixes (0-1) ...
Setting up ldconfig (2.19-0) ...
Setting up dpkg (1.17.25-15) ...
Setting up libacl1 (2.2.52-~1) ...
Setting up liblzo2-2 (2.08-~1) ...
Setting up udev (215-37) ...
Setting up btrfs (3.17-100) ...
done
Copy initramfs to tmpfs:
done
Load preselected kernel modules:
done
Setting up localhost:
done
Starting udev Daemon
done
Turn on DMA:
Checking filesystems:
done
Mounting filesystems:
done
Searching for boot device:
Searching for boot device: -
Searching for boot device: /
Boot device is: /dev/sdc1
done
Install packages:
Selecting previously unselected package apt.
(Reading database ... 377 files and directories currently installed.)
Preparing to unpack /mnt/bootfs/dpkg/apt.deb ...
Unpacking apt (1.0.9.8-51) ...
Selecting previously unselected package backup.
Preparing to unpack /mnt/bootfs/dpkg/backup.deb ...
Unpacking backup (1-19) ...
Selecting previously unselected package extlinux.
Preparing to unpack /mnt/bootfs/dpkg/extlinux.deb ...
Unpacking extlinux (0-10) ...
Selecting previously unselected package install-net.
Preparing to unpack .../bootfs/dpkg/install-net.deb ...
Unpacking install-net (0-59) ...
Selecting previously unselected package install.
Preparing to unpack /mnt/bootfs/dpkg/install.deb ...
Unpacking install (0-119) ...
Selecting previously unselected package libapt-pkg4.12.
Preparing to unpack .../bootfs/dpkg/libapt-pkg4.12.deb ...
Unpacking libapt-pkg4.12 (1.0.9.8-~1) ...
Selecting previously unselected package libconsole.
Preparing to unpack .../mnt/bootfs/dpkg/libconsole.deb ...
Unpacking libconsole (0.2.3-~3) ...
Selecting previously unselected package libgcc1.
Preparing to unpack /mnt/bootfs/dpkg/libgcc1.deb ...
Unpacking libgcc1 (4.9.2-~1) ...
Selecting previously unselected package libstdc++6.
Preparing to unpack .../mnt/bootfs/dpkg/libstdc++6.deb ...
Unpacking libstdc++6 (4.9.2-~1) ...
Selecting previously unselected package live.
Preparing to unpack /mnt/bootfs/dpkg/live.deb ...
Unpacking live (0-30) ...
Selecting previously unselected package locales.
Preparing to unpack /mnt/bootfs/dpkg/locales.deb ...
Unpacking locales (0-21) ...
Selecting previously unselected package network.
Preparing to unpack /mnt/bootfs/dpkg/network.deb ...
Unpacking network (0-58+3.16.1.182) ...
Selecting previously unselected package ssh.
Preparing to unpack /mnt/bootfs/dpkg/ssh.deb ...
Unpacking ssh (0-13) ...
Selecting previously unselected package webserver.
Preparing to unpack /mnt/bootfs/dpkg/webserver.deb ...
Unpacking webserver (0-226) ...
Selecting previously unselected package xfs.
Preparing to unpack /mnt/bootfs/dpkg/xfs.deb ...
Unpacking xfs (0-5) ...
Setting up backup (1-19) ...
Setting up extlinux (0-10) ...
Setting up libconsole (0.2.3-~3) ...
Setting up libgcc1 (4.9.2-~1) ...
Setting up libstdc++6 (4.9.2-~1) ...
Setting up live (0-30) ...
Setting up locales (0-21) ...
Setting up network (0-58+3.16.1.182) ...
Setting up ssh (0-13) ...
Creating ssh rsa key:
done
Creating ssh dss key:
done
Setting up webserver (0-226) ...
Setting up xfs (0-5) ...
Setting up install (0-119) ...
Setting up libapt-pkg4.12 (1.0.9.8-~1) ...
Setting up apt (1.0.9.8-51) ...
Setting up install-net (0-59) ...
done
Setting LANG:
Setting time:
done
Load keymap: de-latin1
done
Starting acpid
done
Init networking
Starting DHCP-client
done
Waiting for network connection on device:
Waiting for network connection on device: -
Starting webserver:
done
Das Webinterface ist über http://MLD-Esprimo.fritz.box erreichbar.
Starting ssh:
Listen on IP: 10.132.128.102
done
Starting ntp-client
done
Setting time:
done
Load keymap: de-latin1
done
Load preselected kernel modules:
done
Setting up localhost:
done
Starting udev Daemon
done
Turn on DMA:
Checking filesystems:
done
Mounting filesystems:
done
Init network
Starting DHCP-client
done
Waiting for network connection:
Waiting for network connection: -
Waiting for network connection: /
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
live
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 152 kB disk space will be freed.
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2015-07-31 16:55'
(Reading database ...
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 868 files and directories currently installed.)
Removing live (0-31) ...
Install config file:
grep: bad regex '1': Invalid back reference
done
Ign http://www.minidvblinux.de testing InRelease
Ign http://www.minidvblinux.de testing Release.gpg
Ign http://www.minidvblinux.de testing Release
Get:1 http://www.minidvblinux.de testing/main i386 Packages/DiffIndex
Get:2 http://www.minidvblinux.de testing/main i386 Packages
Ign http://www.minidvblinux.de testing/main Translation-de_DE
Ign http://www.minidvblinux.de testing/main Translation-de
Ign http://www.minidvblinux.de testing/main Translation-en
Fetched 604 kB in 1s (334 kB/s)
Reading package lists...
Reading package lists...
E: Unable to locate package opkg
E: Package 'opkg-fixes' has no installation candidate
E: Unable to locate package vdr-plugin-opkg
Building dependency tree...
Reading state information...
Package opkg-fixes is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
dpkg-fixes
Starting webserver:
done
Starting ssh:
Listen on IP: 10.132.128.102
done
Starting acpid
done
Starting ntp-client
done
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
install-net
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 119 kB disk space will be freed.
(Reading database ...
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 851 files and directories currently installed.)
Removing install-net (0-59) ...
--- End code ---
Viele Grüße skippy
MegaX:
Hi skippy
aus irgendeinem Grund waren einige Pakete aufm 32-bit nicht gebaut.
Hab das jetzt nachgeholt und es gibt auch ein neues ISO.
Kannst du damit mal testen obs geht?
Danke dir
skippy:
Hallo MegaX,
nein, leider auch mit "MLD-5.0.0_netinstall_2015.07.31-153+1176_i386" keine Änderung.
Viele Grüße skippy
//edit: habe mal die Backup-Config bei gepackt, falls ihr testen wollt.
skippy:
Nur damit ihr nicht in die falsche Richtung sucht: Ich habe jetzt noch mal das 64_bit netinstall.iso mit der 4.0.1 backup-config getestet. Auch da klappt es nicht.
Viele Grüße skippy
skippy:
Hallo zusammen,
ich habe mal noch ein bisschen weiter getestet und irgendwie ist das ziemlich merkwürdig. Ich habe unterschiedliche backup-configs mit aktuellen ISOs (32 + 64 bit getestet) auf unterschiedlichen Rechnern getestet. Zusammengefasst ist das Ergebnis, dass nur das backup-config File vom Server auf der Hardware vom Server funktioniert hat. Auch das backup-config vom SD-Client1 auf dem Server ist gescheitert. Auf dem SD-Client1 (ist übrigens inzwischen andere Hardware, muss mal die Signatur anpassen) und auf dem HD-Client habe ich keine Installation mit dem backup-config erfolgreich abschließen können. Immer gleiches Fehlerbild.
Die momentan einzige Erklärung, die ich habe, ist ein Timing Problem mit dem Netzwerk. Darauf gekommen bin ich, als ich den Thread von Claus gelesen habe, dass er das Netzwerk überarbeitet hat. Die für mich entscheidenden Fehlermeldungen sind:
--- Code: ---Reading package lists...
E: Unable to locate package opkg
E: Package 'opkg-fixes' has no installation candidate
E: Unable to locate package vdr-plugin-opkg
Building dependency tree...
Reading state information...
Package opkg-fixes is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
dpkg-fixes
Starting webserver:
done
Starting ssh:
Listen on IP: 10.132.128.101
done
Starting acpid
done
Starting ntp-client
done
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
install-net
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 61,4 kB disk space will be freed.
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2015-08-01 13:43'
--- End code ---
Das System findet das Paket opkg nicht, das von opkg-fixes benötigt wird. Ebenso findet er das vdr-plugin-opkg nicht. Erst danach erfolgt der Start des Netzwerks. Kann das daran liegen, dass hier das Netzwerk zu spät gestartet wird?
Viele Grüße skippy
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version