Archiv > Development

Test MLD-4.0.1-64 ISO

<< < (53/55) > >>

gkd-berlin:
Hallo,

Test: MLD-4.0.1-64_ff-hd_2014.10.02-77.iso  vom 2.10.  2:41h

Tools, zur Anzeige der Vendor/Device ID´s, nachinstalliert. Keine Probleme. Alles ok.  :D

Gruß Gerhard

gkd-berlin:
Hallo,

Test: MLD-4.0.1-64_ff-hd_2014.11.28-81.iso  vom 30.11.  6:08h

nach langer Zeit wieder einmal ein Test.

1. Start vom Stick. Angepasstes Image.
Kein Bild + Ton. Jede Menge Fehlermeldungen auf der Konsole.

WebIf: Diese Seite ist nicht verfügbar.
Putty:  Zugriff geht. mc ist nicht vorhanden.


--- Code: ---opkg install mc
--- End code ---
Es kommen einige Fehlermeldungen, mc funktioniert trotzdem.

Hier die Sysinit und Messages:


--- Code: ---Sysinit:

Searching for boot device: | ^MSearching for boot device: / ^MSearching for boot device: - ^MSearching for boot devi
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Install packages:
Creating ssh rsa key:
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Creating ssh dss key:
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for graphlcd-base:
 * <--->libusb-0.1-4 (>= 0.1.12-1) * <->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) * <->libfreetype6 (>= 2.5
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for lirc:
 * <--->liblircclient0 (>= 0.9.0-1) * <>libasound2 (>= 1.0.27.2-1) * <->libusb-0.1-4 (>= 0.1.12-1) * <->libusb-1.0-0
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for mc:
 * <--->libslang2 (>= 2.2.4-1) * <----->libgpm2 (>= 1.20.4-1) * <------>e2fslibs (>= 1.42.9-2) * <----->libssh2-1 (>
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for perl:
 * <--->perl-base (>= 5.18.2-1) * <---->libgdbm3 (>= 1.8.3-2) * <------>libdb5.3 (>= 5.3.28-1) * <----->libssl1.0.0
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for samba:
 * <--->samba-libs (>= 4.1.6-64) * <--->libtalloc2 (>= 2.1.0-1) * <---->libbsd0 (>= 0.6.0-1) * >libtevent0 (>= 0.9.1
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for sensors:
 * <--->libsensors4 (>= 3.3.4-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for udevil:
 * <--->libglib2.0-0 (>= 2.40.0-5) * <->libsigsegv2 (>= 2.10-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-clock:
 * <--->libjpeg-turbo8 (>= 1.3.0-1) * <>libcap2 (>= 2.24-1) * <>libtinyxml2.6.2 (>= 2.6.2-1) * >libfontconfig1 (>= 2
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-devstatus:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-dvbhddevice:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-epgsearch:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-extrecmenu:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-femon:
 * <--->dvb-apps (>= 1.1.1-1) * <------>libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-graphlcd:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-opkg:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-osdpip:
 * <--->libavcodec55-ffmpeg (>= 2.2.3-1) * <--->libswscale2-ffmpeg (>= 2.2.3-1) * <---->libstdc++6 (>= 4.8.2-1) * <>
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-remote:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-setup:
 * <--->libtinyxml2.6.2 (>= 2.6.2-1) * >libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-streamdev-server:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-setup:
 * <--->libtinyxml2.6.2 (>= 2.6.2-1) * >libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-streamdev-server:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-systeminfo:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vdr-plugin-tvguide:
 * <--->libmagick++5 (>= 6.7.7.10-1) * >libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) * <->libmagickwand5 (>= 6
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for webserver:
 * <--->libstdc++6 (>= 4.8.2-1) * <---->libgcc1 (>= 4.9-1) *.
Installing bash (4.3.11-2) on root.
Installing btrfs (3.12-83) on root.
Installing dvb (2014.11.12-82_3.16.1.101) on root.
Installing i2c (0-2_3.16.1.101) on root.
Installing eventlircd (2014.09.09-20_3.16.1.101) on root.
Installing irkeytable (1.0.1-7) on root.
Installing font-config (0-4) on root.
Installing graphlcd-base (2014.05.10-16_3.16.1.101) on root.
Installing hdparm (9.43-2) on root.
i2c (0-2_3.16.1.101) already installed on root.
Installing install (0-58) on root.
Installing xfs (0-5) on root.
irkeytable (1.0.1-7) already installed on root.
Installing libmagickcore5 (6.7.7.10-3) on root.
Installing lirc (1:2014.05.09-47_3.16.1.101) on root.
Installing locales (0-15) on root.
Installing mc (4.8.11-2) on root.
Installing mld-remote (0-30) on root.
Installing lirc (1:2014.05.09-47_3.16.1.101) on root.
Installing network (0-42_3.16.1.101) on root.
Installing perl (5.18.2-8) on root.
Installing samba (4.1.6-17) on root.
Installing sensors (3.3.4-5_3.16.1.101) on root.
Installing ssh (0-11) on root.
Installing udevil (2014.05.10-15) on root.
Installing usb (0-4_3.16.1.101) on root.
Installing vdr-plugin-clock (1.0.0-1_2.1.6.141) on root.
Installing vdr-plugin-devstatus (0.4.1-1_2.1.6.141) on root.
Installing vdr-plugin-dvbhddevice (2.1.6-11_2.1.6.141) on root.
Installing vdr-plugin-epgsearch (2014.03.16-8_2.1.6.141) on root.
Installing vdr-plugin-extrecmenu (2014.08.20-4_2.1.6.141) on root.
Installing vdr-plugin-femon (2.1.1-5_2.1.6.141) on root.
Installing vdr-plugin-graphlcd (2013.01.27-13_2.1.6.141) on root.
Installing vdr-plugin-opkg (0.1.0-21_2.1.6.141) on root.
Installing vdr-plugin-osdpip (2012.05.16-2_2.1.6.141) on root.
Installing vdr-plugin-remote (0.4.0-11_2.1.6.141) on root.
Installing vdr-plugin-setup (0.3.1-24_2.1.6.141) on root.
Installing vdr-plugin-streamdev-server (2014.11.20-6_2.1.6.141) on root.
Installing vdr-plugin-systeminfo (0.1.3-7_2.1.6.141) on root.
Installing vdr-plugin-tvguide (2014.09.27-5_2.1.6.141) on root.
Installing vdr (2.1.6.141-143) on root.
Installing vdradmin-am (2014.08.15-0.4) on root.
Installing perl (5.18.2-8) on root.
Installing vfat (0-1) on root.
Installing wakeup (1.1-11_3.16.1.101) on root.
Installing webserver (0-178) on root.
xfs (0-5) already installed on root.
Configuring libc6.
Configuring libuuid1.
Configuring libblkid1.
Configuring zlib1g.
Configuring liblzo2-2.
Configuring btrfs.
Configuring ldconfig.
Configuring libbz2-1.0.
Configuring locales.
Configuring libnih1.
Configuring libnettle4.
Configuring libattr1.
Configuring liblzma5.
Configuring libxml2.
Configuring libarchive13.
Configuring opkg.
Configuring busybox.
Configuring kernel.
Configuring i2c.
Configuring libtinfo5.
Configuring libncursesw5.
Configuring base.
Configuring bash.
Configuring libpcre3.
Configuring libselinux1.
Configuring libmagickcore5.
Configuring irkeytable.
Configuring libdbus-1-3.
Configuring libnih-dbus1.
Configuring libcgmanager0.
Configuring libudev1.
Configuring eventlircd.
Configuring init.
Configuring lirc.
Configuring font-config.
Configuring vdr.
Configuring wakeup.
Configuring libkmod2.
Configuring libacl1.
Configuring xfs.
Configuring install.
Configuring network.
Configuring perl.
Configuring udev.
Configuring hdparm.
Configuring vfat.
Configuring ssh.
Configuring vdradmin-am.
Configuring psplash.
Configuring usb.
Configuring dvb.
Configuring mld-remote.
^[[1A^[[1000C^[[10D^[[1;31mfailed^[[0;39m

Copy initramfs to tmpfs:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Load preselected kernel modules:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting udev Daemon
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Setting up localhost:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Setting LANG:
Setting time:
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Load keymap: de-latin1
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Initialisation wakeup:
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Turn on DMA:.
Checking filesystems:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Mounting filesystems:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Move cache to data device:.
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting eventlircd
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting VDR
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Init networking
Starting DHCP-client
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m

Starting acpid
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting ntp-client
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Setting up storage devices
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting ssh:.
  Listen on IP: 192.168.2.100
^[[1A^[[1000C^[[10D^[[1;32mdone^[[0;39m
Starting vdradmin-am:.
/usr/bin/perl: error while loading shared libraries: libperl.so.5.18: cannot open shared object file: No such file o
^[[1A^[[1000C^[[10D^[[1;31mfailed^[[0;39m



messages:

Nov 30 16:08:09 (MLD) syslog.info syslogd started: BusyBox v1.22.1
Nov 30 16:08:09 (MLD) user.notice kernel: klogd started: BusyBox v1.22.1 (2014-11-30 02:54:42 CET)
Nov 30 16:08:11 (MLD) user.info kernel: SAA716x FF FPGA version 1.10
Nov 30 16:08:11 (MLD) user.info kernel: SAA716x FF loader version 1.03
Nov 30 16:08:11 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Nov 30 16:08:11 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Nov 30 16:08:11 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 0 frontend 0 (STV090x Mult
Nov 30 16:08:11 (MLD) user.info kernel: DVB: registering new adapter (SAA716x dvb adapter)
Nov 30 16:08:11 (MLD) user.info kernel: stv6110x_attach: Attaching STV6110x
Nov 30 16:08:11 (MLD) user.info kernel: SAA716x FF 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Mult
Nov 30 16:08:12 (MLD) user.info kernel: SAA716x FF firmware version 0.5.0
Nov 30 16:08:12 (MLD) user.info kernel: input: TT6400 DVB IR receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00
Nov 30 16:08:22 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link down
Nov 30 16:08:22 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link down
Nov 30 16:08:22 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 30 16:08:23 (MLD) user.info kernel: r8169 0000:01:00.0 eth0: link up
Nov 30 16:08:23 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 30 17:08:32 (MLD) auth.info login[1808]: root login on 'tty2'
Nov 30 17:08:32 (MLD) auth.info login[1807]: root login on 'tty1'
Nov 30 17:08:32 (MLD) auth.info login[1811]: root login on 'tty3'
Nov 30 17:08:32 (MLD) auth.info login[1813]: root login on 'tty4'
--- End code ---

Gruß Gerhard

clausmuus:
Hi Gerhard,

das schaut für mich nach nem Fehler des USB Sticks, von dem Du gebootet hast, aus (am besten noch mal komplett löschen). Ich hab grad auch noch testweise das Image getestet. Bei mir läuft das problemlos.

Claus

gkd-berlin:
Hallo Claus,

nee, am Stick liegt es nicht. Mein letztes ISO vom 2.10. funktioniert auf diesem Stick.

Neuer Download. Vorauswahl ff_hd. Den Rest per Hand hinzugefügt.


--- Code: ---Gewählte Addons
locales
install
dvb
mld-remote
lirc
eventlircd
irkeytable
network
webserver
wakeup
vdr
vdr-plugin-opkg
vdr-plugin-setup
vdr-plugin-dvbhddevice
graphlcd-base
hdparm
mc
samba
ssh
udevil
usb
vdradmin-am
vfat
vdr-plugin-clock
vdr-plugin-devstatus
vdr-plugin-epgsearch
vdr-plugin-extrecmenu
vdr-plugin-femon
vdr-plugin-graphlcd
vdr-plugin-osdpip
vdr-plugin-remote
vdr-plugin-streamdev-server
vdr-plugin-systeminfo
vdr-plugin-tvguide
--- End code ---

Das ISO ist nur 48MB groß. Normalerweise sind die ISO´s um die 81MB groß. Da fehlt wohl die Hälfte.

Gruß Gerhard

clausmuus:
Hi,

da hatte nur der kleine Hinweis gefehlt, das Du nen benutzerdefiniertes ISO getestet hattest.
OK, ich hab den Fehler gefunden. Die lib Pakete hatten nen fehlerhaften Namen, weshalb die bei dem sebst zusammen gestellten ISO gefehlt hatten. Nun geht's wieder.

Claus

Navigation

[0] Message Index

[#] Next page

[*] Previous page