Archiv > Raspberry PI
Test MLD-4 RPI tgz
clausmuus:
Hi,
ich bin ziehmlich sicher, dass Du nen altes Image erwischt hast, bzw. die Installation fehl geschlagen ist und Du ne alte Installation gebootet hast. Vielleicht gibt's ja auch nur Probleme mit der sd-karte, oder Du hast ne individuelle Installation gemacht, und vergessen auszuwählen das die System Partition formartiert werden soll,...
Claus
gkd-berlin:
Hallo,
die vorherige Installation war ein angepasstes Image von heute 11:58.
--- Code: ---start installation
format disk sda1
install system on sda1
write boot files on mmcblk0p1
Installation completed
--- End code ---
Test: MLD-4.0.0-rpi_rpi_2014.06.02-61.tar vom 2.6. 13:37h
Nach 1. Booten von SD-Karte:
--- Code: ---Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for libglib2.0-0:
* libffi5 (>= 3.0.10-1) *
* opkg_install_cmd: Cannot install package libglib2.0-0.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package * rpi-rtc
* opkg_install_cmd: Cannot install package sensors.
* check_data_file_clashes: Package vc wants to install file /etc/ld.so.conf.d/vc.conf
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libGLESv2.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_vc_client.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_core.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvcos.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libOpenVG.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libmmal_util.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libEGL.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libvchiq_arm.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libdebug_sym.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libbcm_host.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /opt/vc/lib/libopenmaxil.so
But that file is already provided by package * libraspberrypi0
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcdbg
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/mmal_vc_diag
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/edidparser
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vcgencmd
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/vchiq_test
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspistill
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/tvservice
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspivid
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/bin/raspiyuv
But that file is already provided by package * libraspberrypi-bin
* check_data_file_clashes: Package vc wants to install file /usr/sbin/vcfiled
But that file is already provided by package * libraspberrypi-bin
* opkg_install_cmd: Cannot install package vc.
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/busses/i2c-bcm2708.ko
But that file is already provided by package * rpi-rtc
* check_data_file_clashes: Package sensors wants to install file /lib/modules/3.14.4.49/kernel/drivers/i2c/i2c-dev.ko
But that file is already provided by package * rpi-rtc
* opkg_install_cmd: Cannot install package vdr-plugin-systeminfo.
--- End code ---
nach 1. reboot
--- Code: ---Sysinit:
cat: can't open '/proc/5508/cmdline': No such file or directory
Starting vdradmin server:
done
setup seems to hang! continue now...
Setting up setup menu:
done
--- End code ---
Mehr stand nicht drin.
nach 2. reboot
--- Code: ---Activate rtc: failed
....
--- End code ---
Das System läuft.
Gruß Gerhard
clausmuus:
OK, ein Teil der Fehlermeldungen kommt, weil Du noch das vc Paket in Deinem individuellem Image drin hast, das eigendlich schon gar nicht mehr hätte auf dem Server sein sollen. Hab's nun entfernt, da das umbenannt wurde.
Claus
gkd-berlin:
Hallo,
inzwischen habe ich die Hardware für mein "WakeUp-Modul" aufgebaut. Hier sind nun die ersten Ergebnisse.
Getestet mit Raspian:
--- Code: ---root@raspberrypi:~# date
Mi 4. Jun 22:04:40 CEST 2014
root@raspberrypi:~# hwclock
Mo 10 Okt 2005 00:12:45 CEST -0.948208 seconds
--- End code ---
Die RTC war vorher mit meiner Testhardware auf 10.10.2005 eingestellt.
--- Code: ---root@raspberrypi:~# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
--- End code ---
--- Code: ---root@raspberrypi:~# hwclock -w
root@raspberrypi:~# date
Mo 10. Okt 00:16:30 CEST 2005
root@raspberrypi:~# hwclock
Mo 10 Okt 2005 00:16:39 CEST -0.411536 seconds
--- End code ---
Uhr abgesteckt:
--- Code: ---root@raspberrypi:~# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
--- End code ---
Daraus folgt: RTC einmal erkannt, immer da. Es wird nicht noch einmal auf die HW zugegriffen.
--- Code: ---root@raspberrypi:~# hwclock
hwclock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Eingabe-/Ausgabefehler
--- End code ---
Hier wird die HW abgefragt.
Getestet mit MLD-4.0.0-rpi_rpi_2014.06.02-61.tar vom 2.6. 13:37h nach Installation auf Festplatte:
In der Sysinit finde ich:
--- Code: ---Activate rtc: failed
--- End code ---
In der Sysinit ist kein Hinweis auf eine ntp-Abfrage.
Das steht in der Messages zu rtc und ds1307:
--- Code: ---....
Jan 1 01:00:06 (none) user.info kernel: [ 2.570127] rtc-test rtc-test.0: rtc core: registered test as rtc0
Jan 1 01:00:06 (none) user.info kernel: [ 2.571242] rtc-test rtc-test.1: rtc core: registered test as rtc1
....
Jan 1 01:00:06 (none) user.info kernel: [ 2.645797] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
....
Jan 1 01:00:16 (none) user.info kernel: [ 16.574202] i2c /dev entries driver
--- End code ---
Einträge zur DS1307 fehlen komplett.
Date und Hwclock:
--- Code: ---MLD> date
Do Jan 1 01:14:45 CET 1970
MLD> hwclock
Do 01 Jan 1970 00:14:51 CET 0.000000 seconds
--- End code ---
In der RTC steht noch immer Datum und Zeit vom Raspian-Test.
i2cdetect bringt:
--- Code: ---MLD> i2cdetect -y 1
Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory
--- End code ---
Für mich sieht es so aus: Es kann auf die RTC nicht zugegriffen werden.
hwclock --set --date=".............." gibt es leider in der MLD nicht.
Gruß Gerhard
clausmuus:
Hi,
es gibt nun neue Images und Pakete. Funktionell sollten die sich nicht von den bisherigen unterscheiden. Ich habe nur alles (mit aktuellen Sourcen) neu bauen lassen.
Selber bin ich noch nicht zum Testen gekommen.
Ein paar VDR Plugins fehlen noch. Die sind noch in Arbeit.
Claus
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version