Archiv > Raspberry PI
Updates
clausmuus:
Hi,
es gibt mal wieder was neues für den RPI. Ich hab auf den neusten Kernel und die aktuelle Firmware umgestellt und bei der Gelegenheit auch gleich den VDR und das rpihddevice Ausgabe Plugin aktualisiert.
Es ist zwar noch nicht alles fertig kompiliert, aber etwa die Hälfte der Addons und die Images sind bereits online.
Bei der Gelegenheit überprüfe ich dann auch gleich, dass sich alle Addons bauen lassen, damit ihr bei bedarf selber RPI Addons bauen könnt.
Claus
clausmuus:
Inzwischen sind alle Addons fertig und online.
Claus
Snorre:
Hallo Claus.
Ich habe gleich heute morgen ein Update durchgeführt.
Seither spinnt das System und ich bekomme massenweise folgende Meldung:
--- Code: ---ERROR: ld.so: object '/usr/lib/libmediaclient.so' from /etc/ld.so.preload cannot be preloaded: ignored.
--- End code ---
Was kann ich tun?
Gruss
Snorre
Update:
Ich habe nun /usr/lib/libmediaclient.so' in /etc/ld.so.preload auskommentiert.
Die Meldungen sind weg, aber es geht trotzdem nichts.
Hier noch verschiedene Ausgaben des System. Ich hoffe das hilft!
--- Code: ---MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.11.158 (nightbuild@armv6) (gcc version 4.6.3 (Debian 4.6.3-14+rpi1) ) #2 PREEMPT Fri Oct 11 15:50:41 CEST 2013
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 98304
[ 0.000000] free_area_init_node: node 0, pgdat c05f04d4, node_mem_map c0698000
[ 0.000000] Normal zone: 768 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=896 bcm2708_fb.fbheight=512 bcm2708.boardrev=0xd bcm2708.serial=0x46b44624 smsc95xx.macaddr=B8:27:EB:B4:46:24 sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p1 initrd=/boot/initrd splash=silent quiet QUIET=1 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 384MB = 384MB total
[ 0.000000] Memory: 379584k/379584k available, 13632k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05981f0 (5697 kB)
[ 0.000000] .init : 0xc0599000 - 0xc05ba19c ( 133 kB)
[ 0.000000] .data : 0xc05bc000 - 0xc05f0c20 ( 212 kB)
[ 0.000000] .bss : 0xc05f0c44 - 0xc0697078 ( 666 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000355] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[ 0.060108] pid_max: default: 32768 minimum: 301
[ 0.060416] Mount-cache hash table entries: 512
[ 0.061118] Initializing cgroup subsys cpuacct
[ 0.061142] Initializing cgroup subsys devices
[ 0.061156] Initializing cgroup subsys freezer
[ 0.061167] Initializing cgroup subsys blkio
[ 0.061238] CPU: Testing write buffer coherency: ok
[ 0.061549] hw perfevents: enabled with v6 PMU driver, 3 counters available
[ 0.061659] Setting up static identity map for 0x433f88 - 0x433fe4
[ 0.071108] NET: Registered protocol family 16
[ 0.075817] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.079785] bcm2708.uart_clock = 0
[ 0.088545] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.088569] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.088581] mailbox: Broadcom VideoCore Mailbox driver
[ 0.088657] bcm2708_vcio: mailbox at f200b880
[ 0.089024] bcm_power: Broadcom power driver
[ 0.089047] bcm_power_open() -> 0
[ 0.089056] bcm_power_request(0, 8)
[ 0.589727] bcm_mailbox_read -> 00000080, 0
[ 0.589746] bcm_power_request -> 0
[ 0.589757] Serial: AMBA PL011 UART driver
[ 0.589884] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.669719] bio: create slab <bio-0> at 0
[ 0.672593] SCSI subsystem initialized
[ 0.673356] usbcore: registered new interface driver usbfs
[ 0.673726] usbcore: registered new interface driver hub
[ 0.674228] usbcore: registered new device driver usb
[ 0.678393] Switching to clocksource stc
[ 0.678606] FS-Cache: Loaded
[ 0.679086] CacheFiles: Loaded
[ 0.709448] NET: Registered protocol family 2
[ 0.710251] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.710686] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.710940] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.710983] TCP: reno registered
[ 0.711001] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.711030] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.711296] NET: Registered protocol family 1
[ 0.711781] RPC: Registered named UNIX socket transport module.
[ 0.711802] RPC: Registered udp transport module.
[ 0.711811] RPC: Registered tcp transport module.
[ 0.711820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.712131] Trying to unpack rootfs image as initramfs...
[ 1.145903] Freeing initrd memory: 3352K
[ 1.147133] bcm2708_dma: DMA manager at f2007000
[ 1.154665] bcm2708_gpio: bcm2708_gpio_probe c05c9d88
[ 1.166104] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 1.221443] audit: initializing netlink socket (disabled)
[ 1.221515] type=2000 audit(1.210:1): initialized
[ 1.389739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.389838] FS-Cache: Netfs 'nfs' registered for caching
[ 1.398890] NFS: Registering the id_resolver key type
[ 1.399003] Key type id_resolver registered
[ 1.399019] Key type id_legacy registered
[ 1.402425] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 1.411649] aufs 3.x-rcN
[ 1.411699] msgmni has been set to 747
[ 1.417099] io scheduler noop registered
[ 1.417125] io scheduler deadline registered
[ 1.417169] io scheduler cfq registered (default)
[ 1.454169] Console: switching to colour frame buffer device 112x32
[ 1.793215] brd: module loaded
[ 1.959694] loop: module loaded
[ 1.978652] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[ 2.011110] usbcore: registered new interface driver smsc95xx
[ 2.020751] usbcore: registered new interface driver cdc_ncm
[ 2.020783] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.245340] Core Release: 2.80a
[ 2.245368] Setting default values for core params
[ 2.245410] Finished setting default values for core params
[ 2.450498] Using Buffer DMA mode
[ 2.450521] Periodic Transfer Interrupt Enhancement - disabled
[ 2.450530] Multiprocessor Interrupt Enhancement - disabled
[ 2.450540] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.450555] Dedicated Tx FIFOs mode
[ 2.450737] dwc_otg: Microframe scheduler enabled
[ 2.450786] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.450836] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.450890] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.450959] Init: Port Power? op_state=1
[ 2.450968] Init: Power Port (0)
[ 2.451077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.451097] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.451114] usb usb1: Product: DWC OTG Controller
[ 2.451130] usb usb1: Manufacturer: Linux 3.6.11.158 dwc_otg_hcd
[ 2.451144] usb usb1: SerialNumber: bcm2708_usb
[ 2.459076] hub 1-0:1.0: USB hub found
[ 2.459140] hub 1-0:1.0: 1 port detected
[ 2.466545] dwc_otg: FIQ enabled
[ 2.466574] dwc_otg: NAK holdoff enabled
[ 2.466609] Module dwc_common_port init
[ 2.468592] Initializing USB Mass Storage driver...
[ 2.474851] usbcore: registered new interface driver usb-storage
[ 2.474882] USB Mass Storage support registered.
[ 2.481250] usbcore: registered new interface driver libusual
[ 2.490810] mousedev: PS/2 mouse device common for all mice
[ 2.516400] rtc-test rtc-test.0: rtc core: registered test as rtc0
[ 2.529081] rtc-test rtc-test.1: rtc core: registered test as rtc1
[ 2.551502] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[ 2.551651] bcm2835-cpufreq: switching to governor powersave
[ 2.551665] bcm2835-cpufreq: switching to governor powersave
[ 2.551692] cpuidle: using governor ladder
[ 2.551703] cpuidle: using governor menu
[ 2.563328] sdhci: Secure Digital Host Controller Interface driver
[ 2.563355] sdhci: Copyright(c) Pierre Ossman
[ 2.563488] sdhci: Enable low-latency mode
[ 2.575076] Registered led device: mmc0::
[ 2.618581] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 2.618650] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 2.624917] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.636605] Registered led device: led0
[ 2.658720] Indeed it is in host mode hprt0 = 00021501
[ 2.686265] usbcore: registered new interface driver usbhid
[ 2.686293] usbhid: USB HID core driver
[ 2.686791] TCP: cubic registered
[ 2.686806] Initializing XFRM netlink socket
[ 2.686858] NET: Registered protocol family 17
[ 2.687016] Key type dns_resolver registered
[ 2.687338] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.713269] mmc0: read SD Status register (SSR) after 2 attempts
[ 2.717647] registered taskstats version 1
[ 2.720403] mmc0: new high speed SDHC card at address e624
[ 2.723168] rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:02 UTC (2)
[ 2.723888] Freeing init memory: 132K
[ 2.755249] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 2.760603] mmcblk0: p1
[ 3.018776] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.018940] Indeed it is in host mode hprt0 = 00001101
[ 3.268935] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 3.268966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.280608] hub 1-1:1.0: USB hub found
[ 3.280791] hub 1-1:1.0: 3 ports detected
[ 3.558789] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.659172] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.659203] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.677840] smsc95xx v1.0.4
[ 3.757123] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b4:46:24
[ 3.848827] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 3.950983] usb 1-1.2: New USB device found, idVendor=7392, idProduct=7811
[ 3.951014] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.951031] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 3.951046] usb 1-1.2: Manufacturer: Realtek
[ 3.951060] usb 1-1.2: SerialNumber: 00e04c000001
[ 4.048859] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 4.149356] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101
[ 4.149387] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.149403] usb 1-1.3: Product: USB 2.0 Hub
[ 4.167643] hub 1-1.3:1.0: USB hub found
[ 4.167874] hub 1-1.3:1.0: 4 ports detected
[ 4.448783] usb 1-1.3.1: new high-speed USB device number 6 using dwc_otg
[ 4.549395] usb 1-1.3.1: New USB device found, idVendor=1a40, idProduct=0101
[ 4.549410] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.549419] usb 1-1.3.1: Product: USB 2.0 Hub
[ 4.559967] hub 1-1.3.1:1.0: USB hub found
[ 4.560187] hub 1-1.3.1:1.0: 4 ports detected
[ 4.838838] usb 1-1.3.1.1: new high-speed USB device number 7 using dwc_otg
[ 4.939322] usb 1-1.3.1.1: New USB device found, idVendor=04b4, idProduct=2830
[ 4.939355] usb 1-1.3.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.049174] usb 1-1.3.1.4: new low-speed USB device number 8 using dwc_otg
[ 5.177521] usb 1-1.3.1.4: New USB device found, idVendor=0a81, idProduct=0101
[ 5.177552] usb 1-1.3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.177568] usb 1-1.3.1.4: Product: USB Keyboard
[ 5.177583] usb 1-1.3.1.4: Manufacturer: CHESEN
[ 5.208200] input: CHESEN USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.4/1-1.3.1.4:1.0/input/input0
[ 5.223952] hid-generic 0003:0A81:0101.0001: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-bcm2708_usb-1.3.1.4/input0
[ 5.259234] input: CHESEN USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1.4/1-1.3.1.4:1.1/input/input1
[ 5.276638] hid-generic 0003:0A81:0101.0002: input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-bcm2708_usb-1.3.1.4/input1
[ 9.231479] aufs test_add:264:mount[816]: uid/gid/perm /mnt/system 0/0/0755, 0/0/01777
[ 9.375823] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
[ 9.389365] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.477526] aufs test_add:264:mount[826]: uid/gid/perm /mnt/rootimg 1002/1002/0755, 0/0/01777
[ 10.099489] aufs test_add:264:mount[886]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 1002/1002/0755
[ 10.237998] aufs test_add:264:mount[900]: uid/gid/perm /var/spool/apm.mnt/ntp-client 0/0/0777, 1002/1002/0755
[ 10.372960] aufs test_add:264:mount[913]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 1002/1002/0755
[ 10.511060] aufs test_add:264:mount[928]: uid/gid/perm /var/spool/apm.mnt/lib-av 0/0/0777, 1002/1002/0755
[ 10.648056] aufs test_add:264:mount[942]: uid/gid/perm /var/spool/apm.mnt/dvb-sundtek 0/0/0777, 1002/1002/0755
[ 10.787398] aufs test_add:264:mount[956]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 1002/1002/0755
[ 10.924403] aufs test_add:264:mount[970]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 1002/1002/0755
[ 11.119115] aufs test_add:264:mount[987]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 1002/1002/0755
[ 11.298797] aufs test_add:264:mount[1003]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 1002/1002/0755
[ 11.512792] aufs test_add:264:mount[1022]: uid/gid/perm /var/spool/apm.mnt/network-wireless 0/0/0777, 1002/1002/0755
[ 11.714719] aufs test_add:264:mount[1040]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 1002/1002/0755
[ 11.913024] aufs test_add:264:mount[1058]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 1002/1002/0755
[ 12.113589] aufs test_add:264:mount[1075]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 1002/1002/0755
[ 12.626775] aufs test_add:264:mount[1095]: uid/gid/perm /var/spool/apm.mnt/vc 0/0/0777, 1002/1002/0755
[ 13.061476] aufs test_add:264:mount[1111]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 1002/1002/0755
[ 13.500745] aufs test_add:264:mount[1131]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 1002/1002/0755
[ 13.939026] aufs test_add:264:mount[1148]: uid/gid/perm /var/spool/apm.mnt/femon 0/0/0777, 1002/1002/0755
[ 14.383490] aufs test_add:264:mount[1166]: uid/gid/perm /var/spool/apm.mnt/osdteletext 0/0/0777, 1002/1002/0755
[ 14.834092] aufs test_add:264:mount[1186]: uid/gid/perm /var/spool/apm.mnt/rpihddevice 0/0/0777, 1002/1002/0755
[ 15.286373] aufs test_add:264:mount[1204]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 1002/1002/0755
[ 15.742499] aufs test_add:264:mount[1222]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 1002/1002/0755
[ 31.257323] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
MLD> lsmod
Module Size Used by Not tainted
MLD> apm cc
MLD> apm update-all
apm: no updates available
MLD> route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default fritz.box 0.0.0.0 UG 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
MLD> ifconfig
eth0 Link encap:Ethernet HWaddr B8:27:EB:B4:46:24
inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:606 errors:0 dropped:0 overruns:0 frame:0
TX packets:518 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:123069 (120.1 KiB) TX bytes:98445 (96.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2014 (1.9 KiB) TX bytes:2014 (1.9 KiB)
MLD>
--- End code ---
Eigentlich müssten die Module für den Lirc-Empfänger, den WLAN-Adapter und die USB-Opera geladen sein.
Vorab vielen Dank.
clausmuus:
Hi,
leider gibt's beim RPI wohl noch Probleme beim Kernel und initramfs Update. Am besten Du lädst dir das "base" image herunter und kopierst die beiden Datein boot/kernel und boot/initrd auf deine SD Karte nach boot/
Claus
steiniplatte:
--- Quote from: clausmuus on November 22, 2013, 18:46:58 ---Hi,
leider gibt's beim RPI wohl noch Probleme beim Kernel und initramfs Update. Am besten Du lädst dir das "base" image herunter und kopierst die beiden Datein boot/kernel und boot/initrd auf deine SD Karte nach boot/
Claus
--- End quote ---
Hi Claus
Hatte letzte Woche ein Update All mit apm abgesetzt und danach unresolved Symbols in der dvb-usb Lib, musste dann auf die alte Version zurück. Könnte das auch mit dem hier geschilderten Problem zusammenhängen?
Wenn ich das richtig verstehe, sollte ich nach einem Update die Himbeere runterfahren, base image laden und kernel sowie initrd auf der SD-Karte durch die Version aus dem aktuellen base-Image ersetzen.
Viele Grüße
steiniplatte
Navigation
[0] Message Index
[#] Next page
Go to full version