Archiv > Development

Skystar S2 Unter Mld?

<< < (10/15) > >>

oelhahn:
Die Ausgabe von dmesg:

 

oelhahn:
Sinnigerweise zeigt vdr-setup-dvb 3 devices an, das verstehe, wer will.

EDIT:
Bei "restart vdr" schmeisst /var/log/messages sporadisch
"Sep 21 10:59:08 (MLD) user.info kernel: vdr[6763]: segfault at b7083944 ip b7083944 sp b5f261d0 error 4 in ISO8859-15.so[b708a000+2000]"
oder auch
"Sep 21 13:03:33 (MLD) user.err vdr: [7848] ERROR: streamdev-server: couldn't send data: Bad file descriptor
Sep 21 13:04:16 (MLD) user.err vdr: [7864] ERROR: streamdev-server: couldn't send data: Bad file descriptor"

raus, ebenso beim ersten Kanalwechsel.

In der /var/log/syslog steht nach dem Systemstart

Segmentation fault
VDR exits at Sa Sep 21 12:57:19 CEST 2013
df: /dev/pts: No such file or directory
df: /dev/pts: No such file or directory
modprobe: rmmod: Bad address
Segmentation fault

 

oelhahn:
Reicht es eigentlich, jeweils die 3.0.3 upzudaten, wenn was neues dazu kommt,
oder besser jedesmal neu installieren?

Neuinstallieren geht ja im Grunde recht flott (gottseidank  :)) ),
updaten ist einfacher...  :rolleyes:  

oelhahn:
Die MLD-3.0.1.1_server-2013.09.21_56 ignoriert die SkyStar S2 völlig...
 :unsure:

--- Code: ---/var/log/messages

b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Sep 22 08:55:54 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 22 08:55:54 (none) user.info kernel: flexcop-pci: card revision 2
Sep 22 08:55:54 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 22 08:55:54 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:49:4a
Sep 22 08:55:54 (none) user.err kernel: CX24123: wrong demod revision: 13
Sep 22 08:55:54 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Sep 22 08:55:54 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Sep 22 08:55:54 (none) user.err kernel: nxt200x: Unknown/Unsupported NXT chip: f4e1fe1f
Sep 22 08:55:54 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Sep 22 08:55:54 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Sep 22 08:55:54 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Sep 22 08:55:54 (none) user.debug kernel: mt312_read: ret == -121
Sep 22 08:55:54 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Sep 22 08:55:54 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 22 08:55:54 (none) user.info kernel: flexcop-pci: card revision 2
Sep 22 08:55:54 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 22 08:55:54 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:87:58
Sep 22 08:55:54 (none) user.err kernel: CX24123: wrong demod revision: 13
Sep 22 08:55:54 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Sep 22 08:55:54 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Sep 22 08:55:54 (none) user.err kernel: nxt200x: Unknown/Unsupported NXT chip: f4e1fe1f
Sep 22 08:55:54 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Sep 22 08:55:54 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Sep 22 08:55:54 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Sep 22 08:55:54 (none) user.debug kernel: mt312_read: ret == -121
Sep 22 08:55:54 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter

--- End code ---

Da fehlt wohl das Modul cx24120...  ;( 

oelhahn:
Die MLD-3.0.1.1_server-2013.09.24_56.iso will, wie schon die Version davor, mit der Skystar nichts zu tun haben:

--- Code: ---Sep 26 16:28:35 (none) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Sep 26 16:28:35 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 26 16:28:35 (none) user.info kernel: flexcop-pci: card revision 2
Sep 26 16:28:35 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 26 16:28:35 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:49:4a
Sep 26 16:28:35 (none) user.err kernel: CX24123: wrong demod revision: df
Sep 26 16:28:36 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Sep 26 16:28:36 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Sep 26 16:28:36 (none) user.err kernel: nxt200x: Unknown/Unsupported NXT chip: f4e15e1f
Sep 26 16:28:36 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Sep 26 16:28:36 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Sep 26 16:28:36 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Sep 26 16:28:36 (none) user.debug kernel: mt312_read: ret == -121
Sep 26 16:28:36 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
Sep 26 16:28:36 (none) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 26 16:28:36 (none) user.info kernel: flexcop-pci: card revision 2
Sep 26 16:28:36 (none) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 26 16:28:36 (none) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:87:58
Sep 26 16:28:36 (none) user.err kernel: CX24123: wrong demod revision: a1
Sep 26 16:28:36 (none) user.warn kernel: mt352_read_register: readreg error (reg=127, ret==-121)
Sep 26 16:28:36 (none) user.warn kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Sep 26 16:28:36 (none) user.err kernel: nxt200x: Unknown/Unsupported NXT chip: f4e15e1f
Sep 26 16:28:36 (none) user.warn kernel: lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Sep 26 16:28:36 (none) user.err kernel: DVB: Unable to find symbol bcm3510_attach()
Sep 26 16:28:36 (none) user.warn kernel: stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Sep 26 16:28:36 (none) user.debug kernel: mt312_read: ret == -121
Sep 26 16:28:36 (none) user.err kernel: b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter

--- End code ---

 :( :(

Navigation

[0] Message Index

[#] Next page

[*] Previous page