Archiv > Development

Testbericht Mld 3.0.3 Mit Tt-s2-6400

<< < (10/34) > >>

Christian:

--- Quote --- Hallo,
--- Quote ---MLD> modprobe -r asus_atk0110
MLD> modprobe -r coretemp
MLD> lsmod
Module                  Size  Used by    Tainted: G
isl6423                 1540  2
stv6110x                3104  2
stv090x                38637  2
saa716x_ff             19552  0
saa716x_core         42189 23 saa716x_ff
dvb_core               60265  2 saa716x_ff,saa716x_core
button                  3477  0
processor              22891  0
r8169                  39572  0
hwmon_vid               1708  0
fuse                   48185  0
MLD> modprobe w83627ehf
modprobe: can't load module w83627ehf (kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
--- End quote ---
Gruß Gerhard
--- End quote ---
Probiere einfach mal :

modprobe w83627ehf force_id=0x8860

gkd-berlin:
Hallo Christian,
hier ist das Ergebnis:
--- Quote ---MLD> modprobe -r coretemp
MLD> modprobe -r asus_atk0110
MLD> modprobe w83627ehf force_id=0x8860
modprobe: can't load module w83627ehf (kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
MLD> lsmod
Module                  Size  Used by    Tainted: G
hwmon                    897  0
isl6423                  1540  2
stv6110x                3104  2
stv090x                38637  2
saa716x_ff             19552  0
saa716x_core         42189 24 saa716x_ff
dvb_core               60265  2 saa716x_ff,saa716x_core
button                  3477  0
processor              22891  0
r8169                  39572  0
hwmon_vid               1708  0
fuse                   48185  0
MLD>
--- End quote ---
Gruß Gerhard
 

gkd-berlin:
Hallo,
Test: MLD-3.0.3_ff-hd-2013.07.20-56.iso vom 21.7.
Nichts Neues.
-----------------------------------------------------------------
--- Quote ---MLD> modprobe -r coretemp
MLD> modprobe -r asus_atk0110
MLD> modprobe w83627ehf
modprobe: can't load module w83627ehf (kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
MLD> modprobe -r w83627ehf
MLD> modprobe w83627ehf
modprobe: can't load module w83627ehf (kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
MLD> lsmod
Module                  Size  Used by    Tainted: G
hwmon                    897  0
hwmon_vid               1708  0
isl6423                 1540  2
stv6110x                3104  2
stv090x                38637  2
saa716x_ff             19552  0
saa716x_core           42189 22 saa716x_ff
dvb_core               60265  2 saa716x_ff,saa716x_core
button                  3477  0
processor              22891  0
r8169                  39572  0
fuse                   48185  0
MLD>
--- End quote ---
Gruß Gerhard

Christian:
Das habe ich gefunden:


At start the system swears
... conflicts with ACPI region HWRE [0x290-0x299]
But lm_sensors successfully starts and sensors shows a state of all sensors.
Thanks.

Has found still here
http://bugzilla.kernel.org/show_bug.cgi?id=13571

"From now on you can add acpi_enforce_resources=lax to the kernel command line
to restore old behaviour."

And now I am confused, let and further swears at start or I should add an
option acpi_enforce_resources=lax.

-----------
Boot parameter acpi_enforce_resources is to restore the old (and dangerous)
behavior where the kernel did not prevent resource conflicts. It is discouraged
to use it, especially in your case were the asus_atk0110 driver works just
fine.

BTW, if you no longer attempt to load the w83627ehf driver, the error message
should no longer show at boot time.

I'm leaving this bug opened as a reminder that sensors-detect needs to be
somehow made aware of ACPI resource conflicts.

-------

Du kannst versuchen mit dem Kernelparameter : acpi_enforce_resources=lax
dein System zu starten oder das neuere Modul asus_atk0110 zu nehmen. Wenn du nicht auf vbat verzichten möchtest kannst du den Parameter ja einmal Testen.

 

gkd-berlin:
Hallo Christian,

???, wie mache ich das mit dem Kernelparameter?

Gruß Gerhard

Navigation

[0] Message Index

[#] Next page

[*] Previous page