Archiv > Development
Mld-3.0.2
MarMic:
jop denke erstmal manuel schritt für schritt festhalten wie es geht (also getestet)
und dann schreibt claus sicher ne routine für uns (ich mag makefiles und inits sowas von nicht :-) ... das ist immer nen try n error bei mir
@wino, n bissl angst habe ich das sich nun so sachen wie imon und lirc_imon(staging) beissen? was denkst du darüber?
MegaX:
--- Quote --- Der Anfang ist damit gemacht. Installiere bitte usbutils.
Die Ausgabe von lsusb -v > lsusb.txt und die Ausgabe von cat /proc/bus/input/devies würde mich interessieren. Als Fleißaufgabe könntest Du bitte im dvb-remote Addon unter src/dvb/linux/drivers/media/rc/keymaps die rc-imon-pad.c anpassen und mir zukommen lassen.
Dabei gehst Du wie folgt vor. Deine bisherige lircd.conf mit der rc-imon-pad.c unter Berücksichtigung der gemeinsamen remote.conf abgleichen. Die Tastenbelegung in der rc-imon-pad.c muss nach der Bearbeitung mit denen in der remote.conf übereinstimmen. Die Tasten, die Du für User1-9 vorgesehen hast, müssen in der rc-imon-pad.c danach KEY_PROG1-9 benannt sein.
Kommst mit dem geschrieben nicht klar, kannst Du mir Deine lircd.conf nochmal zukommen lassen. In dieser sollen die Tasten kommentiert sein, die Du für die User-Tasten vorgesehen hast.
MfG
wino
--- End quote ---
Teste das ganze morgen wenns ok ist. Komm heut nimmer an den HTPC.
MegaX
wino:
--- Quote ---Teste das ganze morgen wenns ok ist. Komm heut nimmer an den HTPC.MegaX
--- End quote ---
Klar, Rom wurde auch nicht an einem Tag gebaut. Du bist im Moment der einzige der überhaupt etwas Testet. Außer von MarMic habe ich noch von keinem anderen eine Rückmeldung bekommen.
MfG
wino
MegaX:
--- Quote ---Er zählt beim starten in der /etc/udev/rules.d/70-persistent-net.rules bei jedem start meine Netzwerkkarte hoch.
Start 1: eth0
Start 2: eth1
Start 3: eth2
usw.
--- End quote ---
Also der Fehler besteht hier auf meinem HTPC und Arbeits-PC weiterhin, trotz komplett neuer Develumgebung(auch 12.04.1 neu inst.).
Das Problem tritt aber erst seit Umstellung auf Kernel 3.5.4 auf, vorher gings.
Mal das Log dazu:
--- Code: ---/var/log/messages
Sep 25 13:33:57 (none) syslog.info syslogd started: BusyBox v1.20.2
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[409]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[423]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[438]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[453]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[471]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[489]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[508]: uid/gid/perm /var/spool/apm.mnt/xorg 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[528]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[548]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Sep 25 13:33:57 (none) user.warn kernel: aufs test_add:261:mount[570]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[594]: uid/gid/perm /var/spool/apm.mnt/lib-av 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[617]: uid/gid/perm /var/spool/apm.mnt/softhddevice 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[643]: uid/gid/perm /var/spool/apm.mnt/xorg-nvidia 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[669]: uid/gid/perm /var/spool/apm.mnt/lib-pango 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[695]: uid/gid/perm /var/spool/apm.mnt/eventlircd 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[723]: uid/gid/perm /var/spool/apm.mnt/evtest 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[747]: uid/gid/perm /var/spool/apm.mnt/irkeytable 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[782]: uid/gid/perm /var/spool/apm.mnt/dvb-remote 0/0/0777, 0/0/0775
Sep 25 13:33:58 (none) user.warn kernel: aufs test_add:261:mount[813]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Sep 25 13:34:00 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
Sep 25 13:34:00 (none) user.info kernel: XFS (sda2): Ending clean mount
Sep 25 13:34:02 (none) user.info kernel: Linux agpgart interface v0.103
Sep 25 13:34:03 (none) user.warn kernel: nvidia: module license 'NVIDIA' taints kernel.
Sep 25 13:34:03 (none) user.warn kernel: Disabling lock debugging due to kernel taint
Sep 25 13:34:03 (none) user.info kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Sep 25 13:34:03 (none) user.warn kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 304.51 Tue Sep 18 17:36:24 PDT 2012
Sep 25 13:34:03 (none) user.info kernel: hda_intel: Disabling MSI
Sep 25 13:34:04 (none) user.warn kernel: NVRM: GPU at 0000:01:00: GPU-4ef45f81-1845-f519-6266-c3e9324f7792
Sep 25 13:34:04 (none) user.warn kernel: NVRM: Your system is not currently configured to drive a VGA console
Sep 25 13:34:04 (none) user.warn kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Sep 25 13:34:04 (none) user.warn kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
Sep 25 13:34:04 (none) user.warn kernel: NVRM: drivers including, but not limited to, vesafb, may result in
Sep 25 13:34:04 (none) user.warn kernel: NVRM: corruption and stability problems, and is not supported.
Sep 25 13:34:06 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Sep 25 13:34:06 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Sep 25 13:34:06 (none) user.err kernel: enough quality for its usage in production.
Sep 25 13:34:06 (none) user.err kernel: Use it with care.
Sep 25 13:34:06 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Sep 25 13:34:06 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Sep 25 13:34:06 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Sep 25 13:34:06 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Sep 25 13:34:06 (none) user.info kernel: Linux video capture interface: v2.00
Sep 25 13:34:06 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Sep 25 13:34:06 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Sep 25 13:34:06 (none) user.err kernel: enough quality for its usage in production.
Sep 25 13:34:06 (none) user.err kernel: Use it with care.
Sep 25 13:34:06 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Sep 25 13:34:06 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Sep 25 13:34:06 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Sep 25 13:34:06 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Sep 25 13:34:06 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Sep 25 13:34:06 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Sep 25 13:34:06 (none) user.err kernel: enough quality for its usage in production.
Sep 25 13:34:06 (none) user.err kernel: Use it with care.
Sep 25 13:34:06 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Sep 25 13:34:06 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Sep 25 13:34:06 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Sep 25 13:34:06 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Sep 25 13:34:06 (none) user.info kernel: cx23885 driver version 0.0.3 loaded
Sep 25 13:34:06 (none) user.info kernel: CORE cx23885[0]: subsystem: 4254:0952, board: DVBSKY S952 [card=38,autodetected]
Sep 25 13:34:06 (none) user.info kernel: cx25840 5-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
Sep 25 13:34:07 (none) user.info kernel: cx25840 5-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Sep 25 13:34:07 (none) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Sep 25 13:34:07 (none) user.info kernel: cx23885[0]: cx23885 based dvb card
Sep 25 13:34:07 (none) user.info kernel: DS3000 chip version: d0 attached.
Sep 25 13:34:07 (none) user.info kernel: TS202x chip version[1]: c0 attached.
Sep 25 13:34:07 (none) user.info kernel: TS202x chip version[2]: c3 attached.
Sep 25 13:34:07 (none) user.info kernel: m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
Sep 25 13:34:07 (none) user.info kernel: m88ds3103_load_firmware: Waiting for firmware upload(2)...
Sep 25 13:34:08 (none) user.info kernel: DVB: registering new adapter (cx23885[0])
Sep 25 13:34:08 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)...
Sep 25 13:34:08 (none) user.info kernel: cx23885_dvb_register() allocating 1 frontend(s)
Sep 25 13:34:08 (none) user.info kernel: cx23885[0]: cx23885 based dvb card
Sep 25 13:34:08 (none) user.info kernel: DS3000 chip version: d0 attached.
Sep 25 13:34:08 (none) user.info kernel: TS202x chip version[1]: c0 attached.
Sep 25 13:34:08 (none) user.info kernel: TS202x chip version[2]: c3 attached.
Sep 25 13:34:08 (none) user.info kernel: m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
Sep 25 13:34:08 (none) user.info kernel: m88ds3103_load_firmware: Waiting for firmware upload(2)...
Sep 25 13:34:09 (none) user.info kernel: DVB: registering new adapter (cx23885[0])
Sep 25 13:34:09 (none) user.warn kernel: DVB: registering adapter 1 frontend 0 (Montage DS3103/TS2022)...
Sep 25 13:34:09 (none) user.info kernel: cx23885_dev_checkrevision() Hardware revision = 0xa5
Sep 25 13:34:09 (none) user.info kernel: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfe800000
Sep 25 13:34:09 (none) user.info kernel: Registered IR keymap rc-dvbsky
Sep 25 13:34:09 (none) user.info kernel: input: cx23885 IR (DVBSKY S952) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0/input2
Sep 25 13:34:09 (none) user.info kernel: rc0: cx23885 IR (DVBSKY S952) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0
Sep 25 13:34:09 (none) user.info kernel: IR NEC protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: IR RC5(x) protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: IR RC6 protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: IR JVC protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: IR Sony protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: IR SANYO protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input3
Sep 25 13:34:09 (none) user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
Sep 25 13:34:09 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 252
Sep 25 13:34:09 (none) user.info kernel: rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
Sep 25 13:34:09 (none) user.info kernel: IR LIRC bridge handler initialized
Sep 25 13:34:09 (none) user.info kernel: input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4
Sep 25 13:34:09 (none) user.info kernel: Registered IR keymap rc-imon-pad
Sep 25 13:34:09 (none) user.info kernel: input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/rc/rc1/input5
Sep 25 13:34:09 (none) user.info kernel: rc1: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/rc/rc1
Sep 25 13:34:09 (none) user.info kernel: imon 5-2:1.0: iMON device (15c2:0038, intf0) on usb initialized
Sep 25 13:34:09 (none) user.info kernel: imon 5-2:1.1: iMON device (15c2:0038, intf1) on usb initialized
Sep 25 13:34:09 (none) user.info kernel: usbcore: registered new interface driver imon
Sep 25 13:34:12 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 25 13:34:12 (none) user.info kernel: r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8d36000, 40:61:86:87:9d:83, XID 081000c0 IRQ 17
Sep 25 13:34:12 (none) user.info kernel: r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 25 13:34:25 (none) daemon.info init: reloading /etc/inittab
Sep 25 13:34:25 (none) daemon.info init: starting pid 3488, tty '/dev/tty1': '/bin/login -f root'
Sep 25 13:34:25 (none) user.info kernel: bootsplash: status on console 0 changed to on
Sep 25 15:34:25 (none) auth.info login[3488]: root login on 'tty1'
Sep 25 13:34:25 (none) daemon.info init: starting pid 3489, tty '/dev/tty2': '/bin/login -f root'
Sep 25 15:34:25 (none) auth.info login[3489]: root login on 'tty2'
Sep 25 13:34:25 (none) daemon.info init: starting pid 3490, tty '/dev/tty3': '/bin/login -f root'
Sep 25 15:34:25 (none) auth.info login[3490]: root login on 'tty3'
Sep 25 13:34:25 (none) daemon.info init: starting pid 3493, tty '/dev/tty4': '/bin/login -f root'
Sep 25 15:34:25 (none) auth.info login[3493]: root login on 'tty4'
Sep 25 15:34:56 (none) user.err vdr: video/vdpau: can't block queue: The display was pre-empted, or a fatal error occurred.
Sep 25 15:34:56 (none) user.err vdr: video/vdpau: can't render mixer: An invalid handle value was provided.
Sep 25 15:34:56 (none) user.err vdr: video/vdpau: can't queue display: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video decoder: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video mixer: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy video surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy output surface: An invalid handle value was provided.
Sep 25 15:35:01 (none) user.err vdr: video/vdpau: can't destroy grab render output surface: An invalid handle value was provided.
Sep 25 13:35:09 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 25 13:35:09 (none) user.info kernel: r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8064000, 40:61:86:87:9d:83, XID 081000c0 IRQ 17
Sep 25 13:35:09 (none) user.info kernel: r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 25 13:35:12 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 25 13:35:12 (none) user.info kernel: r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf807e000, 40:61:86:87:9d:83, XID 081000c0 IRQ 17
Sep 25 13:35:12 (none) user.info kernel: r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 25 13:35:18 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 25 13:35:18 (none) user.info kernel: r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8522000, 40:61:86:87:9d:83, XID 081000c0 IRQ 17
Sep 25 13:35:18 (none) user.info kernel: r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 25 13:35:54 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 25 13:35:54 (none) user.info kernel: r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xf8596000, 40:61:86:87:9d:83, XID 081000c0 IRQ 17
Sep 25 13:35:54 (none) user.info kernel: r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 25 13:35:54 (none) user.info kernel: r8169 0000:03:00.0: eth0: link down
Sep 25 13:35:54 (none) user.info kernel: r8169 0000:03:00.0: eth0: link down
Sep 25 13:35:54 (none) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 25 13:35:57 (none) user.info kernel: r8169 0000:03:00.0: eth0: link up
Sep 25 13:35:57 (none) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--- End code ---
MegaX
MarMic:
kannste das in der vm nachstellen?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version