Archiv > Development
Aktuelles Iso Funktioniert Nicht?
P3f:
Hi,
eigentlich wollte ich mal eben schnell wieder meine MLD neu aufsetzen, um dann noch intensiv die Remotes prüfen. Aber...
ich habe mir heute ein aktuelles ISO erstellt und davon gebootet. Dann wollte ich das mit der individuellen Installation im Webif auf der Festplatte installieren. Es kommt aber auch nach ca 10 Minuten keine Rückmeldung und die DVD/Festplatte läuft immer so alle 2 Minuten kurz an.
Dann habe ich im /var/log/messages das unten stehende gefunden, und befürchtet das meine Festplatte einen Defekt hat. Also auch mit einer Werksneuen Festplatte (die hatte ich noch rumliegen weil upgraden wollte) kommt es zur selben Meldung.
--- Code: ---Jan 5 11:21:12 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:21:12 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 e8 1a 00 00 14 00
Jan 5 11:21:12 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:a0/00:00:00:00:00/a0 tag 0 dma 40960 in
Jan 5 11:21:12 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:21:12 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:21:12 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:21:12 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:21:12 (none) user.info kernel: ata3.00: configured for UDMA/66
Jan 5 11:21:12 (none) user.info kernel: ata3: EH complete
Jan 5 11:21:22 (none) user.err kernel: INFO: rcu_sched_state detected stall on CPU 0 (t=240030 jiffies)
Jan 5 11:21:43 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:21:43 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:21:43 (none) user.warn kernel: ata3.00: limiting speed to UDMA/33:PIO4
Jan 5 11:21:43 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:21:43 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 e8 1a 00 00 14 00
Jan 5 11:21:43 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:a0/00:00:00:00:00/a0 tag 0 dma 40960 in
Jan 5 11:21:43 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:21:43 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:21:43 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:21:43 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:21:43 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:21:43 (none) user.info kernel: ata3: EH complete
Jan 5 11:22:17 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:22:17 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:22:17 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:22:17 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 60 00 00 00 08 00
Jan 5 11:22:17 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:40/00:00:00:00:00/a0 tag 0 dma 16384 in
Jan 5 11:22:17 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:22:17 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:22:17 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:22:17 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:22:17 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:22:17 (none) user.info kernel: ata3: EH complete
Jan 5 11:22:51 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:22:51 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:22:51 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:22:51 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 73 fc 00 00 02 00
Jan 5 11:22:51 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
Jan 5 11:22:51 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:22:51 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:22:51 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:22:51 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:22:51 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:22:51 (none) user.info kernel: ata3: EH complete
Jan 5 11:23:24 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:23:24 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:23:24 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:23:24 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 8b 46 00 00 08 00
Jan 5 11:23:24 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:40/00:00:00:00:00/a0 tag 0 dma 16384 in
Jan 5 11:23:24 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:23:24 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:23:24 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:23:24 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:23:24 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:23:24 (none) user.info kernel: ata3: EH complete
Jan 5 11:23:27 (none) user.info kernel: bootsplash: status on console 0 changed to on
Jan 5 12:23:27 (none) auth.info login[18285]: root login on 'tty1'
Jan 5 12:23:27 (none) auth.info login[18290]: root login on 'tty2'
Jan 5 12:23:27 (none) auth.info login[18299]: root login on 'tty3'
Jan 5 12:23:27 (none) auth.info login[18304]: root login on 'tty4'
Jan 5 11:23:57 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:23:57 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:23:57 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:23:57 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 1d e0 00 00 08 00
Jan 5 11:23:57 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:40/00:00:00:00:00/a0 tag 0 dma 16384 in
Jan 5 11:23:57 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:23:57 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:23:57 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:23:57 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:23:57 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:23:57 (none) user.info kernel: ata3: EH complete
Jan 5 11:24:22 (none) user.err kernel: INFO: rcu_sched_state detected stall on CPU 0 (t=420060 jiffies)
Jan 5 11:24:28 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:24:28 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:24:28 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:24:28 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 1d e0 00 00 08 00
Jan 5 11:24:28 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:40/00:00:00:00:00/a0 tag 0 dma 16384 in
Jan 5 11:24:28 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:24:28 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:24:28 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:24:28 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:24:28 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:24:28 (none) user.info kernel: ata3: EH complete
Jan 5 11:25:04 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:25:04 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:25:04 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:25:04 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 1e 18 00 00 40 00
Jan 5 11:25:04 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 0 dma 131072 in
Jan 5 11:25:04 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:25:04 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:25:04 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:25:04 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:25:04 (none) user.info kernel: ata3.00: configured for UDMA/33
Jan 5 11:25:04 (none) user.info kernel: ata3: EH complete
Jan 5 11:25:37 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:25:37 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:25:37 (none) user.warn kernel: ata3.00: limiting speed to PIO4
Jan 5 11:25:37 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:25:37 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 0c 30 00 00 30 00
Jan 5 11:25:37 (none) user.err kernel: ata3.00: cmd a0/01:00:00:00:fc/00:00:00:00:00/a0 tag 0 dma 98304 in
Jan 5 11:25:37 (none) user.err kernel: res 40/00:02:00:22:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:25:37 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:25:37 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:25:37 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:25:37 (none) user.info kernel: ata3.00: configured for PIO4
Jan 5 11:25:37 (none) user.info kernel: ata3: EH complete
Jan 5 11:26:10 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:26:10 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:26:10 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:26:10 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 0c 60 00 00 40 00
Jan 5 11:26:10 (none) user.err kernel: ata3.00: cmd a0/00:00:00:00:fc/00:00:00:00:00/a0 tag 0 pio 131072 in
Jan 5 11:26:10 (none) user.err kernel: res 40/00:02:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:26:10 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:26:10 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:26:10 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:26:10 (none) user.info kernel: ata3.00: configured for PIO4
Jan 5 11:26:10 (none) user.info kernel: ata3: EH complete
Jan 5 11:26:41 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:26:41 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:26:41 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:26:41 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 0c 60 00 00 40 00
Jan 5 11:26:41 (none) user.err kernel: ata3.00: cmd a0/00:00:00:00:fc/00:00:00:00:00/a0 tag 0 pio 131072 in
Jan 5 11:26:41 (none) user.err kernel: res 40/00:02:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:26:41 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:26:41 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:26:41 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:26:41 (none) user.info kernel: ata3.00: configured for PIO4
Jan 5 11:26:41 (none) user.info kernel: ata3: EH complete
Jan 5 11:27:15 (none) user.warn kernel: ata3: lost interrupt (Status 0x58)
Jan 5 11:27:15 (none) user.debug kernel: ata3: drained 65536 bytes to clear DRQ.
Jan 5 11:27:15 (none) user.err kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 5 11:27:15 (none) user.info kernel: sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 01 1e 64 00 00 08 00
Jan 5 11:27:15 (none) user.err kernel: ata3.00: cmd a0/00:00:00:00:40/00:00:00:00:00/a0 tag 0 pio 16384 in
Jan 5 11:27:15 (none) user.err kernel: res 40/00:02:00:00:20/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan 5 11:27:15 (none) user.err kernel: ata3.00: status: { DRDY }
Jan 5 11:27:15 (none) user.info kernel: ata3: soft resetting link
Jan 5 11:27:15 (none) user.debug kernel: ata3.01: NODEV after polling detection
Jan 5 11:27:15 (none) user.info kernel: ata3.00: configured for PIO4
Jan 5 11:27:15 (none) user.info kernel: ata3: EH complete
Jan 5 11:27:22 (none) user.err kernel: INFO: rcu_sched_state detected stall on CPU 0 (t=600090 jiffies)
--- End code ---
Habt ihr auch Probleme oder ist es nur bei mir so...
Ich spiele gerade eine ISO von gestern ein, die scheint zu funktionieren. *HURRA*
Also ich vermute ja das hier was nun nicht mehr läuft, INITRAMFS ist für mich der Kandidat, Oder=??????
Gruß,
Pit
MarMic:
was steht in der install.log?
greetz
P3f:
Hi,
auch nach längerem Warten kommt er nur bis zu dem folgenden Punkt. (replizierbar 3x neu gebootet und sogar einen weiteren DVD-Rohling ausprobiert!).
--- Code: ---==start installation==
==partitioning disk sda==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
The number of cylinders for this disk is set to 953869.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-953869, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-953869, default 953869):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (2-953869, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-953869, default 953869):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (957-953869, default 957): Using default value 957
Last cylinder or +size or +sizeM or +sizeK (957-953869, default 953869): Using default value 953869
Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
64 heads, 32 sectors/track, 953869 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1957887 977920 83 Linux
/dev/sda2 1957888 1953523711 975782912 83 Linux
------ done ------
==format disk sda1==
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
61184 inodes, 244480 blocks
12224 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=251658240
8 block groups
32768 blocks per group, 32768 fragments per group
7648 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: 0/8^H^H^H1/8^H^H^H2/8^H^H^H3/8^H^H^H4/8^H^H^H5/8^H^H^H6/8^H^H^H7/8^H^H^Hdone
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
------ done ------
==format disk sda2==
meta-data=/dev/sda2 isize=256 agcount=4, agsize=60986432 blks
= sectsz=512 attr=2, projid32bit=0
data = bsize=4096 blocks=243945728, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0
log =internal log bsize=4096 blocks=119114, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
------ done ------
==install system on sda1==
--- End code ---
mehr passiert dann nicht ;(
Also, ich sehe den Fehler nicht!!!
Gruß,
Pit
clausmuus:
Kann ich mal per ssh auf Dein System rauf und das install versuchen?
Alternativ (wäre mir lieber) könntest Du in der /usr/sbin/install.sh von Zeile 117 bis Zeile 165 diverse "echo N" einbauen wobei Du N durch 1,2,3,4,... ersätzt, damit wir in der install.log sehen können bis wohin der kommt. Am besten fängst Du mit 5 gleichmäßig verteilten echos an und schaust bis wohin der kommt, dann fügst Du nach dem letzten erfolgreichen echo weitere ein um die genaue Position herauszubekommen wo er hängen bleibt.
Abbrechen kannst Du den Install Vorgang per "killall install.sh".
Claus
P3f:
Hi Claus,
naklar kannst Du auf mein System... Ich schicke Dir gleich meine IP per PM. (Sobald ich alles eingerichtet habe!)
Gruß,
Pit
Navigation
[0] Message Index
[#] Next page
Go to full version