Archiv > Development
Nochmal Xorg Und Xbmc (z.b. Wo Finde Ich Logs)
Christian:
--- Quote --- sp jetzt grade läuft er... bis ich xorg kille und neu starte grrrr
--- Code: ---[ 242.044] (WW) Failed to open protocol names file /usr/lib/xorg/protocol.txt
[ 242.044]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 242.044] X Protocol Version 11, Revision 0
[ 242.044] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[ 242.044] Current Operating System: Linux MLD.localdom 3.0.0.61 #1 SMP Sun Aug 7 03:37:31 CEST 2011 i686
[ 242.044] Kernel command line: initrd=/boot/initrd dev=LABEL=MLD-3.0.0 vga=0x314 splash=silent quiet apm=off QUIET=1 BOOT_IMAGE=/boot/kernel
[ 242.044] Build Date: 21 May 2011 11:38:35AM
[ 242.044] xorg-server 2:1.10.1-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support)
[ 242.044] Current version of pixman: 0.20.2
[ 242.044] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 242.044] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 242.044] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 8 02:02:08 2011
[ 242.044] (==) Using config file: "/etc/X11/xorg.conf"
[ 242.044] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 242.045] (==) ServerLayout "Layout-MLD"
[ 242.045] (**) |-->Screen "Screen0" (0)
[ 242.045] (**) | |-->Monitor "<default monitor>"
[ 242.045] (**) | |-->Device "Device0"
[ 242.045] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 242.045] (**) |-->Screen "Screen1" (1)
[ 242.045] (**) | |-->Monitor "<default monitor>"
[ 242.045] (**) | |-->Device "Device1"
[ 242.045] (==) No monitor specified for screen "Screen1".
Using a default monitor configuration.
[ 242.045] (**) |-->Input Device "Input-event0"
[ 242.045] (**) |-->Input Device "Input-event1"
[ 242.045] (**) Option "Xinerama" "1"
[ 242.045] (==) Automatically adding devices
[ 242.045] (==) Automatically enabling devices
[ 242.045] (**) Xinerama: enabled
[ 242.045] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 242.045] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 242.046] Entry deleted from font path.
[ 242.046] (==) FontPath set to:
built-ins
[ 242.046] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 242.046] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 242.046] (II) Loader magic: 0x81ffde0
[ 242.046] (II) Module ABI versions:
[ 242.046] X.Org ANSI C Emulation: 0.4
[ 242.046] X.Org Video Driver: 10.0
[ 242.046] X.Org XInput driver : 12.3
[ 242.046] X.Org Server Extension : 5.0
[ 242.047] (--) PCI:*(0:1:0:0) 1002:9540:1458:21ae rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[ 242.047] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 242.047] (II) LoadModule: "extmod"
[ 242.047] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 242.047] (II) Module extmod: vendor="X.Org Foundation"
[ 242.047] compiled for 1.10.1, module version = 1.0.0
[ 242.047] Module class: X.Org Server Extension
[ 242.047] ABI class: X.Org Server Extension, version 5.0
[ 242.047] (II) Loading extension MIT-SCREEN-SAVER
[ 242.047] (II) Loading extension XFree86-VidModeExtension
[ 242.047] (II) Loading extension XFree86-DGA
[ 242.047] (II) Loading extension DPMS
[ 242.048] (II) Loading extension XVideo
[ 242.048] (II) Loading extension XVideo-MotionCompensation
[ 242.048] (II) Loading extension X-Resource
[ 242.048] (II) LoadModule: "dbe"
[ 242.048] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 242.048] (II) Module dbe: vendor="X.Org Foundation"
[ 242.048] compiled for 1.10.1, module version = 1.0.0
[ 242.048] Module class: X.Org Server Extension
[ 242.048] ABI class: X.Org Server Extension, version 5.0
[ 242.048] (II) Loading extension DOUBLE-BUFFER
[ 242.048] (II) LoadModule: "glx"
[ 242.048] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 242.048] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 242.048] compiled for 6.9.0, module version = 1.0.0
[ 242.049] (II) Loading extension GLX
[ 242.049] (II) LoadModule: "record"
[ 242.049] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 242.049] (II) Module record: vendor="X.Org Foundation"
[ 242.049] compiled for 1.10.1, module version = 1.13.0
[ 242.049] Module class: X.Org Server Extension
[ 242.049] ABI class: X.Org Server Extension, version 5.0
[ 242.049] (II) Loading extension RECORD
[ 242.049] (II) LoadModule: "dri"
[ 242.049] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 242.049] (II) Module dri: vendor="X.Org Foundation"
[ 242.049] compiled for 1.10.1, module version = 1.0.0
[ 242.049] ABI class: X.Org Server Extension, version 5.0
[ 242.049] (II) Loading extension XFree86-DRI
[ 242.049] (II) LoadModule: "dri2"
[ 242.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 242.050] (II) Module dri2: vendor="X.Org Foundation"
[ 242.050] compiled for 1.10.1, module version = 1.2.0
[ 242.050] ABI class: X.Org Server Extension, version 5.0
[ 242.050] (II) Loading extension DRI2
[ 242.050] (II) LoadModule: "fglrx"
[ 242.050] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 242.100] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 242.101] compiled for 1.4.99.906, module version = 8.87.5
[ 242.101] Module class: X.Org Video Driver
[ 242.104] (II) Loading sub module "fglrxdrm"
[ 242.104] (II) LoadModule: "fglrxdrm"
[ 242.105] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 242.105] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 242.105] compiled for 1.4.99.906, module version = 8.87.5
[ 242.105] (II) LoadModule: "evdev"
[ 242.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 242.106] (II) Module evdev: vendor="X.Org Foundation"
[ 242.106] compiled for 1.10.0.902, module version = 2.6.0
[ 242.106] Module class: X.Org XInput Driver
[ 242.106] ABI class: X.Org XInput driver, version 12.3
[ 242.106] (II) ATI Proprietary Linux Driver Version Identifier:8.87.5
[ 242.106] (II) ATI Proprietary Linux Driver Release Identifier: 8.872
[ 242.106] (II) ATI Proprietary Linux Driver Build Date: Jul 7 2011 22:42:31
[ 242.106] (--) using VT number 5
[ 242.116] (WW) Falling back to old probe method for fglrx
[ 242.130] (II) PCS database file /etc/ati/amdpcsdb not found
[ 242.130] (II) Creating PCS database from initial defaults instead
[ 242.133] (--) Assigning device section with no busID to primary device
[ 242.133] (--) Assigning device section with no busID to primary device
[ 242.133] (WW) fglrx: More than one matching Device section found: Device1
[ 242.133] (--) Chipset Supported AMD Graphics Processor (0x9540) found
[ 242.133] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 242.133] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 242.133] (II) AMD Video driver is signed
[ 242.133] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 242.134] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 242.134] (II) fglrx(0): pEnt->device->identifier=0x8215e28
[ 242.134] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 242.134] (II) Loading sub module "vgahw"
[ 242.134] (II) LoadModule: "vgahw"
[ 242.134] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 242.135] (II) Module vgahw: vendor="X.Org Foundation"
[ 242.135] compiled for 1.10.1, module version = 0.1.0
[ 242.135] ABI class: X.Org Video Driver, version 10.0
[ 242.135] (II) fglrx(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 242.135] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 242.135] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 242.135] (==) fglrx(0): Default visual is TrueColor
[ 242.136] (==) fglrx(0): RGB weight 888
[ 242.136] (II) fglrx(0): Using 8 bits per RGB
[ 242.136] (==) fglrx(0): Buffer Tiling is ON
[ 242.137] (II) Loading sub module "fglrxdrm"
[ 242.137] (II) LoadModule: "fglrxdrm"
[ 242.137] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 242.137] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 242.137] compiled for 1.4.99.906, module version = 8.87.5
[ 242.142] ukiDynamicMajor: found major device number 253
[ 242.142] ukiDynamicMajor: found major device number 253
[ 242.142] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 242.142] ukiOpenDevice: node name is /dev/ati/card0
[ 242.142] ukiOpenDevice: open result is 12, (OK)
[ 242.142] ukiOpenByBusid: ukiOpenMinor returns 12
[ 242.142] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 242.143] (==) fglrx(0): NoAccel = NO
[ 242.143] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 242.143] (--) fglrx(0): Chipset: "ATI Radeon HD 4550 " (Chipset = 0x9540)
[ 242.143] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x21ae)
[ 242.143] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 242.143] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 242.143] (--) fglrx(0): MMIO registers at 0xe5000000
[ 242.143] (--) fglrx(0): I/O port at 0x0000b000
[ 242.143] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 242.146] (II) fglrx(0): AC Adapter is used
[ 242.157] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 242.158] (II) Loading sub module "vbe"
[ 242.158] (II) LoadModule: "vbe"
[ 242.159] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 242.159] (II) Module vbe: vendor="X.Org Foundation"
[ 242.159] compiled for 1.10.1, module version = 1.1.0
[ 242.159] ABI class: X.Org Video Driver, version 10.0
[ 242.159] (II) fglrx(0): VESA BIOS detected
[ 242.159] [ 242.159] (II) fglrx(0): VESA VBE Version 3.0
[ 242.159] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 242.159] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 242.159] (II) fglrx(0): VESA VBE OEM Software Rev: 11.12
[ 242.159] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 242.159] (II) fglrx(0): VESA VBE OEM Product: RV710
[ 242.159] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 242.185] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 242.185] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 242.185] (II) fglrx(0): PCIE card detected
[ 242.185] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 242.185] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 242.189] (II) fglrx(0): Using adapter: 1:0.0.
[ 242.218] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 242.302] (II) fglrx(0): Interrupt handler installed at IRQ 16.
[ 242.302] (II) fglrx(0): RandR 1.2 support is enabled!
[ 242.302] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 242.303] (==) fglrx(0): Center Mode is disabled
[ 242.303] (II) Loading sub module "fb"
[ 242.303] (II) LoadModule: "fb"
[ 242.303] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 242.303] (II) Module fb: vendor="X.Org Foundation"
[ 242.303] compiled for 1.10.1, module version = 1.0.0
[ 242.303] ABI class: X.Org ANSI C Emulation, version 0.4
[ 242.303] (II) Loading sub module "ddc"
[ 242.303] (II) LoadModule: "ddc"
[ 242.303] (II) Module "ddc" already built-in
[ 242.865] (II) fglrx(0): Finished Initialize PPLIB!
[ 242.881] (II) fglrx(0): Output DFP1 has no monitor section
[ 242.881] (II) fglrx(0): Output DFP2 has no monitor section
[ 242.881] (II) fglrx(0): Output CRT1 has no monitor section
[ 242.881] (II) fglrx(0): Output CRT2 has no monitor section
[ 242.881] (II) Loading sub module "ddc"
[ 242.881] (II) LoadModule: "ddc"
[ 242.881] (II) Module "ddc" already built-in
[ 242.881] (II) fglrx(0): Connected Display0: CRT2
[ 242.881] (II) fglrx(0): Display0 EDID data ---------------------------
[ 242.881] (II) fglrx(0): Manufacturer: FUS Model: 735 Serial#: 16843009
[ 242.881] (II) fglrx(0): Year: 2007 Week: 45
[ 242.881] (II) fglrx(0): EDID Version: 1.3
[ 242.881] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 242.881] (II) fglrx(0): Sync: Separate
[ 242.881] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 242.881] (II) fglrx(0): Gamma: 2.30
[ 242.881] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 242.882] (II) fglrx(0): First detailed timing is preferred mode
[ 242.882] (II) fglrx(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 242.882] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 242.882] (II) fglrx(0): Supported established timings:
[ 242.882] (II) fglrx(0): 720x400@70Hz
[ 242.882] (II) fglrx(0): 640x480@60Hz
[ 242.882] (II) fglrx(0): 640x480@75Hz
[ 242.882] (II) fglrx(0): 800x600@60Hz
[ 242.882] (II) fglrx(0): 800x600@75Hz
[ 242.882] (II) fglrx(0): 1024x768@60Hz
[ 242.882] (II) fglrx(0): 1024x768@75Hz
[ 242.882] (II) fglrx(0): 1280x1024@75Hz
[ 242.882] (II) fglrx(0): Manufacturer's mask: 0
[ 242.882] (II) fglrx(0): Supported standard timings:
[ 242.882] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 242.882] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 242.882] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 242.882] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 242.882] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 242.882] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 242.882] (II) fglrx(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 242.882] (II) fglrx(0): Supported detailed timing:
[ 242.882] (II) fglrx(0): clock: 147.0 MHz Image Size: 474 x 296 mm
[ 242.882] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 242.882] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 242.882] (II) fglrx(0): Serial No: YE2H025600
[ 242.882] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 155 MHz
[ 242.882] (II) fglrx(0): Monitor name: L22W-5
[ 242.882] (II) fglrx(0): EDID (in hex):
[ 242.882] (II) fglrx(0): 00ffffffffffff001ab3350701010101
[ 242.882] (II) fglrx(0): 2d110103682f1e822ad425a455499b27
[ 242.882] (II) fglrx(0): 135054a54b00950f81808140714f9500
[ 242.882] (II) fglrx(0): b30081c001016c399030621a274068b0
[ 242.882] (II) fglrx(0): 3600da281100001c000000ff00594532
[ 242.882] (II) fglrx(0): 483032353630300a2020000000fd0038
[ 242.882] (II) fglrx(0): 4b1f530f2d0a20560a202020000000fc
[ 242.882] (II) fglrx(0): 004c3232572d350a2020202020200067
[ 242.882] (II) fglrx(0): End of Display0 EDID data --------------------
[ 242.935] (II) fglrx(0): EDID for output DFP1
[ 242.935] (II) fglrx(0): EDID for output DFP2
[ 242.935] (II) fglrx(0): EDID for output CRT1
[ 242.935] (II) fglrx(0): EDID for output CRT2
[ 242.935] (II) fglrx(0): Manufacturer: FUS Model: 735 Serial#: 16843009
[ 242.935] (II) fglrx(0): Year: 2007 Week: 45
[ 242.935] (II) fglrx(0): EDID Version: 1.3
[ 242.935] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 242.935] (II) fglrx(0): Sync: Separate
[ 242.935] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 242.935] (II) fglrx(0): Gamma: 2.30
[ 242.935] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 242.935] (II) fglrx(0): First detailed timing is preferred mode
[ 242.935] (II) fglrx(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 242.935] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 242.935] (II) fglrx(0): Supported established timings:
[ 242.935] (II) fglrx(0): 720x400@70Hz
[ 242.935] (II) fglrx(0): 640x480@60Hz
[ 242.935] (II) fglrx(0): 640x480@75Hz
[ 242.935] (II) fglrx(0): 800x600@60Hz
[ 242.935] (II) fglrx(0): 800x600@75Hz
[ 242.935] (II) fglrx(0): 1024x768@60Hz
[ 242.935] (II) fglrx(0): 1024x768@75Hz
[ 242.935] (II) fglrx(0): 1280x1024@75Hz
[ 242.935] (II) fglrx(0): Manufacturer's mask: 0
[ 242.935] (II) fglrx(0): Supported standard timings:
[ 242.935] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 242.935] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 242.935] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 242.935] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 242.935] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 242.935] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 242.935] (II) fglrx(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 242.935] (II) fglrx(0): Supported detailed timing:
[ 242.935] (II) fglrx(0): clock: 147.0 MHz Image Size: 474 x 296 mm
[ 242.935] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 242.935] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 242.935] (II) fglrx(0): Serial No: YE2H025600
[ 242.935] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 155 MHz
[ 242.935] (II) fglrx(0): Monitor name: L22W-5
[ 242.935] (II) fglrx(0): EDID (in hex):
[ 242.935] (II) fglrx(0): 00ffffffffffff001ab3350701010101
[ 242.936] (II) fglrx(0): 2d110103682f1e822ad425a455499b27
[ 242.936] (II) fglrx(0): 135054a54b00950f81808140714f9500
[ 242.936] (II) fglrx(0): b30081c001016c399030621a274068b0
[ 242.936] (II) fglrx(0): 3600da281100001c000000ff00594532
[ 242.936] (II) fglrx(0): 483032353630300a2020000000fd0038
[ 242.936] (II) fglrx(0): 4b1f530f2d0a20560a202020000000fc
[ 242.936] (II) fglrx(0): 004c3232572d350a2020202020200067
[ 242.936] (II) fglrx(0): Printing probed modes for output CRT2
[ 242.936] (II) fglrx(0): Modeline "1680x1050"x60.0 147.00 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.6 kHz)
[ 242.936] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 242.936] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 242.936] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 242.936] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 242.936] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 242.936] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 242.936] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 242.936] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 242.936] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 242.936] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 242.936] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 242.936] (II) fglrx(0): Output DFP1 disconnected
[ 242.936] (II) fglrx(0): Output DFP2 disconnected
[ 242.936] (II) fglrx(0): Output CRT1 disconnected
[ 242.936] (II) fglrx(0): Output CRT2 connected
[ 242.936] (II) fglrx(0): Using exact sizes for initial modes
[ 242.936] (II) fglrx(0): Output CRT2 using initial mode 1680x1050
[ 242.936] (II) fglrx(0): DPI set to (96, 96)
[ 242.936] (II) fglrx(0): Adapter ATI Radeon HD 4550 has 2 configurable heads and 1 displays connected.
[ 242.936] (==) fglrx(0): PseudoColor visuals disabled
[ 242.936] (II) Loading sub module "ramdac"
[ 242.937] (II) LoadModule: "ramdac"
[ 242.937] (II) Module "ramdac" already built-in
[ 242.937] (==) fglrx(0): NoDRI = NO
[ 242.937] (==) fglrx(0): Capabilities: 0x00000000
[ 242.937] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 242.937] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 242.937] (==) fglrx(0): UseFastTLS=0
[ 242.937] (==) fglrx(0): BlockSignalsOnLock=1
[ 242.937] (--) Depth 24 pixmap format is 32 bpp
[ 242.937] (II) Loading extension ATIFGLRXDRI
[ 242.937] (II) fglrx(0): doing swlDriScreenInit
[ 242.937] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 242.937] ukiDynamicMajor: found major device number 253
[ 242.937] ukiDynamicMajor: found major device number 253
[ 242.937] ukiDynamicMajor: found major device number 253
[ 242.937] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 242.937] ukiOpenDevice: node name is /dev/ati/card0
[ 242.937] ukiOpenDevice: open result is 17, (OK)
[ 242.937] ukiOpenByBusid: ukiOpenMinor returns 17
[ 242.937] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 242.937] (II) fglrx(0): [uki] DRM interface version 1.0
[ 242.937] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 242.937] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 242.937] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6480000
[ 242.937] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 242.937] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 242.937] (II) fglrx(0): swlDriScreenInit done
[ 242.937] (II) fglrx(0): Kernel Module Version Information:
[ 242.937] (II) fglrx(0): Name: fglrx
[ 242.937] (II) fglrx(0): Version: 8.87.5
[ 242.937] (II) fglrx(0): Date: Jul 7 2011
[ 242.937] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 242.938] (II) fglrx(0): Kernel Module version matches driver.
[ 242.938] (II) fglrx(0): Kernel Module Build Time Information:
[ 242.938] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.0.0.61
[ 242.938] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 242.938] (II) fglrx(0): Build-Kernel __SMP__: no
[ 242.938] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 242.938] (II) fglrx(0): [uki] register handle = 0x00004000
[ 242.950] (II) fglrx(0): DRI initialization successfull
[ 242.950] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01008000
[ 242.950] (==) fglrx(0): Backing store disabled
[ 242.950] (II) Loading extension FGLRXEXTENSION
[ 242.950] (==) fglrx(0): DPMS enabled
[ 242.950] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 242.950] (**) fglrx(0): Textured Video is enabled.
[ 242.950] (II) LoadModule: "glesx"
[ 242.951] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 242.983] (II) Module glesx: vendor="X.Org Foundation"
[ 242.983] compiled for 1.4.99.906, module version = 1.0.0
[ 242.984] (II) Loading extension GLESX
[ 242.984] (II) fglrx(0): GLESX enableFlags = 528
[ 242.984] (II) fglrx(0): GLESX is enabled
[ 242.984] (II) LoadModule: "amdxmm"
[ 242.984] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 242.986] (II) Module amdxmm: vendor="X.Org Foundation"
[ 242.986] compiled for 1.4.99.906, module version = 2.0.0
[ 242.986] (II) Loading extension AMDXVOPL
[ 242.986] (II) Loading extension AMDXVBA
[ 242.990] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 242.992] (II) fglrx(0): Composite extension is not loaded
[ 242.992] (WW) fglrx(0): Option "DPI" is not used
[ 242.992] (II) fglrx(0): X context handle = 0x1
[ 242.992] (II) fglrx(0): [DRI] installation complete
[ 242.992] (==) fglrx(0): Silken mouse enabled
[ 242.993] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 242.993] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 243.105] (--) RandR disabled
[ 243.105] (II) Initializing built-in extension Generic Event Extension
[ 243.105] (II) Initializing built-in extension SHAPE
[ 243.105] (II) Initializing built-in extension MIT-SHM
[ 243.105] (II) Initializing built-in extension XInputExtension
[ 243.105] (II) Initializing built-in extension XTEST
[ 243.105] (II) Initializing built-in extension BIG-REQUESTS
[ 243.105] (II) Initializing built-in extension SYNC
[ 243.105] (II) Initializing built-in extension XKEYBOARD
[ 243.105] (II) Initializing built-in extension XC-MISC
[ 243.105] (II) Initializing built-in extension SECURITY
[ 243.105] (II) Initializing built-in extension XINERAMA
[ 243.105] (II) Initializing built-in extension XFIXES
[ 243.105] (II) Initializing built-in extension RENDER
[ 243.105] (II) Initializing built-in extension RANDR
[ 243.105] (II) Initializing built-in extension COMPOSITE
[ 243.105] (II) Initializing built-in extension DAMAGE
[ 243.105] (II) Initializing built-in extension GESTURE
[ 243.105] ukiDynamicMajor: found major device number 253
[ 243.105] ukiDynamicMajor: found major device number 253
[ 243.105] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 243.105] ukiOpenDevice: node name is /dev/ati/card0
[ 243.105] ukiOpenDevice: open result is 18, (OK)
[ 243.105] ukiOpenByBusid: ukiOpenMinor returns 18
[ 243.105] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 243.457] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 243.468] (II) fglrx(0): Enable the clock gating!
[ 243.469] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 243.473] (II) XKB: reuse xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 243.473] [ 243.474] (II) Using input driver 'evdev' for 'Input-event0'
[ 243.474] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 243.474] [ 243.474] [ 243.474] [ 243.474] [ 243.474] (**) Input-event0: always reports core events
[ 243.474] (**) Input-event0: Device: "/dev/input/event0"
[ 243.474] (--) Input-event0: Found keys
[ 243.474] (II) Input-event0: Configuring as keyboard
[ 243.474] (II) XINPUT: Adding extended input device "Input-event0" (type: KEYBOARD)
[ 243.474] (**) Option "xkb_rules" "evdev"
[ 243.474] (**) Option "xkb_model" "evdev"
[ 243.474] (**) Option "xkb_layout" "us"
[ 243.476] (II) XKB: reuse xkmfile /tmp/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[ 243.477] (II) Using input driver 'evdev' for 'Input-event1'
[ 243.477] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 243.477] [ 243.477] [ 243.477] [ 243.477] [ 243.477] (**) Input-event1: always reports core events
[ 243.477] (**) Input-event1: Device: "/dev/input/event1"
[ 243.477] (--) Input-event1: Found 20 mouse buttons
[ 243.477] (--) Input-event1: Found scroll wheel(s)
[ 243.477] (--) Input-event1: Found relative axes
[ 243.477] (--) Input-event1: Found x and y relative axes
[ 243.477] (--) Input-event1: Found keys
[ 243.477] (II) Input-event1: Configuring as mouse
[ 243.477] (II) Input-event1: Configuring as keyboard
[ 243.477] (II) Input-event1: Adding scrollwheel support
[ 243.477] (**) Input-event1: YAxisMapping: buttons 4 and 5
[ 243.477] (**) Input-event1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 243.477] (II) XINPUT: Adding extended input device "Input-event1" (type: KEYBOARD)
[ 243.477] (**) Option "xkb_rules" "evdev"
[ 243.477] (**) Option "xkb_model" "evdev"
[ 243.477] (**) Option "xkb_layout" "us"
[ 243.477] [ 243.477] (II) Input-event1: initialized for relative axes.
[ 243.478] (**) Input-event1: (accel) keeping acceleration scheme 1
[ 243.478] (**) Input-event1: (accel) acceleration profile 0
[ 243.478] (**) Input-event1: (accel) acceleration factor: 2.000
[ 243.478] (**) Input-event1: (accel) acceleration threshold: 4
[ 250.995] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
--- End code ---
vdr ist bedienbar aufruf von fglxinfo oder xbmc mit DISPLAY... -> segfault
vdrfrontend per osd geschloßen -> deadlock....
ich habe nimmer die nerven mich mit ati rumzuschlagen
--- End quote ---
hilft ein entlden der Treiber und dann ein neustart des xorg?
ich habe glaube soetwas schon gelesen?! bin mir aber nicht sicher...
@marmic: sehe ich das richtig das nur am xorg-ati addon der eine link wieder einkommentiert werden muss ?
MarMic:
jop
clausmuus:
OK, hab das geändert. Neues Addon ist online.
Ich war am Wochenende leider nicht dazu gekommen das selber zu testen...
Claus
Christian:
wegen den seg faults :
schon mal so probiert:
--- Code: ---export LIBGL_DEBUG=verbose
fglrxinfo
--- End code ---
kommen dann mehr infos?
liegt höchstwahrscheinlich an der libGL die passt nicht ?!?!
MarMic:
hatte vergessen... im ordner fglrx muss die fglrx-libglx-soin libgl-so umbenannt oder verlintk werden
@claus haste das auch gemacht?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version