Bugs In Mld-3.x

Archiv > Development

Bugs In Mld-3.x

<< < (8/81) > >>

Matthias:
Beim ersten Start des VDRs von der Live CD habe ich keinen Ton, erst nach rcvdr stop/start kommt Ton.
Evtl. hilft die sysinit:
Der Abschnitt mit Alsa und Dummy Device taucht erst beim rcvdr stop/start auf

--- Code: ---Listen on IP: 192.168.115.28
--done--
Setting up setup menu:
--done--
Warning, unsupported format in ClearPicBuffer!
apm: No online connection or timeout to: [URL=http://www.minidvblinux.dyndns.org/addons.php?version=3.0.0&class=stable&user=marmic]http://www.minidvblinux.dyndns.org/addons....ble&user=marmic[/URL]
19:44:30.0236 D [5158] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 0
19:44:30.0644 D [5163] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 0
[mpeg2video @ 0x827cc50]mpeg_decode_postinit() failure
[mpeg2video @ 0x827cc50]insufficient thread locking around avcodec_open/close()
Error not closing context 0x827cc50, codec (nil)
19:44:43.0385 D [5168] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 0
Last message repeated 1 times
[mpeg2video @ 0x83277a0]mpeg_decode_postinit() failure
Warning, unsupported format in ClearPicBuffer!
19:44:48.0448 D [5173] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 106
Last message repeated 3 times
[mpeg2video @ 0x82b2420]mpeg_decode_postinit() failure
19:44:56.0439 D [5179] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 162
19:45:14.0399 D [5188] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 391
Segmentation fault
Found hardware: "ICH4" "Analog Devices AD1981B" "AC97a:41445374" "0x1734" "0x0088"
Hardware is initialized using a generic method
Loading usb dvb driver
[1A[70G[1;32mdone--
softdevice: Created setupStoreId 98305!
softdevice: Attatched to setupStoreId 98305 at 0xb7220000.
[softdevice] processing args
[softdevice] argv [0] = softdevice
[softdevice] argv [1] = -vo
[setup-softdevice] mainMenu: 0
[setup-softdevice] vidBrightness: 50
[setup-softdevice] vidContrast: 50
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg build(3426306)
Warning, unsupported format in ClearPicBuffer!
[softdevice] Subplugin successfully opend
[softdevice] Video Out seems to be OK
[softdevice] Initializing Audio Out
[softdevice] audio-alsa not compiled in. Using audio dummy!
[softdevice] audio-macos not compiled in. Using audio dummy!
[softdevice] Audio out seems to be OK
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder
19:46:46.0594 D [5622] [VideoOut] reset: sync info: repF = 0, drpF = 0, totF = 0
[mpeg2video @ 0x827ee70]mpeg_decode_postinit() failure
[mpeg2video @ 0x827ee70]insufficient thread locking around avcodec_open/close()

--- End code ---

MarMic:
hi matt,

der segfault gefällt mir ganz und gar nicht...

ehm ansonsten mach mal bevor du sysinit postest

catsysinit > /root/ausgabe.txt

dann ist das schön formatiert und lesbar

und setz bitte das zeug in die code tags also [CODE} deine ausgabe [/CODE}

wobei man die } durch eine ] ersetzen muss

greetz und ich sag auch mal n8

Matthias:
Das angepasste ISO macht eine erfolgreiche HD Installation inkl. OSD Ausgabe während der Installation!
Eine Bitte, im Anschluss an die HD Installation bitte die CD auswerfen lassen.

Und nun zu den Bugs...

Ich habe beim Start der Live CD die korrekte DVB-T channels.conf ausgewählt. Damit hatte ich auch ein TV Bild.
Es wird aber bei der HD Installation die DVB-All übernommen, sowohl im OSD als auch in der rc.config.
Wenn ich den Eintrag in der rc.config händisch ändere, wird die

Matthias:
Dann war ich noch mal gemein und habe den DVB USB Stick gegen eine PCI HVR-1300 getauscht.
Die HVR-1300 wurde von der Live VD bislang auf Anhieb erkannt.

Jetzt wird sie zwar auch korrekt erkannt, aber es passt trotzdem nicht

--- Code: ---Jan 6 06:20:37 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
Jan 6 06:20:37 (none) user.info kernel: cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
Jan 6 06:20:37 (none) user.info kernel: cx88[0]: TV tuner type 63, Radio tuner type -1
Jan 6 06:20:37 (none) user.warn kernel: cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
Jan 6 06:20:37 (none) user.info kernel: tuner 0-0043: chip found @ 0x86 (cx88[0])
Jan 6 06:20:37 (none) user.info kernel: tda9887 0-0043: creating new instance
Jan 6 06:20:37 (none) user.info kernel: tda9887 0-0043: tda988[5/6/7] found
Jan 6 06:20:38 (none) user.info kernel: tuner 0-0061: chip found @ 0xc2 (cx88[0])
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: Hauppauge model 96019, rev C6A0, serial# 543568
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: MAC address is 00:0d:fe:08:4b:50
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: audio processor is CX882 (idx 33)
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: decoder processor is CX882 (idx 25)
Jan 6 06:20:38 (none) user.info kernel: tveeprom 0-0050: has radio, has IR receiver, has IR transmitter
Jan 6 06:20:38 (none) user.info kernel: cx88[0]: hauppauge eeprom: model=96019
Jan 6 06:20:38 (none) user.info kernel: tuner-simple 0-0061: creating new instance
Jan 6 06:20:38 (none) user.info kernel: tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jan 6 06:20:38 (none) user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Jan 6 06:20:38 (none) user.info kernel: cx88-mpeg driver manager 0000:02:07.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jan 6 06:20:38 (none) user.info kernel: cx88[0]/2: found at 0000:02:07.2, rev: 5, irq: 18, latency: 64, mmio: 0xc3000000
Jan 6 06:20:38 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.8 loaded
Jan 6 06:20:38 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
Jan 6 06:20:38 (none) user.info kernel: cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Jan 6 06:20:38 (none) user.info kernel: cx88[0]/2: cx2388x based DVB/ATSC card
Jan 6 06:20:38 (none) user.info kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
Jan 6 06:20:38 (none) user.info kernel: tuner-simple 0-0061: attaching existing instance
Jan 6 06:20:38 (none) user.info kernel: tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jan 6 06:20:38 (none) user.info kernel: DVB: registering new adapter (cx88[0])
Jan 6 06:20:38 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
Jan 6 06:20:38 (none) user.info kernel: bttv: driver version 0.9.18 loaded
Jan 6 06:20:38 (none) user.info kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Jan 6 06:20:38 (none) user.info kernel: bt878: AUDIO driver version 0.0.0 loaded
Jan 6 06:20:38 (none) user.warn kernel: saa7146: register extension 'dvb'.
Jan 6 06:20:38 (none) user.info kernel: ivtv: Start initialization, version 1.4.2
Jan 6 06:20:38 (none) user.info kernel: ivtv: End initialization
Jan 6 06:20:38 (none) user.info kernel: saa7130/34: v4l2 driver version 0.2.16 loaded

--- End code ---

--- Code: ---Jan 6 06:24:28 (none) user.err kernel: INFO: task modprobe:4614 blocked for more than 120 seconds.
Jan 6 06:24:28 (none) user.err kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 6 06:24:28 (none) user.info kernel: modprobe D f612593c 0 4614 4605 0x00000000
Jan 6 06:24:28 (none) user.warn kernel: f61257d0 00000082 c15702e0 f612593c 00000000 c1602680 c1602680 22222222
Jan 6 06:24:28 (none) user.warn kernel: 00000005 00000003 f91c3554 c1045efa f91c3554 f61257d0 fffffff0 f6986000
Jan 6 06:24:28 (none) user.warn kernel: c1046b56 656e7574 c1070072 00000097 00000246 00000000 f6b72494 f55cac7c
Jan 6 06:24:28 (none) user.warn kernel: Call Trace:
Jan 6 06:24:28 (none) user.warn kernel: [<c1045efa>] ? module_refcount+0x67/0x78
Jan 6 06:24:28 (none) user.warn kernel: [<c1046b56>] ? sys_delete_module+0x16b/0x1df
Jan 6 06:24:28 (none) user.warn kernel: [<c1070072>] ? ftrace_define_fields_kmem_alloc+0x66/0x9f
Jan 6 06:24:28 (none) user.warn kernel: [<c1077270>] ? remove_vma+0x43/0x48
Jan 6 06:24:28 (none) user.warn kernel: [<c10780fe>] ? do_munmap+0x1f0/0x208
Jan 6 06:24:28 (none) user.warn kernel: [<c1002650>] ? sysenter_do_call+0x12/0x26
Jan 6 06:26:28 (none) user.err kernel: INFO: task modprobe:4614 blocked for more than 120 seconds.
Jan 6 06:26:28 (none) user.err kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 6 06:26:28 (none) user.info kernel: modprobe D f612593c 0 4614 4605 0x00000000
Jan 6 06:26:28 (none) user.warn kernel: f61257d0 00000082 c15702e0 f612593c 00000000 c1602680 c1602680 22222222
Jan 6 06:26:28 (none) user.warn kernel: 00000005 00000003 f91c3554 c1045efa f91c3554 f61257d0 fffffff0 f6986000
Jan 6 06:26:28 (none) user.warn kernel: c1046b56 656e7574 c1070072 00000097 00000246 00000000 f6b72494 f55cac7c
Jan 6 06:26:28 (none) user.warn kernel: Call Trace:
Jan 6 06:26:28 (none) user.warn kernel: [<c1045efa>] ? module_refcount+0x67/0x78
Jan 6 06:26:28 (none) user.warn kernel: [<c1046b56>] ? sys_delete_module+0x16b/0x1df
Jan 6 06:26:28 (none) user.warn kernel: [<c1070072>] ? ftrace_define_fields_kmem_alloc+0x66/0x9f
Jan 6 06:26:28 (none) user.warn kernel: [<c1077270>] ? remove_vma+0x43/0x48
Jan 6 06:26:28 (none) user.warn kernel: [<c10780fe>] ? do_munmap+0x1f0/0x208
Jan 6 06:26:28 (none) user.warn kernel: [<c1002650>] ? sysenter_do_call+0x12/0x26
Jan 6 06:28:28 (none) user.err kernel: INFO: task modprobe:4614 blocked for more than 120 seconds.
Jan 6 06:28:28 (none) user.err kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 6 06:28:28 (none) user.info kernel: modprobe D f612593c 0 4614 4605 0x00000000
Jan 6 06:28:28 (none) user.warn kernel: f61257d0 00000082 c15702e0 f612593c 00000000 c1602680 c1602680 22222222
Jan 6 06:28:28 (none) user.warn kernel: 00000005 00000003 f91c3554 c1045efa f91c3554 f61257d0 fffffff0 f6986000
Jan 6 06:28:28 (none) user.warn kernel: c1046b56 656e7574 c1070072 00000097 00000246 00000000 f6b72494 f55cac7c
Jan 6 06:28:28 (none) user.warn kernel: Call Trace:
Jan 6 06:28:28 (none) user.warn kernel: [<c1045efa>] ? module_refcount+0x67/0x78
Jan 6 06:28:28 (none) user.warn kernel: [<c1046b56>] ? sys_delete_module+0x16b/0x1df
Jan 6 06:28:28 (none) user.warn kernel: [<c1070072>] ? ftrace_define_fields_kmem_alloc+0x66/0x9f
Jan 6 06:28:28 (none) user.warn kernel: [<c1077270>] ? remove_vma+0x43/0x48
Jan 6 06:28:28 (none) user.warn kernel: [<c10780fe>] ? do_munmap+0x1f0/0x208
Jan 6 06:28:28 (none) user.warn kernel: [<c1002650>] ? sysenter_do_call+0x12/0x26

--- End code ---

Matthias:
Nachtrag:
Ein modprobe budget_ci + rcvdr start bringt den VDR wieder online
budget_ci ist der korrekte Treiber für HVR-1300
Und noch mal einen Reboot und dieses Mal habe ich auf Anhieb TV Bild.
In der rc.config ist wie folgt eingetragen:

# DVB-Treiber die geladen werden sollen ('' f

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version