Fernbedienung TTS35AI technisat mld5.4 auf Pi3 und sundteck Dual receiver

MLD-5.x > Systems

(1/6) > >>

jenspf:
Hallo Zusammen.
Im Laufe der LinVDR und yaVDR Jahre haben sich einige Fernbedienungen TTS35AI der SkyStar2 von Technisat angesammelt.
Gerne würde ich die nun auf einem RaspPi3+ mit einer sundtek Dual Receiver Karte laufen lassen.
Hat das schon mal jemand hin bekommen?
Gruß Jens

clausmuus:
Die Sundtek Receiver laufen gewöhnlich ziemlich gut. Zu der Dualtuner Karte im speziellen kann ich aber nichts sagen.

jenspf:
In der MLD Konfiguration der Fernbedienung, kann man sogar die TTS35AI FB auswählen,
aber welcher Lirc Treiber ist der richtige?
Gruß Jens

sundtek:
Bei Lirc muss das Linux Input Layer verwendet werden

Es ist schon sehr lange her dass ich mich mit IR beschäftigt habe, insbesondere 3rd Party. Das Problem welches Du halt erst mal hast ist ob diese überhaupt das NEC Protokoll spricht.

/opt/bin/mediaclient --setrcmap=/keymapfile -d /dev/mediainput0

Dort noch ein Beitrag als Referenz:
https://support.sundtek.com/index.php?topic=1990.0

jenspf:
Nach den Neustart zeigt das Systemlog das hier an:
...
Jun 25 15:13:54 (none) user.warn kernel: [ 14.554456] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
Jun 25 15:13:54 (none) user.info kernel: [ 14.557918] bcm2835_audio soc:audio: card created with 8 channels
Jun 25 15:13:54 (none) user.notice kernel: [ 14.716512] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jun 25 15:13:54 (none) user.notice kernel: [ 14.747520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun 25 15:13:54 (none) user.warn kernel: [ 14.747794] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Jun 25 15:13:54 (none) user.info kernel: [ 14.747801] cfg80211: failed to load regulatory.db
Jun 25 15:13:54 (none) user.info kernel: [ 14.792508] Registered IR keymap rc-rc6-mce
Jun 25 15:13:54 (none) user.info kernel: [ 14.792631] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
Jun 25 15:13:54 (none) user.info kernel: [ 14.792766] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input5
Jun 25 15:13:54 (none) user.debug kernel: [ 14.798237] brcmfmac: F1 signature read @0x18000000=0x15264345
Jun 25 15:13:54 (none) user.err kernel: [ 14.805407] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 25 15:13:54 (none) user.info kernel: [ 14.806700] usbcore: registered new interface driver brcmfmac
Jun 25 15:13:54 (none) user.err kernel: [ 15.113364] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 25 15:13:54 (none) user.err kernel: [ 15.137584] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
Jun 25 15:13:58 (none) user.info kernel: [ 19.023669] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 25 15:13:58 (none) user.info kernel: [ 19.034824] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 25 15:14:00 (none) user.notice kernel: [ 20.638856] XFS (mmcblk0p3): Mounting V5 Filesystem
Jun 25 15:14:02 (none) user.info kernel: [ 23.015459] XFS (mmcblk0p3): Ending clean mount
Jun 25 15:14:02 (none) user.warn kernel: [ 23.077105] usb 1-1.1.2: usbfs: process 1217 (mediasrv) did not claim interface 0 before use
Jun 25 15:14:02 (none) user.info kernel: [ 23.129979] input: Sundtek Remote Control as /devices/virtual/input/input6
Jun 25 15:14:35 (none) user.info kernel: [ 25.491563] input: eventlircd as /devices/virtual/input/input8
Jun 25 15:14:47 (none) user.err vdr: [1810] [live] INFO: validating server ip '0.0.0.0'
Jun 25 15:14:49 (none) user.err vdr: [1844] [live] INFO: attempt to listen on ip = '0.0.0.0'
Jun 25 15:14:56 (none) user.err vdr: [1810] ERROR: attempt to open OSD while it is already open - using dummy OSD!
Jun 25 15:14:56 (none) user.err vdr: [1810] ERROR: attempt to open OSD while it is already open - using dummy OSD!
Jun 25 15:15:01 (none) local0.info lircd-0.9.4c[2230]: Info: lircd: Opening log, level: Info
Jun 25 15:15:02 (none) local0.err lircd-0.9.4c[2230]: Error: No matching /dev/lirc device found for "auto"
Jun 25 15:15:02 (none) local0.err lircd-0.9.4c[2230]: Error: No matching /dev/lirc device found for "auto"
Jun 25 15:15:02 (none) local0.info lircd-0.9.4c[2230]: Info: lircd: Opening log, level: Info
Jun 25 15:15:02 (none) local0.warn lircd-0.9.4c[2230]: Warning: Running as root
Jun 25 15:15:02 (none) local0.info lircd-0.9.4c[2230]: Info: Using remote: Technisat_TTS35AI.conf.
Jun 25 15:15:02 (none) local0.notice lircd-0.9.4c[2314]: Notice: lircd(default) ready, using /var/run/lirc/lircd-default
Jun 25 15:15:03 (none) local0.info lircd-0.9.4c[2411]: Info: lircd-uinput: Opening log, level: Info
Jun 25 15:15:03 (none) local0.info lircd-0.9.4c[2411]: Info: Reading data from /var/run/lirc/lircd-default, writing to /dev/uinput
Jun 25 15:15:03 (none) local0.info lircd-0.9.4c[2411]: Info: Adding release events after a 200 ms timeout
Jun 25 15:15:03 (none) local0.info lircd-0.9.4c[2411]: Info: Using "_UP" as release suffix
Jun 25 15:15:03 (none) local0.notice lircd-0.9.4c[2314]: Notice: accepted new client on /var/run/lirc/lircd-default
Jun 25 15:15:03 (none) local0.info lircd-0.9.4c[2314]: Info: Cannot configure the rc device for /dev/lirc0
Jun 25 15:15:03 (none) local0.err lircd-0.9.4c[2314]: Error: could not get file information for /dev/lirc0
Jun 25 15:15:03 (none) local0.err lircd-0.9.4c[2314]: default_init(): No such file or directory
Jun 25 15:15:03 (none) local0.warn lircd-0.9.4c[2314]: Warning: Failed to initialize hardware
Jun 25 15:15:03 (none) user.info kernel: [ 53.191300] input: lircd-uinput as /devices/virtual/input/input10
Jun 25 15:15:03 (none) daemon.err nmbd[2424]: [2021/06/25 15:15:03.685499, 0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun 25 15:15:03 (none) daemon.err nmbd[2424]: STATUS=daemon 'nmbd' finished starting up and ready to serve connections
Jun 25 15:15:03 (none) user.info kernel: [ 53.439742] input: eventlircd as /devices/virtual/input/input11
Jun 25 15:15:04 (none) daemon.err smbd[2428]: [2021/06/25 15:15:04.032462, 0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun 25 15:15:04 (none) daemon.err smbd[2428]: STATUS=daemon 'smbd' finished starting up and ready to serve connections
Jun 25 15:15:05 (none) auth.info login[2525]: root login on 'tty1'
Jun 25 15:15:05 (none) auth.info login[2526]: root login on 'tty2'
Jun 25 15:15:05 (none) auth.info login[2529]: root login on 'tty3'
Jun 25 15:15:05 (none) auth.info login[2531]: root login on 'tty4'
Jun 25 15:15:26 (none) daemon.err nmbd[2424]: [2021/06/25 15:15:26.756079, 0] ../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
Jun 25 15:15:26 (none) daemon.err nmbd[2424]: *****
Jun 25 15:15:26 (none) daemon.err nmbd[2424]:
Jun 25 15:15:26 (none) daemon.err nmbd[2424]: Samba name server MLD is now a local master browser for workgroup FRITZ.BOX on subnet 192.168.178.62
Jun 25 15:15:26 (none) daemon.err nmbd[2424]:
Jun 25 15:15:26 (none) daemon.err nmbd[2424]: *****

Ihr seht schon, bin kein Linux Experte. :-) Gruß

Navigation

[0] Message Index

[#] Next page

Go to full version