[1] 2 >>> MLD-5.x / General / DVB-T2
 

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« on: March 04, 2017, 13:18:56 »
Hi,

bei der MLD-5.3 unterstützt das VDR Ausgabedevice für PCs (nicht RPI und co.) ja schon etwas länger das Anzeigen von DVB-T2 HD Sendern. Jetzt habe ich auch endlich das Tool zum erstellen von neuen Kanllisten (w_scan) um einen Patch erweitert, der helfen kann, diese Sender auch zu finden, sofern die verwendete DVB Hardware dies unterstützt.
Dafür gibt es jetzt, nach installieren des scan Paketes, im Webif unter "TV / Scan-Channellist / DVB type" die Möglichkeit DVB-T2 auszuwählen. Leider ist das ganze Thema noch in der Entwicklung, weshalb es hier auszuprobieren gilt, ob der DVB-T oder DVB-T2 Scan mehr Erfolg bringt, oder ob anschließend beide Scan Ergebnisse manuell zusammen geführt werden müssen.

Den DVB-T2 Scan habe ich, aufgrund fehlender Hardware, selber nicht testen können.

Claus
« Last Edit: March 04, 2017, 13:24:13 by clausmuus »
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline mipi

  • Newbie
  • *
  • Posts: 28
    • View Profile
DVB-T2
« Reply #1 on: March 05, 2017, 10:06:05 »
Hallo,
ich habe gerade eine DVB-T2 Scan durchgeführt. Wie man im Log sieht, werden die DVB-T2-Sender gefunden, zu sehen ganz unten im Scan - es sind die "MEDIA BROADCAST" Sender.

Code: [Select]
w_scan -c DE -f t -Y -N -s S19E2 -E 0
w_scan version 20161022 (mighty-p patch version 2) (compiled for DVB API 5.10)
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Silicon Labs Si2168": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.10
frontend 'Silicon Labs Si2168' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (55.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:00.120)         signal ok: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:514)
-/|        QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:514) : updating network_id -> (0:12290:514)
482000: (time: 00:07.810) -/
490000: (time: 00:09.830) |
498000: (time: 00:11.839) -
506000: (time: 00:13.859) /|
514000: (time: 00:15.880) 522000: (time: 00:17.899) -/
530000: (time: 00:19.920) |
538000: (time: 00:21.929) -
546000: (time: 00:23.949)         signal ok: QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:514)
/|WARNING: received garbage data: crc = 0x00ed94c3; expected crc = 0x24a48549
increasing filter timeout to 42 secs (pid:16 table_id:64 table_id_ext:-1).
-/|-/|WARNING: received garbage data: crc = 0xeb46eb53; expected crc = 0x9ea48549
-/|-/WARNING: received garbage data: crc = 0x6f066499; expected crc = 0x9ea48549
|-/|-/|-/|-/|        Info: no data from NIT(actual )after 42 seconds
554000: (time: 01:07.260) -
562000: (time: 01:09.290) /|
570000: (time: 01:11.299)
578000: (time: 01:11.829) -
586000: (time: 01:13.849) /|
594000: (time: 01:15.870) 602000: (time: 01:17.890) -
610000: (time: 01:18.359) /
618000: (time: 01:20.379) |        signal ok: QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999 (0:0:0)
 Info: no data from PAT after 2 seconds
deleting (QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999 (0:0:0))
626000: (time: 01:23.280) -/
634000: (time: 01:25.299) |642000: (time: 01:27.319) -
650000: (time: 01:29.340) /|
658000: (time: 01:31.370)         signal ok: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14608)
 QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:14608) : updating network_id -> (0:12345:14608)
666000: (time: 01:33.159) -/
674000: (time: 01:35.189) |682000: (time: 01:37.209) -
690000: (time: 01:39.239) /|
698000: (time: 01:41.250)         signal ok: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14593)
-/|        QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:14593) : updating network_id -> (0:12345:14593)
706000: (time: 01:48.049) -/
714000: (time: 01:50.069) |722000: (time: 01:52.090)         signal ok: QAM_AUTO f = 722000 kHz I999B8C999D999T999G999Y999 (0:0:0)
-/        Info: no data from PAT after 2 seconds
deleting (QAM_AUTO f = 722000 kHz I999B8C999D999T999G999Y999 (0:0:0))
730000: (time: 01:55.269) |738000: (time: 01:57.290) -
746000: (time: 01:59.319) /|
754000: (time: 02:01.340) -
762000: (time: 02:03.349)         signal ok: QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14337)
/|-/|        QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:14337) : updating network_id -> (0:12344:14337)
770000: (time: 02:11.009) 778000: (time: 02:13.020) -/
786000: (time: 02:15.030)         signal ok: QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14337)
|-/        QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:14337) : updating network_id -> (0:12344:14337)
794000: (time: 02:19.689) |
802000: (time: 02:21.719) -
810000: (time: 02:23.729) /
818000: (time: 02:25.759) |826000: (time: 02:27.770) -/
834000: (time: 02:29.789) |
842000: (time: 02:31.810) -
850000: (time: 02:33.830) /
858000: (time: 02:35.860) |Scanning DVB-T2...
474000: (time: 02:37.879) -
482000: (time: 02:39.909) /|
490000: (time: 02:41.939) -
498000: (time: 02:43.960) /
506000: (time: 02:45.990) |514000: (time: 02:48.000) -
522000: (time: 02:50.009) /|
530000: (time: 02:52.020) -
538000: (time: 02:54.030) /
546000: (time: 02:56.060) |554000: (time: 02:58.069) -/
562000: (time: 03:00.090) |
570000: (time: 03:02.120) -
578000: (time: 03:04.139) /
586000: (time: 03:06.150) |        signal ok: QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:16481)
QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) : updating network_id -> (0:12352:16481)
594000: (time: 03:07.129) -
602000: (time: 03:09.150) /
610000: (time: 03:11.210) |618000: (time: 03:13.219) -
626000: (time: 03:15.250) /|
634000: (time: 03:17.270) -
642000: (time: 03:19.289) /
650000: (time: 03:21.319) |658000: (time: 03:23.330) -
666000: (time: 03:25.340) /|
674000: (time: 03:27.370) -
682000: (time: 03:29.379) /
690000: (time: 03:31.389) |698000: (time: 03:33.400) -/
706000: (time: 03:35.449) |
714000: (time: 03:37.479) -
722000: (time: 03:39.509) /
730000: (time: 03:41.539) |738000: (time: 03:43.550) -/
746000: (time: 03:45.610) |
754000: (time: 03:47.629) -
762000: (time: 03:49.659) /|
770000: (time: 03:51.680) 778000: (time: 03:53.740)
786000: (time: 03:54.159) -/
794000: (time: 03:56.189) |802000: (time: 03:58.219) -
810000: (time: 04:00.240) /|
818000: (time: 04:02.270) -
826000: (time: 04:04.289) /
834000: (time: 04:06.330) |842000: (time: 04:08.340) -
850000: (time: 04:10.360) /|
858000: (time: 04:12.370) tune to: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:12290:514) (time: 04:14.379)
- service = ZDF (ZDFmobil)
service = 3sat (ZDFmobil)
service = ZDFinfo (ZDFmobil)
service = neo/KiKA (ZDFmobil)
/|-/|-/|tune to: QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:514) (time: 04:28.269)
WARNING: received garbage data: crc = 0xb932787d; expected crc = 0xf4419744
increasing filter timeout to 31 secs (pid:544 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0xaa5bee0a; expected crc = 0xaa389a26
increasing filter timeout to 31 secs (pid:592 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0x4f606917; expected crc = 0xd5a79c21
increasing filter timeout to 31 secs (pid:576 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0x8f94994f; expected crc = 0x9f930e2d
increasing filter timeout to 32 secs (pid:17 table_id:66 table_id_ext:-1).
WARNING: received garbage data: crc = 0xbd34f603; expected crc = 0xd5a73421
WARNING: received garbage data: crc = 0x51c449de; expected crc = 0x449fb902
increasing filter timeout to 31 secs (pid:560 table_id:2 table_id_ext:-1).
-WARNING: received garbage data: crc = 0x729fa22f; expected crc = 0xd5a79c21
WARNING: received garbage data: crc = 0x5fe9326d; expected crc = 0x449f8107
WARNING: received garbage data: crc = 0x064e772b; expected crc = 0x45080118
WARNING: received garbage data: crc = 0x2c8034bb; expected crc = 0x30010356
WARNING: received garbage data: crc = 0x83d0ac15; expected crc = 0xd5a73421
/ service = ZDF (ZDFmobil)
service = 3sat (ZDFmobil)
service = ZDFinfo (ZDFmobil)
service = neo/KiKA (ZDFmobil)
|-/|WARNING: received garbage data: crc = 0xe72f4451; expected crc = 0x9ea48549
increasing filter timeout to 42 secs (pid:16 table_id:64 table_id_ext:-1).
-/|-/|-/|-/|-/|-        QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:514) : updating network_id -> (0:12290:514)
tune to: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:12345:14608) (time: 05:05.800)
service = Bayerisches FS (SWR)
service = hr-fernsehen (SWR)
service = SWR Fernsehen RP (SWR)
service = WDR Fernsehen (SWR)
/|-        already known: (QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:12345:14593)), but not found by pids
/|-/|tune to: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:12345:14593) (time: 05:20.259)
- service = Bayerisches FS (SWR)
service = hr-fernsehen (SWR)
service = SWR Fernsehen BW (SWR)
service = WDR Fernsehen (SWR)
/|-/|-/|tune to: QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:12344:14337) (time: 05:34.259)
service = arte (SWR)
service = Phoenix (SWR)
service = ONE (SWR)
service = Das Erste (SWR)
-/|-/|-/|tune to: QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16481) (time: 05:48.269)
service = Das Erste HD (MEDIA BROADCAST)
service = ZDF HD (MEDIA BROADCAST)
service = RTL HD (MEDIA BROADCAST)
service = Pro7 HD (MEDIA BROADCAST)
service = SAT.1 HD (MEDIA BROADCAST)
service = VOX HD (MEDIA BROADCAST)
-/|-/|-(time: 06:02.269) dumping lists (18 services)
..
Done, scan time: 06:02.279
/|-/|-/|-/Starting VDR

Und hier ist die resultierende channel.conf. Da ich den Scan so konfiguriert hatte, dass nur freie Sender gesucht werden sollten, sind Das Erste und ZDF als einzige DVB-T2-Sender übernommen worden. Die restlichen Sender sind DVB-T-Sender.

Code: [Select]
:->favoriten
Das Erste HD;MEDIA BROADCAST:586000:B8S1P0:T:27500:1361=36:1362=deu@15,1363=mis@4:1366:0:769:0:16481:0
ZDF HD;MEDIA BROADCAST:586000:B8S1P0:T:27500:1377=36:0;1378=@106:1382:0:16961:0:16481:0
arte;SWR:762000:B8:T:27500:513=2:514=deu@3,515=fra@4:516:0:2:0:14337:0
ZDFinfo;ZDFmobil:474000:B8:T:27500:577=2:578=deu@3:583:0:516:0:514:0
3sat;ZDFmobil:474000:B8:T:27500:561=2:562=deu@3,563=mis@4:567:0:515:0:514:0
:->news
Phoenix;SWR:762000:B8:T:27500:769=2:770=deu@3:772:0:3:0:14337:0
:->regional programme
hr-fernsehen;SWR:658000:B8:T:27500:513=2:514=deu@3:516:0:65:0:14608:0
hr-fernsehen;SWR:698000:B8:T:27500:513=2:514=deu@3:516:0:65:0:14593:0
SWR Fernsehen BW;SWR:698000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:225:0:14593:0
SWR Fernsehen RP;SWR:658000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:226:0:14608:0
:->andere
ZDF;ZDFmobil:474000:B8:T:27500:545=2:546=deu@3,547=mis@4:551:0:514:0:514:0
neo/KiKA;ZDFmobil:474000:B8:T:27500:593=2:594=deu@3:599:0:517:0:514:0
Bayerisches FS;SWR:658000:B8:T:27500:1025=2:1026=deu@3:1028:0:34:0:14608:0
WDR Fernsehen;SWR:658000:B8:T:27500:769=2:770=deu@3:772:0:262:0:14608:0
Bayerisches FS;SWR:698000:B8:T:27500:1025=2:1026=deu@3:1028:0:34:0:14593:0
WDR Fernsehen;SWR:698000:B8:T:27500:769=2:770=deu@3:772:0:262:0:14593:0
ONE;SWR:762000:B8:T:27500:1025=2:1026=deu@3:1028:0:6:0:14337:0
Das Erste;SWR:762000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:224:0:14337:0

Startet man den Scan mit der Einstellung "DVB-T2", bekommt man also als Ergebnis eine kombinierte Liste aus DVB-T2 und DVB-T Sendern.

mipi

Offline Holger

  • Expert Member
  • *****
  • Posts: 835
    • View Profile
DVB-T2
« Reply #2 on: March 17, 2017, 17:49:56 »
Hi,
meine neue Hauppauge WinTV-quadHD für DVB-T2 wird leider noch nicht erkannt (unter MLD 5.1, Standard DVB-Treiber)

dmesg meldet:
Code: [Select]
[    4.911143] cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa5200000
[    4.911756] cx23885[1]: Your board isn't known (yet) to the driver.
[    4.911756] cx23885[1]: Try to pick one of the existing card configs via
[    4.911756] cx23885[1]: card=<n> insmod option.  Updating to the latest
[    4.911756] cx23885[1]: version might help as well.
[    4.911765] cx23885[1]: Here is a list of valid choices for the card=<n> insmod option:
[    4.911768] cx23885[1]:    card=0 -> UNKNOWN/GENERIC
[    4.911771] cx23885[1]:    card=1 -> Hauppauge WinTV-HVR1800lp
[    4.911774] cx23885[1]:    card=2 -> Hauppauge WinTV-HVR1800
[    4.911777] cx23885[1]:    card=3 -> Hauppauge WinTV-HVR1250
[    4.911780] cx23885[1]:    card=4 -> DViCO FusionHDTV5 Express
[    4.911783] cx23885[1]:    card=5 -> Hauppauge WinTV-HVR1500Q
[    4.911790] cx23885[1]:    card=6 -> Hauppauge WinTV-HVR1500
[    4.911793] cx23885[1]:    card=7 -> Hauppauge WinTV-HVR1200
[    4.911796] cx23885[1]:    card=8 -> Hauppauge WinTV-HVR1700
[    4.911800] cx23885[1]:    card=9 -> Hauppauge WinTV-HVR1400
[    4.911803] cx23885[1]:    card=10 -> DViCO FusionHDTV7 Dual Express
[    4.911806] cx23885[1]:    card=11 -> DViCO FusionHDTV DVB-T Dual Express
[    4.911809] cx23885[1]:    card=12 -> Leadtek Winfast PxDVR3200 H
[    4.911812] cx23885[1]:    card=13 -> Compro VideoMate E650F
[    4.911815] cx23885[1]:    card=14 -> TurboSight TBS 6920
[    4.911818] cx23885[1]:    card=15 -> TeVii S470
[    4.911822] cx23885[1]:    card=16 -> DVBWorld DVB-S2 2005
[    4.911825] cx23885[1]:    card=17 -> NetUP Dual DVB-S2 CI
[    4.911828] cx23885[1]:    card=18 -> Hauppauge WinTV-HVR1270
[    4.911831] cx23885[1]:    card=19 -> Hauppauge WinTV-HVR1275
[    4.911834] cx23885[1]:    card=20 -> Hauppauge WinTV-HVR1255
[    4.911857] cx23885[1]:    card=21 -> Hauppauge WinTV-HVR1210
[    4.911860] cx23885[1]:    card=22 -> Mygica X8506 DMB-TH
[    4.911864] cx23885[1]:    card=23 -> Magic-Pro ProHDTV Extreme 2
[    4.911867] cx23885[1]:    card=24 -> Hauppauge WinTV-HVR1850
[    4.911870] cx23885[1]:    card=25 -> Compro VideoMate E800
[    4.911873] cx23885[1]:    card=26 -> Hauppauge WinTV-HVR1290
[    4.911876] cx23885[1]:    card=27 -> Mygica X8558 PRO DMB-TH
[    4.911880] cx23885[1]:    card=28 -> LEADTEK WinFast PxTV1200
[    4.911883] cx23885[1]:    card=29 -> GoTView X5 3D Hybrid
[    4.911886] cx23885[1]:    card=30 -> NetUP Dual DVB-T/C-CI RF
[    4.911889] cx23885[1]:    card=31 -> Leadtek Winfast PxDVR3200 H XC4000
[    4.911892] cx23885[1]:    card=32 -> MPX-885
[    4.911896] cx23885[1]:    card=33 -> Mygica X8502/X8507 ISDB-T
[    4.911899] cx23885[1]:    card=34 -> TerraTec Cinergy T PCIe Dual
[    4.911902] cx23885[1]:    card=35 -> TeVii S471
[    4.911905] cx23885[1]:    card=36 -> Hauppauge WinTV-HVR1255
[    4.911908] cx23885[1]:    card=37 -> Prof Revolution DVB-S2 8000
[    4.911911] cx23885[1]:    card=38 -> Hauppauge WinTV-HVR4400/HVR5500
[    4.911914] cx23885[1]:    card=39 -> AVerTV Hybrid Express Slim HC81R
[    4.911917] cx23885[1]:    card=40 -> TurboSight TBS 6981
[    4.911920] cx23885[1]:    card=41 -> TurboSight TBS 6980
[    4.911923] cx23885[1]:    card=42 -> Leadtek Winfast PxPVR2200
[    4.911927] cx23885[1]:    card=43 -> Hauppauge ImpactVCB-e
[    4.911930] cx23885[1]:    card=44 -> DViCO FusionHDTV DVB-T Dual Express2
[    4.911933] cx23885[1]:    card=45 -> DVBSky T9580
[    4.911936] cx23885[1]:    card=46 -> DVBSky T980C
[    4.911939] cx23885[1]:    card=47 -> DVBSky S950C
[    4.911942] cx23885[1]:    card=48 -> Technotrend TT-budget CT2-4500 CI
[    4.911945] cx23885[1]:    card=49 -> DVBSky S950
[    4.911948] cx23885[1]:    card=50 -> DVBSky S952
[    4.911951] cx23885[1]:    card=51 -> DVBSky T982
[    4.911954] cx23885[1]:    card=52 -> Hauppauge WinTV-HVR5525
[    4.911957] cx23885[1]:    card=53 -> Hauppauge WinTV Starburst
[    4.914390] CORE cx23885[1]: subsystem: 0070:6b28, board: UNKNOWN/GENERIC [card=0,autodetected]
[    5.046207] cx23885_dev_checkrevision() Hardware revision = 0xa4
[    5.046220] cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 16, latency: 0, mmio: 0xa5000000

-Was müsste ich eingeben, um dies zu testen:
 Try to pick one of the existing card configs via card=<n> insmod option.   ?

-Ist der Treiber unter MLD 5.3 schon integriert ?

- oder den DVB-MBE-Treiber nehmen ?

- welche Informationen werden benötigt, um das entsprechende Modul einzubinden ?

Beste Grüße
Holger
« Last Edit: March 17, 2017, 17:55:03 by Holger »
Spoiler (show / hide)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #3 on: March 17, 2017, 18:48:59 »
Hi,

die meisten Karten werden derzeit vom dvb-mb Treiber der MLD-5.3 unterstützt.
Und auch nur das scan Paket der MLD-5.3 kann DVB-T2 Sender finden.

Claus
« Last Edit: March 17, 2017, 19:22:19 by P3f »
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Holger

  • Expert Member
  • *****
  • Posts: 835
    • View Profile
DVB-T2
« Reply #4 on: March 18, 2017, 16:50:22 »
Hi,
unter MLD 5.3 wird die Hauppauge WinTV-quadHD auch mit dem Standard-DVB-Treiber erkannt, perfekt !

Dann werde ich mich als nächstes mit wscan für DVB-T2-Sender beschäftigen...

Vielen Dank an dieser Stelle auch mal wieder für Euren tollen Einsatz für die MLD-Gemeinde !

Beste Grüße
Holger
Spoiler (show / hide)

Offline Holger

  • Expert Member
  • *****
  • Posts: 835
    • View Profile
DVB-T2
« Reply #5 on: April 02, 2017, 16:13:41 »
Moin,

ich habe den DVB-T2-Scan unter MLD 5.3 laufen gelassen (nur frei empfangbare Sender) und es wurden diverse Kanäle
gefunden. Aber das Bild bleibt schwarz, wenn ich auf einen DVB-T2-Sender umschalte. Fehlt dann ein Treiber,
entsprechende Firmware oder kann die Empfangskarte (Hauppauge WinTV-quad HD bzw. TT CT2-4500)
das Signal nicht dekodieren ?

Gruß
Holger
Spoiler (show / hide)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #6 on: April 02, 2017, 18:48:40 »
Hi,

damit der Empfang von DVB-T2 Sendern funktioniert, muss der verwendete DVB Empfänger dies unterstützen. Ob ein Scan auf DVB-T2 Sender mit ungeeigneter Hardware funktioniert und eine Senderliste liefert, habe ich bisher nicht ausprobiert.
Problematisch ist es bereits, wenn Du mehrere DVB Karten verwendest, und lediglich eine kein DVB-T2 kann, denn möglicherweise wird gerade diese für die DVB-T2 Wiedergabe ausgewählt, was dann zu Fehlern führt. Genaueres weiß ich dazu aber nicht, da ich selber keine DVB-T2 geeignete Hardware habe, und das ganze deshalb auch noch nicht getestet habe.
Ein weiteres Problem könnte sein, das Dein übriges System nicht leistungsstark genug ist, um DVB-T2 Sender auszugeben. Dafür brauchst Du entweder einen sehr schnallen Prozessor, oder eine moderne Grafikkarte, die dies bereits über nehmen kann.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Holger

  • Expert Member
  • *****
  • Posts: 835
    • View Profile
DVB-T2
« Reply #7 on: April 02, 2017, 22:01:06 »
Hallo Claus,

HEVC wird wohl erst mit vdr 2.3.2 unterstützt, da muss ich also noch warten...
Quote
http://www.vdr-wiki.de/wiki/index.php/VDR_mit_DVB-T2_zu_Fuss

Grundsätzlich werden die gefundenen DVB-T2-Sender empfangen, wenn ich unter Windows per kodi auf die MLD zugreife,
bekomme ich ein Bild !

Holger
Spoiler (show / hide)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #8 on: April 02, 2017, 22:51:06 »
Hi,

wir haben schon seit einigen Monaten alles nötige für DVB-T2 mit dabei. Nur testen konnte ich das selber noch nicht, mangels fehlender DVB-T2 Hardware.

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Holger

  • Expert Member
  • *****
  • Posts: 835
    • View Profile
DVB-T2
« Reply #9 on: April 05, 2017, 19:48:50 »
Hast Du einen PC mit einem freien PCI-Express x1-Slot ?

Dann würde ich Dir statt einer Post- eine DVB-T2-Karte zukommen lassen  :)

Holger
« Last Edit: April 05, 2017, 19:54:24 by Holger »
Spoiler (show / hide)

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #10 on: April 05, 2017, 22:22:10 »
Hi,

Danke für das Angebot. Aber das hilft mir derzeit nur bedingt weiter, da mein Media PC mit  PCI-Express Steckplätzen zu leistundsschwach ist, um dvb-t2 Sender zu dekodieren. Ich könnte damit also lediglich den Scan und Empfang testen.
Ich verlasse mich also vorerst auf die Tests von MegaX :)

Claus
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #11 on: April 06, 2017, 08:33:42 »
OK, aufgrund einer Diskussion in unser Entwickler Runde muss ich meine Aussage bezüglich DVB-T2 Unterstützung revidieren. Ich hatte da wohl ein paar aussagen falsch verstanden, bzw. falsch in Erinnerung.
Lediglich der Empfang und das Streamen von DVB-T2 funktioniert schon länger. Das Scannen von DVB-T2 Sendern ist bisher ein wenig Glückssache. Es kommt durchaus vor, das nicht alle DVB-T2 Sender gefunden werden.
Die Ausgabe von DVB-T2 Funktioniert erst mit der MLD-5.4 und nur mit dem softhddevice oder xineliboutput Paket.

Claus
« Last Edit: April 07, 2017, 09:43:21 by clausmuus »
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Antonius

  • Member
  • **
  • Posts: 87
    • View Profile
DVB-T2
« Reply #12 on: January 04, 2019, 16:46:37 »
Hi,

ich versuche gerade DVB-T2 mld MLD 5.4 stable zum Laufen zu bringen. Ich verwende eine Hauppauge WinTV-dualHD. Die Kanalsuche findet keine Sender. Habt ihr eine Idee?

Code: [Select]
Stopping vdr
done
w_scan -c DE -f t -Y -N -E 0
w_scan version 20170107 (mighty-p patch version 2) (compiled for DVB API 5.10)
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> "Montage Technology M88DS3103" doesnt support TERRESTRIAL -> SEARCH NEXT ONE.
/dev/dvb/adapter1/frontend0 -> "Montage Technology M88DS3103" doesnt support TERRESTRIAL -> SEARCH NEXT ONE.
/dev/dvb/adapter2/frontend0 -> TERRESTRIAL "Silicon Labs Si2168": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter2/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'Silicon Labs Si2168' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (42.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:00.501) -
482000: (time: 00:02.542) /|
490000: (time: 00:04.587) -
498000: (time: 00:06.635) /|
506000: (time: 00:08.674) -
514000: (time: 00:10.721) /|
522000: (time: 00:12.760) -
530000: (time: 00:14.800) /|
538000: (time: 00:16.839) -
546000: (time: 00:18.877) /|
554000: (time: 00:20.919) -
562000: (time: 00:22.967) /|
570000: (time: 00:25.007) -
578000: (time: 00:27.051) /|
586000: (time: 00:29.098) -
594000: (time: 00:31.138) /|
602000: (time: 00:33.186) -
610000: (time: 00:35.234) /|
618000: (time: 00:37.273) -
626000: (time: 00:39.311) /|
634000: (time: 00:41.350) -
642000: (time: 00:43.389) /|
650000: (time: 00:45.432) -/|
658000: (time: 00:49.969) -
666000: (time: 00:52.015) /|
674000: (time: 00:54.059) -
682000: (time: 00:56.107) /|
690000: (time: 00:58.156) -
698000: (time: 01:00.203) /|
706000: (time: 01:02.250) -
714000: (time: 01:04.298) /|
722000: (time: 01:06.346) -
730000: (time: 01:08.394) /|
738000: (time: 01:10.442) -
746000: (time: 01:12.490) /|
754000: (time: 01:14.529) -
762000: (time: 01:16.568) /|
770000: (time: 01:18.607) -/|778000: (time: 01:23.502) -/
786000: (time: 01:25.546) |794000: (time: 01:27.594) -/
802000: (time: 01:29.635) |810000: (time: 01:31.682) -/
818000: (time: 01:33.730) |826000: (time: 01:35.777) -/
834000: (time: 01:37.816) |842000: (time: 01:39.855) -/
850000: (time: 01:41.894) |858000: (time: 01:43.933) -/
Scanning DVB-T2...
474000: (time: 01:45.975) |482000: (time: 01:48.016) -        signal ok: QAM_AUTO f = 482000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 482000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:16481)
/|-/        QAM_AUTO f = 482000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) : updating network_id -> (0:12352:16481)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16481)) 0x0000
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)) 0x4004
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481) : updating tp ids -> (8468:12352:16497)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16497)) 0x4004
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)) 0x4004
490000: (time: 01:54.082) |498000: (time: 01:56.130) -/
506000: (time: 01:58.179) |514000: (time: 02:00.227) -/
522000: (time: 02:02.274) |530000: (time: 02:04.323) -/
538000: (time: 02:06.371) |        signal ok: QAM_AUTO f = 538000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 538000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:2562)
-/        QAM_AUTO f = 538000 kHz I999B8C999D999T999G999Y999P0 (0:0:2562) : updating network_id -> (0:12298:2562)
updating transponder:
(QAM_AUTO f = 538000 kHz I999B8C999D999T999G999Y999P0 (0:12298:2562)) 0x0000
to (QAM_AUTO f = 538000 kHz I999B8C999D0T16G19128Y0P1 (8468:12298:2562)) 0x4004
546000: (time: 02:10.059) |554000: (time: 02:12.098) -/
562000: (time: 02:14.139) |570000: (time: 02:16.186) -/
578000: (time: 02:18.233) |586000: (time: 02:20.280)         signal ok: QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:515)
-/|-        QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:515) : updating network_id -> (0:12290:515)
updating transponder:
(QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:12290:515)) 0x0000
to (QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P0 (8468:12290:515)) 0x4004
594000: (time: 02:25.166) /|
602000: (time: 02:27.205) -
610000: (time: 02:29.244) /|
618000: (time: 02:31.289) -
626000: (time: 02:33.337) /|
634000: (time: 02:35.384) -
642000: (time: 02:37.433)         signal ok: QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:16387)
/|-/        QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:0:16387) : updating network_id -> (0:12352:16387)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497) : updating tp ids -> (8468:12352:16481)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16481)) 0x4004
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)) 0x4004
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P0 (8468:12290:515)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P0 (8468:12290:515) : updating tp ids -> (8468:12352:16498)
updating transponder:
(QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P0 (8468:12352:16498)) 0x4004
to (QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P1 (8468:12352:16498)) 0x4004
updating transponder:
(QAM_AUTO f = 642000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16387)) 0x0000
to (QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387)) 0x4004
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P1 (8468:12352:16498)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P1 (8468:12352:16498) : updating tp ids -> (8468:12352:16390)
updating transponder:
(QAM_AUTO f = 586000 kHz I999B8C999D0T16G19128Y0P1 (8468:12352:16390)) 0x4004
to (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390)) 0x4004
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390) : updating tp ids -> (8468:12352:16392)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481) : updating tp ids -> (8468:12352:16497)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16497)) 0x4004
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)) 0x4004
650000: (time: 02:42.826) |658000: (time: 02:44.864) -/
666000: (time: 02:46.905) |674000: (time: 02:48.954)         signal ok: QAM_AUTO f = 674000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
-        QAM_AUTO f = 674000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:6146)
QAM_AUTO f = 674000 kHz I999B8C999D999T999G999Y999P0 (0:0:6146) : updating network_id -> (0:12312:6146)
updating transponder:
(QAM_AUTO f = 674000 kHz I999B8C999D999T999G999Y999P0 (0:12312:6146)) 0x0000
to (QAM_AUTO f = 674000 kHz I999B8C999D0T16G19128Y0P1 (8468:12312:6146)) 0x4004
682000: (time: 02:50.261) /|
690000: (time: 02:52.300)         signal ok: QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:16435)
-/|-/|        QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999P0 (0:0:16435) : updating network_id -> (0:12352:16435)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497) : updating tp ids -> (8468:12352:16481)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16481)) 0x4004
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)) 0x4004
already known: (QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387)), but not found by pids
QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387) : updating tp ids -> (8468:12352:16386)
already known: (QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16386)), but not found by pids
QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16386) : updating tp ids -> (8468:12352:16387)
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16392)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16392) : updating tp ids -> (8468:12352:16390)
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390) : updating tp ids -> (8468:12352:16392)
updating transponder:
(QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16435)) 0x0000
to (QAM_AUTO f = 690000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16435)) 0x4004
already known: (QAM_AUTO f = 690000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16435)), but not found by pids
QAM_AUTO f = 690000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16435) : updating tp ids -> (8468:12352:16438)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481) : updating tp ids -> (8468:12352:16497)
updating transponder:
(QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16497)) 0x4004
to (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)) 0x4004
698000: (time: 03:00.262) -
706000: (time: 03:02.308) /|
714000: (time: 03:04.354) -
722000: (time: 03:06.402) /|
730000: (time: 03:08.450) -
738000: (time: 03:10.497) /|
746000: (time: 03:12.547)         signal ok: QAM_AUTO f = 746000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 746000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:5122)
-/|        QAM_AUTO f = 746000 kHz I999B8C999D999T999G999Y999P0 (0:0:5122) : updating network_id -> (0:12308:5122)
updating transponder:
(QAM_AUTO f = 746000 kHz I999B8C999D999T999G999Y999P0 (0:12308:5122)) 0x0000
to (QAM_AUTO f = 746000 kHz I999B8C999D0T16G19128Y0P1 (8468:12308:5122)) 0x4004
754000: (time: 03:16.292) -
762000: (time: 03:18.331) /|
770000: (time: 03:20.379) -
778000: (time: 03:22.424) /|
786000: (time: 03:24.473) -
794000: (time: 03:26.519) /|
802000: (time: 03:28.568) -
810000: (time: 03:30.617) /|
818000: (time: 03:32.665) -
826000: (time: 03:34.712) /|
834000: (time: 03:36.761) -
842000: (time: 03:38.809) /|
850000: (time: 03:40.857) -
858000: (time: 03:42.904) /|
tune to: QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497) (time: 03:44.953)
service = ssu (Harmonic)
service = Infokanal (MEDIA BROADCAST)
-/|        already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16497) : updating tp ids -> (8468:12352:16481)
already known: (QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387)), but not found by pids
QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387) : updating tp ids -> (8468:12352:16386)
already known: (QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16386)), but not found by pids
QAM_AUTO f = 642000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16386) : updating tp ids -> (8468:12352:16387)
already known: (QAM_AUTO f = 746000 kHz I999B8C999D0T16G19128Y0P1 (8468:12308:5122)), but not found by pids
QAM_AUTO f = 746000 kHz I999B8C999D0T16G19128Y0P1 (8468:12308:5122) : updating tp ids -> (8468:12352:16388)
updating transponder:
(QAM_AUTO f = 746000 kHz I999B8C999D0T16G19128Y0P1 (8468:12352:16388)) 0x4004
to (QAM_AUTO f = 746000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16388)) 0x4004
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16392)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16392) : updating tp ids -> (8468:12352:16390)
already known: (QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390)), but not found by pids
QAM_AUTO f = 586000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16390) : updating tp ids -> (8468:12352:16392)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16481)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16481) : updating tp ids -> (8468:12352:16434)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16434)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16434) : updating tp ids -> (8468:12352:16435)
already known: (QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16435)), but not found by pids
QAM_AUTO f = 482000 kHz I999B8C999D0T32G16Y0P1 (8468:12352:16435) : updating tp ids -> (8468:12352:16497)
-/|-/|-tune to: QAM_AUTO f = 538000 kHz I999B8C999D0T16G19128Y0P1 (8468:12298:2562) (time: 03:59.876)
/|-/----------no signal----------
tune to: QAM_AUTO f = 538000 kHz I999B8C999D0T999G999Y0P1 (8468:12298:2562) (time: 04:04.262)  (no signal)
|-/----------no signal----------
|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|-/|Killed
-Starting vdr
done

Erzeugt wird eine leere Datei "DVB-t-scanned.conf", ansonsten ändert sich nichts im Verzeichnis /etc/vdr/channels.

Viele Grüße
Sascha
MLD 5.4 stable - Fujitsu P556 (Intel G4400) / 4GB RAM / 4TB HDD / DVBSky S952 V3 Dual DVB-S2 / lirc IgorUSB
MLD 5.4 stable - Intel NUC5CPYH / 4GB RAM / 1TB HDD / 2x DVBSky S960 DVB-S2 USB / rc_core
MLD 5.3 stable - Raspberry PI2

Online clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20121
    • View Profile
    • ClausMuus.de
DVB-T2
« Reply #13 on: January 07, 2019, 17:14:58 »
In der aktuellen unstable MLD-5.4 wird ein anderes Tool (t2scan) verwendet. Das funktioniert bei mir zwar noch nicht zuverlässig, findet aber im schnitt jedes Zweite mal alle Sender. Ich bin derzeit mit dem Entwickler des Tools in Kontakt um die Ursache des Problems zu finden.
Das bei Dir verwendete Tool w_scan kann DVB-T2 Sender nur selten finden, ist dafür also nicht geeignet.
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Antonius

  • Member
  • **
  • Posts: 87
    • View Profile
DVB-T2
« Reply #14 on: January 07, 2019, 21:09:51 »
Hi Claus,

prima. das funktioniert mit der MLD 5.4 unstable. Hat bei mir im ersten Anlauf eine Kanalliste erzeugt.
Kann ich diese für die Allgemeinheit zur Verfügung stellen?

Viele Grüße
Sascha
MLD 5.4 stable - Fujitsu P556 (Intel G4400) / 4GB RAM / 4TB HDD / DVBSky S952 V3 Dual DVB-S2 / lirc IgorUSB
MLD 5.4 stable - Intel NUC5CPYH / 4GB RAM / 1TB HDD / 2x DVBSky S960 DVB-S2 USB / rc_core
MLD 5.3 stable - Raspberry PI2

[1] 2 >>> MLD-5.x / General / DVB-T2
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.