Hallo Carsten der Große,
in der modules ist noch coretemp eingetragen. Sensors bringt:
MLD> sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +33.0°C (high = +76.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +76.0°C, crit = +100.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.22 V (min = +0.00 V, max = +1.74 V)
in1: +1.82 V (min = +1.70 V, max = +0.55 V) ALARM
AVCC: +3.36 V (min = +0.11 V, max = +0.42 V) ALARM
+3.3V: +3.36 V (min = +3.47 V, max = +1.82 V) ALARM
in4: +1.19 V (min = +0.82 V, max = +0.25 V) ALARM
in5: +1.62 V (min = +0.51 V, max = +0.53 V) ALARM
in6: +1.04 V (min = +0.74 V, max = +1.82 V)
3VSB: +3.42 V (min = +3.25 V, max = +2.85 V) ALARM
Vbat: +3.36 V (min = +1.58 V, max = +2.19 V) ALARM
fan1: 2518 RPM (min = 1406 RPM, div = 4)
fan2: 466 RPM (min = 1875 RPM, div = 16) ALARM
fan3: 0 RPM (min = 21093 RPM, div = 8) ALARM
fan4: 0 RPM (min = 8231 RPM, div = 4) ALARM
fan5: 0 RPM (min = 67500 RPM, div = 4) ALARM
temp1: +39.0°C (high = +121.0°C, hyst = -13.0°C) sensor = thermistor
temp2: +31.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU diode
temp3: +21.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU diode
cpu0_vid: +0.000 V
intrusion0: OK
nun ist alles wieder da.
modprobe ....... w83627ehf.ko ist ohne Fehler.
Die Fehlermeldung:
(kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
ist weg.
Der sche... atk0110 wird nicht mehr gestartet.
In der Sysinit erscheint als einzige Fehlermeldung:
Mar 8 15:09:24 (MLD) user.err kernel: asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
Ich werde das so lassen und einen Langzeittest machen.
Gruß Gerhard