Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Bernd

1
Entwicklung [ Development ] / Neue Dvb Treiber
« on: February 16, 2012, 09:47:44 »
Nur zur Info: Ich hatte vorher Verzögerungen im Ton sowie ab und an Artefakte. Jetzt läuft der Treiber super. Danke

2
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: February 04, 2012, 13:40:31 »
Konsole kann ich umschalten

3
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: February 03, 2012, 19:27:50 »
Nein funktioniert nicht.  TV läuft weiter Tastatur reagiert nicht mehr. In der Message Log steht auch nix. Wie oben beschrieben.

4
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: February 02, 2012, 20:25:09 »
die nachfrage kam auch. ich glaube ich musste zweimal mit return bestätigen. eben nochmal versucht manuell zu installieren. kann leider nicht immer und immer wieder installieren, da mir meine Frau sonst den Kopf abreist :)  

5
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 18, 2012, 21:12:22 »
Einstellung vor der Installation hab ich nur gemacht um die ganze Angelegenheit zu loggen. Der Fehler oder Abbruch kommt auch ohne das ich irgendwas anderes mache. Also CD rein und booten, dann den Installer aufrufe. Automatisch und per WebIF funktioniert es ja. Halt nur manuell via OSD nicht. Vielleicht liegt es ja tatsächlich an IDE.  

6
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 18, 2012, 11:34:51 »
grün stellen mach ich gerne :-)

7
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 18, 2012, 11:12:37 »
@MarcMic:

Quote
hattest du da mit dvb_all gestartet oder sowas?

Der DVB Treiber steht doch immer auf "all" ?

Ich hab nur die CD eingelegt, gestartet, Sprache gewählt, Astra gewählt, Tastaturlayot beibehalten, Netzwerk konfiguriert, Samba installiert und versucht die manuelle Installation zu starten.

Ich meine aber das nach der Installation die "messages" nicht so voll ist.

Gruß Bernd

8
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 17, 2012, 21:22:39 »
Hi Pit, wenns hilft, die messages:

Quote
Jan 17 19:10:37 (none) syslog.info syslogd started: BusyBox v1.18.5
Jan 17 19:10:37 (none) user.warn kernel: aufs au_warn_loopback:111:loop0[2247]: you may want to try another patch for loopback file on iso9660(0x9660) branch
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2249]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2262]: uid/gid/perm /var/spool/apm.mnt/install 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2275]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2288]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2301]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2314]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2327]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2340]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2357]: uid/gid/perm /var/spool/apm.mnt/dvbsddevice 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2374]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/01777
Jan 17 19:10:55 (none) user.info kernel: Linux video capture interface: v2.00
Jan 17 19:10:55 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jan 17 19:10:55 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jan 17 19:10:55 (none) user.err kernel:  enough quality for its usage in production.
Jan 17 19:10:55 (none) user.err kernel:  Use it with care.
Jan 17 19:10:55 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan 17 19:10:55 (none) user.err kernel:  1a5cd29631a6b75e49e6ad8a770ab9d69cda0fa2 [media] tda10021: Add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel:  27d9a5e93842852c198aae9f45fd6c272bf2b374 [media] tda10021: Don't use a magic numbers for QAM modulation
Jan 17 19:10:55 (none) user.err kernel:  74b4576e63ec4cc765271db8815a42aa8f80ed14 [media] tda10023: add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jan 17 19:10:55 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jan 17 19:10:55 (none) user.err kernel:  enough quality for its usage in production.
Jan 17 19:10:55 (none) user.err kernel:  Use it with care.
Jan 17 19:10:55 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan 17 19:10:55 (none) user.err kernel:  1a5cd29631a6b75e49e6ad8a770ab9d69cda0fa2 [media] tda10021: Add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel:  27d9a5e93842852c198aae9f45fd6c272bf2b374 [media] tda10021: Don't use a magic numbers for QAM modulation
Jan 17 19:10:55 (none) user.err kernel:  74b4576e63ec4cc765271db8815a42aa8f80ed14 [media] tda10023: add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.info kernel: saa7146: register extension 'av7110'
Jan 17 19:10:55 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 6
Jan 17 19:10:55 (none) user.debug kernel: PCI: setting IRQ 6 as level-triggered
Jan 17 19:10:55 (none) user.info kernel: av7110 0000:01:09.0: PCI INT A -> Link[LNKF] -> GSI 6 (level, low) -> IRQ 6
Jan 17 19:10:55 (none) user.info kernel: saa7146: found saa7146 @ mem e0844000 (revision 1, irq 6) (0x13c2,0x0003)
Jan 17 19:10:55 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X)
Jan 17 19:10:55 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:21:d1:74
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fb2624
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Jan 17 19:10:58 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Jan 17 19:10:58 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Jan 17 19:10:58 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Jan 17 19:10:58 (none) user.info kernel: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/input/input1
Jan 17 19:10:58 (none) user.info kernel: dvb-ttpci: found av7110-0.
Jan 17 19:11:16 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:11:16 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
Jan 17 19:11:16 (none) user.debug kernel: PCI: setting IRQ 12 as level-triggered
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe09fe000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:11:26 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 20:11:59 (none) auth.info login[7797]: root login on 'tty1'
Jan 17 20:11:59 (none) auth.info login[7799]: root login on 'tty2'
Jan 17 20:11:59 (none) auth.info login[7803]: root login on 'tty3'
Jan 17 20:11:59 (none) auth.info login[7808]: root login on 'tty4'
Jan 17 19:20:58 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:21:00 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:21:00 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:21:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe1672000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:21:27 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:21:28 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:21:28 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:21:28 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe171e000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:21:59 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:22:00 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe17dc000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:22:10 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 19:24:42 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:24:43 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:24:43 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:24:43 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe1b62000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:24:44 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:24:54 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 19:26:13 (none) user.warn kernel: aufs au_warn_loopback:111:loop10[11843]: you may want to try another patch for loopback file on tmpfs(0x1021994) branch
Jan 17 19:26:14 (none) user.warn kernel: aufs test_add:262:mount[11942]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 0/0/01777
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) daemon.err nmbd[11984]: [2012/01/17 20:26:39.113473,  0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   *****
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   Samba name server MLD is now a local master browser for workgroup  on subnet 192.168.178.3
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   *****
Jan 17 20:27:23 (none) daemon.err smbd[16227]: [2012/01/17 20:27:23.712050,  0] smbd/service.c:1031(make_connection_snum)
Jan 17 20:27:23 (none) daemon.err smbd[16227]:   '/mnt/dvd' does not exist or permission denied when connecting to [dvd] Error was No such file or directory
Jan 17 20:27:23 (none) daemon.err smbd[16227]: [2012/01/17 20:27:23.721998,  0] smbd/service.c:1031(make_connection_snum)
Jan 17 20:27:23 (none) daemon.err smbd[16227]:   '/mnt/dvd' does not exist or permission denied when connecting to [dvd] Error was No such file or directory
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:44 (none) user.err vdr: [2960] ERROR (svdrp.c,432): Broken pipe
Jan 17 19:28:45 (none) user.info kernel:  hdb: hdb1 hdb2
Jan 17 19:28:45 (none) user.info kernel:  hdb: hdb1 hdb2
Jan 17 19:28:53 (none) user.info kernel: vdr[2960]: segfault at 0 ip 08112025 sp bf87cce0 error 4 in vdr[8048000+148000]
Jan 17 20:29:18 (none) daemon.err smbd[16227]: [2012/01/17 20:29:18.553803,  0] smbd/nttrans.c:2271(call_nt_transact_ioctl)
Jan 17 20:29:18 (none) daemon.err smbd[16227]:   call_nt_transact_ioctl(0x1401c4): Currently not implemented.


Fand die log aber nicht sonderlich auffällig was den Fehler betrifft. Die sysinit kann ich nicht öffen. Mist, konnte ich aber mal. BUG kommt. Gruß Bernd  

9
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 17, 2012, 20:39:50 »
@p3f: ich habe die ff-sd 3.0.1-2012.01.12_42 vom 13.1 auf cd gebrannt und von dieser via OSD installiert.

automatisch funktioniert tadellos.

manuell partitioniert MLD nur und dann kann ich am OSD nix mehr machen. Für mich sieht das so aus als ob da ein script keinen Bock mehr hat, denn eine Fehlermeldung kommt da nicht :-)

install.log
Quote

==partitioning disk hdb==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.


The number of cylinders for this disk is set to 76319.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-76319, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-76319, default 76319):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (2-76319, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-76319, default 76319):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (9540-76319, default 9540): Using default value 9540
Last cylinder or +size or +sizeM or +sizeK (9540-76319, default 76319): Using default value 76319

Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table

Disk /dev/hdb: 80.0 GB, 80026361856 bytes
64 heads, 32 sectors/track, 76319 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/hdb1   *        2048    19535871     9766912  83 Linux
/dev/hdb2        19535872   156301311    68382720  83 Linux
------ done ------

Via Webinterface funktioniert die Installation fehlerfrei. Achja die Daten hab ich doch via samba rübergezogen.

Ich bin nach wie vor begeistert.

Gruß Bernd  

10
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 17, 2012, 10:53:02 »
@p3f: Ich installiere von CD auf eine nicht formatierten Festplatte.

Bis zum schreiben der bootoption komme ich wahrscheinlich erst gar nicht.
Samba ist gut... bei einer Erstinstallation... :huh:

Ich werde heute Abend mal ne Testfestplatte nehmen und per console in die logs schauen...

Das die Glaskugel aber auch immer noch nicht funktioniert? :)

Gruß Bernd  

11
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 16, 2012, 21:44:55 »
Ich war im falschen Bereich. funktioniert. Sorry  :rolleyes:

12
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 16, 2012, 20:04:45 »
@MAarcMic: bugreport kann ich nicht hab nur ne Berechtigung in Mantis bis Kategorie 2.0.

13
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 16, 2012, 18:26:53 »
So hab nochmal alles installiert. Manuelle Installation funktioniert via osd nicht. Die automatische funktioniert. Das installierte System kann anschl gestartet werden. Es wird auch rebootet aber die cd bleibt drin. Es wird immer mit Konsole 1 gestartet. Besser wäre 5. Gruß Bernd

14
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 16, 2012, 15:47:16 »
@Matthias Ok, mit dem Installer hab ich jetzt verstanden. War nur unsicher ob ich das wählen musste oder nicht. Geht anderen bestimmt auch so. Ich hab übers OSD installiert. Ist ja aber nicht dramatisch das nicht wirklich neu gebootet wird. Ich schau mir das aber heute abend noch mal an.

@MarMic Ich hatte bis gestern "nur" MLD 2.0 laufen.  Werde heute Abend dann auch skinelchi installieren und klicken obs läuft oder nicht. An der Bewertung/Beurteilung hat sich ja nix geändert. :-) Gruß Bernd
 

15
Entwicklung [ Development ] / !achtung! Bitte Alle Das Standard Iso Testen
« on: January 16, 2012, 11:48:13 »
Alter Schwede, da hat sich ja einiges getan: Respekt! Mit Installation am TV und Webinterface... neues Logo: Sehr geil.  :applaus

Ich hab nur kleine Anmerkungen zum ff-sd 3.0.1-2012.01.12_42:

Im deutschen Menü steht: comands statt Befehle

Eine Manuelle Installation bricht vor (oder während) der Formatierung der Video Partition ab.

Nach der automatischen Installation kommt die Frage ob das installierte System gestartet werden soll?
Da passiert aber nix weder reboot noch wird wird die CD ausgeworfen.

Was bitte bedeutet Installationsdateien (oder sowas in der Art) mit installieren? :unsure:

Mir fehlt noch skinelchi... ach ne ist ja schon dabei und muss nur auf getestet gestellt werden. ich stell heute abend den vdr mal von stable auf all

Gruß Bernd