Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - MarMic

1
Allgemein [ General ] / MLD 5.5
« on: January 30, 2023, 11:44:14 »
Hi, that is system depended

PC:

To start MLD on a PC, the downloaded image needs only to be copied to a USB stick or the ISO image burned to a CD. Then the PC can be started from the USB stick or CD.

Under Linux, the image can be copied to the USB stick as follows:

sudo dd bs=1M if=IMAGE.iso of=/dev/DEVICE
The IMAGE must be replaced by the name of the downloaded image, and DEVICE must be replaced by the device name of the USB stick.

Under Windows, select the image file in Win32DiskImager and write it to the USB stick. Make sure that your USB stick is selected under Device. The stick will be completely overwritten.

The corresponding CD cover for the ISO image is also available.

The image is not only for installation, but also for testing MLD live without installation.

Changes made in the live system are lost with the next restart. Installing the live system through the web interface or calling the 'install' command on the console provides a solution. This installs MLD on the selected drive, and with the next restart a full installation is available.

OH Now I See - You are asking for Reycom REC - Sorry duno that device

2
ToDo Liste [ToDo list] / ACPI Powerbutton Event
« on: January 25, 2023, 07:59:40 »
Teste ich naher und berichte

3
ToDo Liste [ToDo list] / ACPI Powerbutton Event
« on: January 24, 2023, 18:30:02 »
Hi Claus, ist da was passiert? beim Umstieg von 5.4 auf 5.5 macht mein vdr nun auch kein poweroff mehr durch den powerbutton weil das event "durch ein weiteres drücken" abgebrochen wird

4
Allgemein [ General ] / [MLD 5.5 Testing/Unstable] Probleme mit OSD
« on: January 24, 2023, 13:38:14 »
ich erinnere mich, dass es tatsächlich mit dem neueren nvidia treibern zu diesem Phänomen kam (vor 5 Jahren ^^)

edit:// ja richtig erinnert:
https://www.minidvblinux.de/forum/index.php/topic,8917.msg70556.html#msg70556

5
Allgemein [ General ] / [5.4 testing] GT 1030 kein Bild
« on: October 22, 2020, 10:59:58 »
Moin,

sieht nach Nvidia Kernel Modul Problem aus:

Code: [Select]
[    60.795] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[    60.795] (EE) NVIDIA:     system's kernel log for additional error messages and
[    60.795] (EE) NVIDIA:     consult the NVIDIA README for details.
[    60.795] (EE) No devices detected.
[    60.795] (EE)
Fatal server error:

Code: [Select]
Oct 18 16:38:24 MLD user.warn kernel: [    6.137674] nvidia: Unknown symbol ipmi_create_user (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.137856] nvidia: Unknown symbol ipmi_destroy_user (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.137989] nvidia: Unknown symbol ipmi_validate_addr (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.138032] nvidia: Unknown symbol ipmi_free_recv_msg (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.138054] nvidia: Unknown symbol ipmi_set_my_address (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.138097] nvidia: Unknown symbol ipmi_request_settime (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.138121] nvidia: Unknown symbol ipmi_set_gets_events (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174463] nvidia: Unknown symbol ipmi_create_user (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174618] nvidia: Unknown symbol ipmi_destroy_user (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174772] nvidia: Unknown symbol ipmi_validate_addr (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174816] nvidia: Unknown symbol ipmi_free_recv_msg (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174839] nvidia: Unknown symbol ipmi_set_my_address (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174882] nvidia: Unknown symbol ipmi_request_settime (err -2)
Oct 18 16:38:24 MLD user.warn kernel: [    6.174907] nvidia: Unknown symbol ipmi_set_gets_events (err -2)

vllt musste der Treiber für den Kernel gepatcht werden -> muss claus oder pit mal schauen

6
x86 Systeme (PC) / MLD 5.4 Intel J4105 kein Bild softhddevice
« on: April 25, 2019, 11:41:29 »
das hängt nicht am ausgabedevice, sondern an dem libs des unterbaus.

es ist nicht möglich das zu ändern... beim letzten versuch hatten wir fast 1 jahr keinen funktionierenden build server mehr.

Gruß

MarMic

7
x86 Systeme (PC) / 5.4 Stable - Neuinstallation mit Hürden
« on: March 02, 2019, 12:38:14 »
evtl noch treiber von modesetting auf intel stellen

nur so ne idee

gruß

MarMic

8
Ja

9
der läufer so wie VPS und die Uhren... kommen in den standard skins des vdrs vor und werden bei uns wegen dem wareagle patch angezeigt.

aus dem wiki:

Code: [Select]
t für diesen Vorgang gibt es einen Timer, welcher aber nur einen Teil des Vorganges abdeckt.
T für diesen Vorgang gibt es einen Timer, welcher den kompletten Vorgang abdeckt.
V dieser Vorgang hat eine VPS-Zeit, welche sich von seiner Start-Zeit unterscheidet.
* dieser Vorgang ist zur Zeit aktiv.

ich nehme an das der Läufer das Sternchen widergibt

gruß

MarMic

10
Entwicklung [ Development ] / Kein Intel HD600 support - wegen vaapi
« on: January 31, 2019, 20:40:24 »
Hi,

Es gibt noch nicht Mal ein Bit einer neuen version. Aber dann wenn es passieren sollte - sicherlich 😂

Gruß

MarMic

11
Entwicklung [ Development ] / Kein Intel HD600 support - wegen vaapi
« on: January 31, 2019, 08:12:49 »
Hi all,

nochmal zusammenfassend:

gestern beim rumspielen ist uns aufgefallen, dass wir vaapi, libva, liv-intel-driver, i965va WIE AUCH IMMER DER GANZE SCHMODER auch heißt in Version 1.7.3 nutzen und das der api version 0.39.4 entspricht.

D.h.: Stand Heute werden diese Karten nicht supported... (jeder darf sich selbst gerne raussuchen welchen bescheuerten Namen sich die PR Abteilung für seine eigene Karte ausgedacht hat)

Code: [Select]
intel-vaapi-driver NEWS -- summary of changes.  2018-12-10
Copyright (C) 2009-2018 Intel Corporation

Version 2.3.0 - 10.Dec.2018
* Bump version to 2.3.0
* Add new PCI ID for KBL and CFL
* Fix frame corruption when there are big MVs in VP8 encoding
* Fix dynamically bitrate resetting in AVC encoding
* Fix build errors when the toolchain doesn't support -fstack-protector
* Fix memory leak issue
* Make sure the achieved bitrate meet the requirement for VP8 encoding
* Optimize VPP on GEN8

Version 2.2.0 - 11.Jul.2018
* Bump version to 2.2.0
* Add new PCI ID for KBL-Y
* Add meson support
* Fix for VC1 decoding issues
* Fix VP8 encoding issues
* Fix the over-run issue in HEVC encoding
* Fix the max MV length in MPEG-2 encoding
* Fix packed header mode
* Fix building issue on Android

Version 2.1.0 - 12.Feb.2018
* Bump version to 2.1.0
* Add support for Cannolake (aka. CNL)
  - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit
  - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/{VP9,AVC} low power
  - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD
* Add support for VC1 interlaced video decoding
* Add support for Stats/PreEnc on GEN9
* Add support for vaExportSurfaceHandle()
* Add new PCI IDs for CFL
* Add mininum resolution query for encoder
* Ehance the logging to provide informational messages
* Fix VP9 brc issue on KBL
* A lot of bug fixes

Version 2.0.0 - 21.Oct.2017
* Bump version to 2.0.0
* Add support for Coffee Lake (aka. CFL)
  - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit
  - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/AVC low power CQP/CBR/VBR mode
  - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD
* Add support for H264 FEI
* Add support for HEVC ROI encoding
* Add support for intensity compensation for VC-1 decoding
* Improve the quality of the H264 encoder on BDW/BSW
* Improve the CSC performance between I420/NV12/P010/YUY2/VYUY format
* Improve the performace of va{Get, Put}Image for I420/NV12/P010/YUY2/VYUY format
* Fix image corruption for VP9 decoding
* Fix race condition in wayland support
* Fix ROI support in VDEnc support
* Fix corrupted stream when using VDEnc CBR/VBR
* Fix GCC 7.1.1 warnings/errors
* Update the shader for HEVC encoding

Version 1.8.3 - 28.Jun.2017
* Add support for Gemini Lake (aka. GLK)
  - Decoding: H.264/MPEG-2/VC-1/JPEG/VP8/HEVC/HEVC 10-bit/VP9/VP9 10-bit
  - Encoding: H.264/MPEG-2/JPEG/VP8/VP9/HEVC/HEVC 10-bit/AVC low power CQP mode
  - VPP: CSC/scaling/NoiseReduction/Deinterlacing{Bob, MotionAdaptive, MotionCompensated}/ColorBalance/STD
* Improve the quality of the HEVC encoder on SKL+ for CQP and CBR mode
* Add support for HEVC VBR mode on SKL+
* Set the quality range for HEVC / AVC encoder to 7
* Fix VP9 encoding quality issue on KBL
* Fix build issue on Android
* Fix the wrong order for AUD NAL unit in AVC encoder
* Fix the condition of enabling H.264 MB rate control
* Fix the memory leak issue in JPEG decoding

Version 1.8.2 - 22.May.2017
* Add support for querying slice structure for AVC encoding
* Add support for AVC multi-slice encoding on SKL+
* Add support for MVC encoding on SKL+
* Fix bad frame on SKL and BXT when the quality level is set to 1

Version 1.8.1 - 10.Apr.2017
* Add support for VAConfigAttribEncMaxSlices
* Disable AVC multi-slice encoding on SKL+
* Disable AVC ROI encoding on SKL+
* Disable bitrate control per temporal layer on SKL+
* Disable MVC encoding on SKL+

Version 1.8.0 - 31.Mar.2017
* Improve the quality of the H.264 encoder on SKL+ for CQP and CBR mode
* Improve the quality of the VP8 encoder on BSW+ for CQP and CBR mode
* Add support for H.264 VBR mode on SKL+
* Add support for VP8 VBR mode on BSW+
* Add support for low-power H.264 encoder on BXT and KBL
* Add support for CBR / VBR with low-power H.264 encoder on SKL+ (A HuC Firmware and
  a HuC supported Linux kernel are required)
* Add support for CSC and scaling with 10bit P010/I010 surface
* Optimize CSC and scaling with 8bit NV12 and I420 surface
* Fix the wrong memory object cache setting on SKL+
* Fix the EU number in media pipeline
* Fix the wrong bit shift in H.264 encoder
* Fix the 48bit graphics address on BSW+
* Fix building on NetBSD
* Known issues
  - The new AVC encoder doesn't support MVC/SVC encoding
  - The new AVC encoder doesn't support ROI encoding
- The new AVC encoder doesn't support multiple slice encoding

Gruß

MarMic

UND NEIN! es werden keine vaapi /libva/ va-Treiber oder sonst was bei mld 5.4 hochgezogen. Das hat für den letzten unstabilen Build server gesorgt und über 6 Monate gebraucht bis es wieder lief.

12
Allgemeines [ General ] / Regelmäßige Video Chats
« on: January 09, 2019, 21:22:58 »
sorry hatten uns auf 21.30 geinigt heute... in letzter zeit schaffen wir es meist erst gegen 22 uhr

13
x86 Systeme (PC) / Günstige Lüfterlose Hardware für MLD X64
« on: November 23, 2018, 10:31:43 »
mach die handy kamera an -> richte sie auf den IR Teil der fernbedienung und drücke eine taste -> du wirst sehen ob sie funktioniert oder nicht

14
x86 Systeme (PC) / Günstige Lüfterlose Hardware für MLD X64
« on: November 23, 2018, 09:53:28 »
@matt .sowas testet man immer mit seiner Handy kamera!!!

15
Raspberry PI / MLD 5.4 Installation - Bild nur Artefakte, kein Ton
« on: November 22, 2018, 09:34:07 »
ich habe keine ahnung vom rpi, aber vllt kann claus helfen wenn du ein Debug-Log erstellst.

gruß

marmic