46

x86 Systeme (PC) / [testing] Update macht System unbrauchbar

« on: February 21, 2020, 17:49:44 »

@NoTape

Ich muss jetzt mal nachfragen, zu welchen Zeitpunkten die Fotos und die Log-Dateien erstellt wurden. Nach dem Update? Dann ist wirklich etwas massiv schief gelaufen.

Laut Deinem Update-Log von Februar 20, 2020, 13:20:24 wurde der Kernel auf 5.4.20 aktualisiert. Auf den Fotos von 17:49:35 versucht das System aber, die Module aus /lib/modules/5.3.14 zu laden. Das ist der Pfad, der zum alten Kernel passte.
Laut der Logs von heute (aus dem Anhang) ist aber noch Kernel 5.3.14 installiert. Zeigen die die Situation vor dem Update?

Also der Reihe nach.

1.) Update gestartet - nach Neustart landet das System in der BusyBox
2.) poweroff
3.) boot mit der Option verbose, erstellen der beiden Fotos
4.) über snapshot das funktionierende Sstem wieder hergestellt
5.) Claus seinen Post entdeckt und daraufhin wieder einen Update gestartet.
6.) poweroff
7.) boot ohne Eingriff, landet wieder in der Busybox
8.) die Logs auf einen Stick kopiert und ins Forum geladen
9.) über snapshot das funktionierende Sstem wieder hergestellt

----------------------------------
Autor: clausmuus
"Genau das ist mir auch aufgefallen. Der Kernel passt nicht.
Der Grund ist, dass das boot Laufwerk /dev/sda1 nicht nach /boot gemountet ist. Die entsprechende Zeile fehlt in Deiner /etc/fstab
So kann der neue Kernel nicht dorthin kopiert werden und upgrades sind nicht mehr möglich."

Könnt ihr mir auf die Sprünge helfen! Wo muss ich was genau eintragen?

47

x86 Systeme (PC) / [testing] Update macht System unbrauchbar

« on: February 21, 2020, 15:10:55 »

@clausmuss,
leider habe ich Deinen Beitrag zu spät gesehen.
Danke für den Tipp mit dem USB-Stick, darauf bin ich nicht gekommen.
Alle von Dir gewünschten Logs sind in der Anlage.

Infos aus dem laufenden System.
Dein Upload Code lautet: gc0dPx

48

x86 Systeme (PC) / [testing] Update macht System unbrauchbar

« on: February 21, 2020, 14:04:44 »

Unterstützt die MLD-busybox dmesg? Dann wäre die Ausgabe sehr interessant. Möglichst in eine Dati umleiten und hier hochladen.

Oder/und beim Start nach dem Update auf "verbose" gehen und die Meldungen ggf. abfilmen. verbuse kannst Du aufrufen, indem Du beim ersten Erscheinen des Logos die Pfeiltaste nach unten betätigst.

Hier nun die gewünschten Infos aus dem verbose-boot, und zwei Fotos.
Da gibt wohl mehrere Probleme:

Display: failed to initialize serdisp (graphlcd)
modprobe: no such file or directory
Network: no cable, not reachable
Start powersafe: nonexisting directory

Hier noch Infos aus dem laufenden System.
Dein Upload Code lautet: gc0dPx

Nachtrag:
In der BusyBox gibt es dmesg.
Leider war die von mir gespeicherte Datei (dmesg > notape_log), nach dem reboot nicht mehr vorhanden.
Das file-System war/ist wohl zu diesem Zeitpunkt read only.

49

x86 Systeme (PC) / [testing] Update macht System unbrauchbar

« on: February 20, 2020, 13:20:24 »

Obwohl die Fehlermeldungen über GUI und auch über Konsole verschwunden sind, funktioniert es noch nicht.

Nach einem Neustart landet die Maschine wieder in der BusyBox, sie ist dann auch nicht über ssh zu erreichen.
Über die Tastatureingabe "snapshot_manager" konnte ich aber wieder auf die vorher laufende Version zurückgehen!

Danach habe ich noch einmal einen Versuch über die Konsole gemacht - aber auch da endet der Neustart in der BusyBox.

Code: [Select]

mld-vdr2 /root #
mld-vdr2 /root # apt update
Get:1 http://www.minidvblinux.de/download/5.4/files testing InRelease [2.441 B]
Fetched 2.441 B in 0s (7.925 B/s)   
Reading package lists... Done
Building dependency tree       
Reading state information... Done
24 packages can be upgraded. Run 'apt list --upgradable' to see them.
mld-vdr2 /root #
mld-vdr2 /root # apt list --upgradable
Listing... Done
alsa/testing 1.1.3-44.4+5.4.20.202.42 amd64 [upgradable from: 1.1.3-44.3+5.3.14.202.34]
apt/testing 1.4.8-73 amd64 [upgradable from: 1.4.8-73]
btrfs/testing 4.7.3-116+5.4.20.202.42 amd64 [upgradable from: 4.7.3-116+5.3.14.202.34]
busybox/testing 1:1.25.1-55.3 amd64 [upgradable from: 1:1.25.1-55.2]
chromium/testing 71.0.3578.80-26.2 amd64 [upgradable from: 71.0.3578.80-26.1]
dpkg/testing 1.18.25-18 amd64 [upgradable from: 1.18.25-18]
dvb/testing 2:0-10.13+5.4.20.202.42 amd64 [upgradable from: 2:0-10.3+5.3.14.202.34]
dvb-vtuner/testing 0-5.4+5.4.20.202.42 amd64 [upgradable from: 0-5.3+5.3.14.202.34]
eventlircd/testing 1:2016.03.15-38.2+5.4.20.202.42 amd64 [upgradable from: 1:2016.03.15-38.2+5.3.14.202.34]
graphlcd-base/testing 1.0.2-31.1+5.4.20.202.42 amd64 [upgradable from: 1.0.2-31.1+5.3.14.202.34]
i2c/testing 3.1.2-13+5.4.20.202.42 amd64 [upgradable from: 3.1.2-13+5.3.14.202.34]
initramfs/testing 2020.02.15-112.1 amd64 [upgradable from: 2019.11.29-112.1]
install/testing 0-145.9 amd64 [upgradable from: 0-145.8]
irkeytable/testing 1.12.3-13.17 amd64 [upgradable from: 1.12.3-13.14]
kernel/testing 5.4.20.202.42-202.45 amd64 [upgradable from: 5.3.14.202.34-202.36]
network/testing 0-79.4+5.4.20.202.42 amd64 [upgradable from: 0-79.3+5.3.14.202.34]
powersave/testing 0-9+5.4.20.202.42 amd64 [upgradable from: 0-9+5.3.14.202.34]
sensors/testing 3.4.0-10.1+5.4.20.202.42 amd64 [upgradable from: 3.4.0-10.1+5.3.14.202.34]
surf/testing 0.7-14.1 amd64 [upgradable from: 0.7-14]
tools/testing 0-22.4 amd64 [upgradable from: 0-22.2]
wakeup/testing 1.1-19.1+5.4.20.202.42 amd64 [upgradable from: 1.1-19.1+5.3.14.202.34]
xorg/testing 1:1.19.2-93.4+5.4.20.202.42 amd64 [upgradable from: 1:1.19.2-93.4+5.3.14.202.34]
xorg-autodetect/testing 0-45.3+5.4.20.202.42 amd64 [upgradable from: 0-45.2+5.3.14.202.34]
xorg-nvidia/testing 390.132-37.11+5.4.20.202.42 amd64 [upgradable from: 390.129-37.10+5.3.14.202.34]
mld-vdr2 /root #
mld-vdr2 /root # apt dist-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  rc-core-drivers
The following packages will be upgraded:
  alsa apt btrfs busybox chromium dpkg dvb dvb-vtuner eventlircd graphlcd-base i2c initramfs install irkeytable kernel network
  powersave sensors surf tools wakeup xorg xorg-autodetect xorg-nvidia
The following packages will be DOWNGRADED:
  rc-core
24 upgraded, 1 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
Need to get 0 B/144 MB of archives.
After this operation, 5.554 kB disk space will be freed.
Do you want to continue? [Y/n]
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2020-02-20 12:34'
Delete subvolume (no-commit): '/mnt/root/2020-02-20 12:20'
(Reading database ... 34535 files and directories currently installed.)
Preparing to unpack .../busybox_1%3a1.25.1-55.3_amd64.deb ...
Unpacking busybox (1:1.25.1-55.3) over (1:1.25.1-55.2) ...
Setting up busybox (1:1.25.1-55.3) ...
(Reading database ... 34536 files and directories currently installed.)
Preparing to unpack .../dpkg_1.18.25-18_amd64.deb ...
Unpacking dpkg (1.18.25-18) over (1.18.25-18) ...
Setting up dpkg (1.18.25-18) ...
(Reading database ... 34536 files and directories currently installed.)
Preparing to unpack .../apt_1.4.8-73_amd64.deb ...
Unpacking apt (1.4.8-73) over (1.4.8-73) ...
Setting up apt (1.4.8-73) ...
(Reading database ... 34536 files and directories currently installed.)
Preparing to unpack .../initramfs_2020.02.15-112.1_amd64.deb ...
Unpacking initramfs (2020.02.15-112.1) over (2019.11.29-112.1) ...
Setting up initramfs (2020.02.15-112.1) ...
Selecting previously unselected package rc-core-drivers.
(Reading database ... 34536 files and directories currently installed.)
Preparing to unpack .../00-rc-core-drivers_0-0+5.4.20.202.42_amd64.deb ...
Unpacking rc-core-drivers (0-0+5.4.20.202.42) ...
dpkg: warning: downgrading rc-core from 2:0-17.10+5.3.14.202.34 to 0-17.11
Preparing to unpack .../01-rc-core_0-17.11_amd64.deb ...
Unpacking rc-core (0-17.11) over (2:0-17.10+5.3.14.202.34) ...
Preparing to unpack .../02-irkeytable_1.12.3-13.17_amd64.deb ...
Unpacking irkeytable (1.12.3-13.17) over (1.12.3-13.14) ...
Preparing to unpack .../03-eventlircd_1%3a2016.03.15-38.2+5.4.20.202.42_amd64.deb ...
Unpacking eventlircd (1:2016.03.15-38.2+5.4.20.202.42) over (1:2016.03.15-38.2+5.3.14.202.34) ...
Preparing to unpack .../04-graphlcd-base_1.0.2-31.1+5.4.20.202.42_amd64.deb ...
Unpacking graphlcd-base (1.0.2-31.1+5.4.20.202.42) over (1.0.2-31.1+5.3.14.202.34) ...
Preparing to unpack .../05-xorg_1%3a1.19.2-93.4+5.4.20.202.42_amd64.deb ...
Unpacking xorg (1:1.19.2-93.4+5.4.20.202.42) over (1:1.19.2-93.4+5.3.14.202.34) ...
Preparing to unpack .../06-network_0-79.4+5.4.20.202.42_amd64.deb ...
Unpacking network (0-79.4+5.4.20.202.42) over (0-79.3+5.3.14.202.34) ...
Preparing to unpack .../07-i2c_3.1.2-13+5.4.20.202.42_amd64.deb ...
Unpacking i2c (3.1.2-13+5.4.20.202.42) over (3.1.2-13+5.3.14.202.34) ...
Preparing to unpack .../08-alsa_1.1.3-44.4+5.4.20.202.42_amd64.deb ...
Unpacking alsa (1.1.3-44.4+5.4.20.202.42) over (1.1.3-44.3+5.3.14.202.34) ...
Preparing to unpack .../09-powersave_0-9+5.4.20.202.42_amd64.deb ...
Unpacking powersave (0-9+5.4.20.202.42) over (0-9+5.3.14.202.34) ...
Preparing to unpack .../10-sensors_3.4.0-10.1+5.4.20.202.42_amd64.deb ...
Unpacking sensors (3.4.0-10.1+5.4.20.202.42) over (3.4.0-10.1+5.3.14.202.34) ...
Preparing to unpack .../11-dvb_2%3a0-10.13+5.4.20.202.42_amd64.deb ...
Unpacking dvb (2:0-10.13+5.4.20.202.42) over (2:0-10.3+5.3.14.202.34) ...
Preparing to unpack .../12-xorg-autodetect_0-45.3+5.4.20.202.42_amd64.deb ...
Unpacking xorg-autodetect (0-45.3+5.4.20.202.42) over (0-45.2+5.3.14.202.34) ...
Preparing to unpack .../13-dvb-vtuner_0-5.4+5.4.20.202.42_amd64.deb ...
Unpacking dvb-vtuner (0-5.4+5.4.20.202.42) over (0-5.3+5.3.14.202.34) ...
Preparing to unpack .../14-wakeup_1.1-19.1+5.4.20.202.42_amd64.deb ...
Unpacking wakeup (1.1-19.1+5.4.20.202.42) over (1.1-19.1+5.3.14.202.34) ...
Preparing to unpack .../15-xorg-nvidia_390.132-37.11+5.4.20.202.42_amd64.deb ...
Unpacking xorg-nvidia (390.132-37.11+5.4.20.202.42) over (390.129-37.10+5.3.14.202.34) ...
Preparing to unpack .../16-kernel_5.4.20.202.42-202.45_amd64.deb ...
Unpacking kernel (5.4.20.202.42-202.45) over (5.3.14.202.34-202.36) ...
Setting up kernel (5.4.20.202.42-202.45) ...
(Reading database ... 34398 files and directories currently installed.)
Preparing to unpack .../btrfs_4.7.3-116+5.4.20.202.42_amd64.deb ...
Unpacking btrfs (4.7.3-116+5.4.20.202.42) over (4.7.3-116+5.3.14.202.34) ...
Preparing to unpack .../chromium_71.0.3578.80-26.2_amd64.deb ...
Unpacking chromium (71.0.3578.80-26.2) over (71.0.3578.80-26.1) ...
Preparing to unpack .../install_0-145.9_amd64.deb ...
Unpacking install (0-145.9) over (0-145.8) ...
Preparing to unpack .../surf_0.7-14.1_amd64.deb ...
Unpacking surf (0.7-14.1) over (0.7-14) ...
Preparing to unpack .../tools_0-22.4_amd64.deb ...
Unpacking tools (0-22.4) over (0-22.2) ...
Setting up wakeup (1.1-19.1+5.4.20.202.42) ...
Setting up dvb-vtuner (0-5.4+5.4.20.202.42) ...
Setting up powersave (0-9+5.4.20.202.42) ...
Setting up alsa (1.1.3-44.4+5.4.20.202.42) ...
Setting up rc-core-drivers (0-0+5.4.20.202.42) ...
Setting up i2c (3.1.2-13+5.4.20.202.42) ...
Setting up network (0-79.4+5.4.20.202.42) ...
Setting up btrfs (4.7.3-116+5.4.20.202.42) ...
Setting up xorg (1:1.19.2-93.4+5.4.20.202.42) ...
Setting up tools (0-22.4) ...
Setting up graphlcd-base (1.0.2-31.1+5.4.20.202.42) ...
Setting up xorg-nvidia (390.132-37.11+5.4.20.202.42) ...
Setting up install (0-145.9) ...
Setting up surf (0.7-14.1) ...
Setting up xorg-autodetect (0-45.3+5.4.20.202.42) ...
Setting up dvb (2:0-10.13+5.4.20.202.42) ...
Setting up sensors (3.4.0-10.1+5.4.20.202.42) ...
Setting up rc-core (0-17.11) ...
Setting up chromium (71.0.3578.80-26.2) ...
Setting up irkeytable (1.12.3-13.17) ...
Setting up eventlircd (1:2016.03.15-38.2+5.4.20.202.42) ...
mld-vdr2 /root #


50

x86 Systeme (PC) / [testing] Update macht System unbrauchbar

« on: February 19, 2020, 15:42:02 »

Ich habe gerade ein Update auf meinem VDR2 ausgeführt (GUI / Aktualisierungen / Alle Pakete).
Nach einem Neustart landete die Maschine nur noch in der BusyBox.

Von dort konnte ich dann allerdings über die Eingabe "snapshot_manager" auf die vorher laufende Version zurückgehen!

Danach habe ich noch einmal einen Versuch über die Konsole gemacht - keine Veränderung, hier der Verlauf:

Code: [Select]

mld-vdr2 /root # apt update
Get:1 http://www.minidvblinux.de/download/5.4/files testing InRelease [2.437 B]
Fetched 2.437 B in 0s (6.551 B/s)   
Reading package lists... Done
Building dependency tree       
Reading state information... Done
25 packages can be upgraded. Run 'apt list --upgradable' to see them.
mld-vdr2 /root # apt dist-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  rc-core-drivers
The following packages will be upgraded:
  alsa apt btrfs busybox chromium dpkg dvb dvb-vtuner eventlircd graphlcd-base i2c initramfs install irkeytable kernel lirc
  network powersave sensors surf tools wakeup xorg xorg-autodetect xorg-nvidia
The following packages will be DOWNGRADED:
  rc-core
25 upgraded, 1 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
Need to get 0 B/144 MB of archives.
After this operation, 5.579 kB disk space will be freed.
Do you want to continue? [Y/n]
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2020-02-19 15:16'
Delete subvolume (no-commit): '/mnt/root/2020-02-19 15:12'
Delete subvolume (no-commit): '/mnt/root/2019-12-18 23:22'
(Reading database ... 34619 files and directories currently installed.)
Preparing to unpack .../busybox_1%3a1.25.1-55.3_amd64.deb ...
Unpacking busybox (1:1.25.1-55.3) over (1:1.25.1-55.2) ...
Setting up busybox (1:1.25.1-55.3) ...
(Reading database ... 34620 files and directories currently installed.)
Preparing to unpack .../dpkg_1.18.25-18_amd64.deb ...
Unpacking dpkg (1.18.25-18) over (1.18.25-18) ...
Setting up dpkg (1.18.25-18) ...
(Reading database ... 34620 files and directories currently installed.)
Preparing to unpack .../apt_1.4.8-73_amd64.deb ...
Unpacking apt (1.4.8-73) over (1.4.8-73) ...
Setting up apt (1.4.8-73) ...
(Reading database ... 34620 files and directories currently installed.)
Preparing to unpack .../initramfs_2020.02.15-112.1_amd64.deb ...
Unpacking initramfs (2020.02.15-112.1) over (2019.11.29-112.1) ...
Setting up initramfs (2020.02.15-112.1) ...
Selecting previously unselected package rc-core-drivers.
(Reading database ... 34620 files and directories currently installed.)
Preparing to unpack .../00-rc-core-drivers_0-0+5.4.20.202.42_amd64.deb ...
Unpacking rc-core-drivers (0-0+5.4.20.202.42) ...
dpkg: warning: downgrading rc-core from 2:0-17.10+5.3.14.202.34 to 0-17.11
Preparing to unpack .../01-rc-core_0-17.11_amd64.deb ...
Unpacking rc-core (0-17.11) over (2:0-17.10+5.3.14.202.34) ...
Preparing to unpack .../02-irkeytable_1.12.3-13.15_amd64.deb ...
Unpacking irkeytable (1.12.3-13.15) over (1.12.3-13.14) ...
dpkg: error processing archive /tmp/apt-dpkg-install-ksz0FO/02-irkeytable_1.12.3-13.15_amd64.deb (--unpack):
 trying to overwrite '/usr/bin/irxevent', which is also in package lirc 2:0.9.4-84.11
Preparing to unpack .../03-eventlircd_1%3a2016.03.15-38.2+5.4.20.202.42_amd64.deb ...
Unpacking eventlircd (1:2016.03.15-38.2+5.4.20.202.42) over (1:2016.03.15-38.2+5.3.14.202.34) ...
Preparing to unpack .../04-graphlcd-base_1.0.2-31.1+5.4.20.202.42_amd64.deb ...
Unpacking graphlcd-base (1.0.2-31.1+5.4.20.202.42) over (1.0.2-31.1+5.3.14.202.34) ...
Preparing to unpack .../05-xorg_1%3a1.19.2-93.4+5.4.20.202.42_amd64.deb ...
Unpacking xorg (1:1.19.2-93.4+5.4.20.202.42) over (1:1.19.2-93.4+5.3.14.202.34) ...
Preparing to unpack .../06-network_0-79.3+5.4.20.202.42_amd64.deb ...
Unpacking network (0-79.3+5.4.20.202.42) over (0-79.3+5.3.14.202.34) ...
Preparing to unpack .../07-i2c_3.1.2-13+5.4.20.202.42_amd64.deb ...
Unpacking i2c (3.1.2-13+5.4.20.202.42) over (3.1.2-13+5.3.14.202.34) ...
Preparing to unpack .../08-alsa_1.1.3-44.4+5.4.20.202.42_amd64.deb ...
Unpacking alsa (1.1.3-44.4+5.4.20.202.42) over (1.1.3-44.3+5.3.14.202.34) ...
Preparing to unpack .../09-powersave_0-9+5.4.20.202.42_amd64.deb ...
Unpacking powersave (0-9+5.4.20.202.42) over (0-9+5.3.14.202.34) ...
Preparing to unpack .../10-sensors_3.4.0-10.1+5.4.20.202.42_amd64.deb ...
Unpacking sensors (3.4.0-10.1+5.4.20.202.42) over (3.4.0-10.1+5.3.14.202.34) ...
Preparing to unpack .../11-dvb_2%3a0-10.13+5.4.20.202.42_amd64.deb ...
Unpacking dvb (2:0-10.13+5.4.20.202.42) over (2:0-10.3+5.3.14.202.34) ...
Preparing to unpack .../12-xorg-autodetect_0-45.3+5.4.20.202.42_amd64.deb ...
Unpacking xorg-autodetect (0-45.3+5.4.20.202.42) over (0-45.2+5.3.14.202.34) ...
Preparing to unpack .../13-dvb-vtuner_0-5.4+5.4.20.202.42_amd64.deb ...
Unpacking dvb-vtuner (0-5.4+5.4.20.202.42) over (0-5.3+5.3.14.202.34) ...
Preparing to unpack .../14-wakeup_1.1-19.1+5.4.20.202.42_amd64.deb ...
Unpacking wakeup (1.1-19.1+5.4.20.202.42) over (1.1-19.1+5.3.14.202.34) ...
Preparing to unpack .../15-xorg-nvidia_390.132-37.11+5.4.20.202.42_amd64.deb ...
Unpacking xorg-nvidia (390.132-37.11+5.4.20.202.42) over (390.129-37.10+5.3.14.202.34) ...
Preparing to unpack .../16-kernel_5.4.20.202.42-202.45_amd64.deb ...
Unpacking kernel (5.4.20.202.42-202.45) over (5.3.14.202.34-202.36) ...
Errors were encountered while processing:
 /tmp/apt-dpkg-install-ksz0FO/02-irkeytable_1.12.3-13.15_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
mld-vdr2 /root #

mld-vdr2 /root # apt --fix-broken install
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.
16 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2020-02-19 15:22'
Delete subvolume (no-commit): '/mnt/root/2020-02-19 15:16'
Setting up kernel (5.4.20.202.42-202.45) ...
Setting up eventlircd (1:2016.03.15-38.2+5.4.20.202.42) ...
Setting up wakeup (1.1-19.1+5.4.20.202.42) ...
Setting up dvb-vtuner (0-5.4+5.4.20.202.42) ...
Setting up powersave (0-9+5.4.20.202.42) ...
Setting up alsa (1.1.3-44.4+5.4.20.202.42) ...
Setting up rc-core-drivers (0-0+5.4.20.202.42) ...
Setting up i2c (3.1.2-13+5.4.20.202.42) ...
Setting up network (0-79.3+5.4.20.202.42) ...
Setting up xorg (1:1.19.2-93.4+5.4.20.202.42) ...
Setting up graphlcd-base (1.0.2-31.1+5.4.20.202.42) ...
Setting up xorg-nvidia (390.132-37.11+5.4.20.202.42) ...
Setting up xorg-autodetect (0-45.3+5.4.20.202.42) ...
Setting up dvb (2:0-10.13+5.4.20.202.42) ...
Setting up sensors (3.4.0-10.1+5.4.20.202.42) ...
Setting up rc-core (0-17.11) ...
mld-vdr2 /root #

mld-vdr2 /root # apt dist-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  btrfs chromium install irkeytable lirc surf tools
7 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/71,1 MB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
Create a snapshot of '/mnt/root/@root' in '/mnt/root/2020-02-19 15:23'
Delete subvolume (no-commit): '/mnt/root/2020-02-19 15:22'
(Reading database ... 34481 files and directories currently installed.)
Preparing to unpack .../0-btrfs_4.7.3-116+5.4.20.202.42_amd64.deb ...
Unpacking btrfs (4.7.3-116+5.4.20.202.42) over (4.7.3-116+5.3.14.202.34) ...
Preparing to unpack .../1-chromium_71.0.3578.80-26.2_amd64.deb ...
Unpacking chromium (71.0.3578.80-26.2) over (71.0.3578.80-26.1) ...
Preparing to unpack .../2-install_0-145.9_amd64.deb ...
Unpacking install (0-145.9) over (0-145.8) ...
Preparing to unpack .../3-irkeytable_1.12.3-13.15_amd64.deb ...
Unpacking irkeytable (1.12.3-13.15) over (1.12.3-13.14) ...
dpkg: error processing archive /tmp/apt-dpkg-install-6AcQQS/3-irkeytable_1.12.3-13.15_amd64.deb (--unpack):
 trying to overwrite '/usr/bin/irxevent', which is also in package lirc 2:0.9.4-84.11
Preparing to unpack .../4-lirc_2%3a0.9.4-84.12_amd64.deb ...
Unpacking lirc (2:0.9.4-84.12) over (2:0.9.4-84.11) ...
Preparing to unpack .../5-surf_0.7-14.1_amd64.deb ...
Unpacking surf (0.7-14.1) over (0.7-14) ...
Preparing to unpack .../6-tools_0-22.4_amd64.deb ...
Unpacking tools (0-22.4) over (0-22.2) ...
Errors were encountered while processing:
 /tmp/apt-dpkg-install-6AcQQS/3-irkeytable_1.12.3-13.15_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
mld-vdr2 /root #


51

Allgemein [ General ] / Neuer Server

« on: February 18, 2020, 00:45:33 »

Hallo Claus,

vielen Dank für den neuen Server und natürlich auch für diese wirklich tolle Distribution und deinen unermüdlichen Einsatz. Vielen Dank aber auch an die fleißigen Mitglieder im Entwicklerteam.

MLD ist wirklich gelungen und macht Spaß!

Viele Grüße aus der Wedemark
Uwe

52

Raspberry PI / Raspberry Pi3 bringt mich zum Wahnsinn

« on: January 22, 2020, 15:59:03 »

... Ich nutze da gerne htop, weil ich dann besser sehen kann, wenn ein einzelner Core auf Vollast läuft....

Die Daten für einzelne CPUs (Kerne) kann man auch mit "top" anzeigen lassen.
Einfach während "top" läuft die Taste "1" betägigen!

53

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: December 13, 2019, 14:33:31 »

Achtung: In diesem Thema wurde seit 120 Tagen nichts mehr geschrieben.
Solltest du deiner Antwort nicht sicher sein, starte ein neues Thema.

Seit meinem letzten Beitrag habe ich, in unregelmäßigen Abständen, immer wieder mal ein Update gestartet. Bislang war das allerdings erfolglos. Nach dem letzten Update funktioniert der Stick nun aber auch auf den DVB-T2-Transpondern 490, 626MHz.

Vielen Dank an die unbekannte helfende Hand und vor allem vielen Dank an die MLD-Entwicklungsabteilung! 

Viele Grüße
NoTape

54

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: July 01, 2019, 22:19:19 »

Hallo Pit,

ich hatte ganz kurz, für ca. eine Sekunde Bild auf ARD, nachdem ich den unten beschriebenen Firmwaretausch vorgenommen hatte.
Der Upload Code lautet: BGNWdK
Vielleicht gibt es darin ja den entscheidenden Hinweis?!

Ich wollte einfach noch einmal alle Sender neu scannen - das hat aber nicht funktioniert:

Code: [Select]

MLD-NUC6i3 /root # t2scan -Y DE -t2
t2scan -Y DE -t2
t2scan version 20190318 (compiled for DVB API 5.10)
using settings for GERMANY
DVB aerial
DVB-T Europe UHF <790MHz
scan type TERRESTRIAL, channellist 16
output format vdr-2.1
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Silicon Labs Si2168": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
main:2852: FATAL: FE_READ_STATUS failed: 121 Remote I/O error
MLD-NUC6i3 /root #

Erst nachdem ich die vorhandene Firmware-Version
[   22.067110] si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[   22.820549] si2168 6-0064: firmware version: B 4.0.25

durch die von Dir in einem früheren Post vorgeschlagene Firmware-Version
[   20.047381] si2168 8-0067: firmware version: B 4.0.11
ersetzt hatte, funktionierte auch t2scan wieder.
Das hatte ich in einem früheren Post schon mal festgestellt und geschrieben.
t2scan funktioniert nicht mit der neueren Firware B 4.0.25 - diese wird aber von MLD "geliefert".

Hier der erfolgreiche Scan mit der Firmware B 4.0.11

Code: [Select]

MLD-NUC6i3 /root # t2scan -Y DE -t2
t2scan -Y DE -t2
t2scan version 20190318 (compiled for DVB API 5.10)
using settings for GERMANY
DVB aerial
DVB-T Europe UHF <790MHz
scan type TERRESTRIAL, channellist 16
output format vdr-2.1
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Silicon Labs Si2168": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'Silicon Labs Si2168' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (42.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T2...
Scanning 8MHz frequencies...
474000 (CH21): (time: 00:00.572)         signal ok: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 474000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16435) : scanning for services
service = ProSieben HD (ProSiebenSat.1 Media)
service = kabel eins HD (ProSiebenSat.1 Media)
service = SIXX HD (ProSiebenSat.1 Media)
service = Pro7 MAXX HD (ProSiebenSat.1 Media)
service = SAT.1 Gold HD (ProSiebenSat.1 Media)
service = Sport1 HD (ProSiebenSat.1 Media)
service = SAT.1 HD NDS/Bremen (ProSiebenSat.1 Media)
482000 (CH22): (time: 00:04.716)
490000 (CH23): (time: 00:06.761)         signal ok: QAM_AUTO f = 490000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 490000 kHz I999B8C999D0T16G19128Y0P0 (8468:12298:2562) : scanning for services
service = Das Erste HD (ARD)
service = arte HD (ARD)
service = phoenix HD (ARD)
service = tagesschau24 HD (ARD)
service = ONE HD (ARD)
498000 (CH24): (time: 00:15.504)
506000 (CH25): (time: 00:17.524)
514000 (CH26): (time: 00:19.562)
522000 (CH27): (time: 00:21.571)
530000 (CH28): (time: 00:23.594)
538000 (CH29): (time: 00:25.601)
546000 (CH30): (time: 00:27.625)
554000 (CH31): (time: 00:29.630)
562000 (CH32): (time: 00:31.660)
570000 (CH33): (time: 00:33.665)
578000 (CH34): (time: 00:35.687)
586000 (CH35): (time: 00:37.698)
594000 (CH36): (time: 00:39.721)         signal ok: QAM_AUTO f = 594000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 594000 kHz I999B8C999D0T16G19128Y0P0 (8468:12290:515) : scanning for services
service = ZDF HD (ZDFmobil)
service = ZDFinfo HD (ZDFmobil)
service = zdf_neo HD (ZDFmobil)
service = 3sat HD (ZDFmobil)
service = KiKA HD (ZDFmobil)
602000 (CH37): (time: 00:45.008)
610000 (CH38): (time: 00:47.026)
618000 (CH39): (time: 00:49.076)
626000 (CH40): (time: 00:51.122)         signal ok: QAM_AUTO f = 626000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 626000 kHz I999B8C999D0T16G19128Y0P0 (8468:12308:5122) : scanning for services
service = BR Fernsehen Süd HD* (ARD)
service = hr-fernsehen HD* (ARD)
service = MDR S-Anhalt HD* (ARD)
service = NDR FS NDS HD (ARD)
service = NDR FS HH HD* (ARD)
service = NDR FS SH HD* (ARD)
service = NDR FS MV HD* (ARD)
service = WDR HD Köln (ARD)
634000 (CH41): (time: 01:03.034)
642000 (CH42): (time: 01:05.077)
650000 (CH43): (time: 01:07.112)
658000 (CH44): (time: 01:09.122)         signal ok: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 658000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16387) : scanning for services
service = VOX HD (RTL Group)
service = SUPER RTL HD (RTL Group)
service = RTL II HD (RTL Group)
service = n-tv HD (RTL Group)
service = NITRO HD (RTL Group)
service = Tele 5 HD (RTL Group)
service = RTL HD HB/NDS (RTL Group)
666000 (CH45): (time: 01:14.301)
674000 (CH46): (time: 01:16.331)
682000 (CH47): (time: 01:18.338)         signal ok: QAM_AUTO f = 682000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
        QAM_AUTO f = 682000 kHz I999B8C999D0T32G16Y0P0 (8468:12352:16481) : scanning for services
service = Disney Channel HD (MEDIA BROADCAST)
service = WELT HD (MEDIA BROADCAST)
service = DMAX HD (MEDIA BROADCAST)
service = Eurosport 1 HD (MEDIA BROADCAST)
service = NICK HD (MEDIA BROADCAST)
service = 1-2-3.tv HD (MEDIA BROADCAST)
service = QVC HD (MEDIA BROADCAST)
service = HSE24 HD (MEDIA BROADCAST)
service = Bibel TV HD (MEDIA BROADCAST)
service = freenet Shopping (MEDIA BROADCAST)
service = QVC2 HD (MEDIA BROADCAST)
690000 (CH48): (time: 01:22.228)
698000 (CH49): (time: 01:24.276)
706000 (CH50): (time: 01:26.324)
714000 (CH51): (time: 01:28.372)
722000 (CH52): (time: 01:30.409)
730000 (CH53): (time: 01:32.418)
738000 (CH54): (time: 01:34.442)
746000 (CH55): (time: 01:36.449)
754000 (CH56): (time: 01:38.473)
762000 (CH57): (time: 01:40.523)
770000 (CH58): (time: 01:42.528)
778000 (CH59): (time: 01:44.553)
786000 (CH60): (time: 01:46.561)
(time: 01:48.587) dumping lists (43 services)
..
ProSieben HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:865=36:0;866:870:6CB:16929:8468:16435:0
kabel eins HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:881=36:0;882:886:6CB:16930:8468:16435:0
SIXX HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:897=36:0;898:902:6CB:16931:8468:16435:0
Pro7 MAXX HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:913=36:0;914:918:6CB:16932:8468:16435:0
SAT.1 Gold HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:929=36:0;930:934:6CB:16933:8468:16435:0
Sport1 HD;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:945=36:0;946:950:6CB:16934:8468:16435:0
SAT.1 HD NDS/Bremen;ProSiebenSat.1 Media:474000:B8D0G16S1T32Y0P0:T:27500:977=36:0;978:982:6CB:16936:8468:16435:0
Das Erste HD;ARD:490000:B8D0G19128S1T16Y0P0:T:27500:4369=36:4370=deu@17,4371=mis@17:4372:0:769:8468:2562:0
arte HD;ARD:490000:B8D0G19128S1T16Y0P0:T:27500:4385=36:4386=deu@17,4387=fra@17,4389=mul@17,4393=mis@17:4388:0:770:8468:2562:0
phoenix HD;ARD:490000:B8D0G19128S1T16Y0P0:T:27500:4401=36:4402=deu@17,4403=mul@17:4404:0:771:8468:2562:0
tagesschau24 HD;ARD:490000:B8D0G19128S1T16Y0P0:T:27500:4417=36:4418=deu@17,4419=mis@17:4420:0:772:8468:2562:0
ONE HD;ARD:490000:B8D0G19128S1T16Y0P0:T:27500:4433=36:4434=deu@17,4435=mis@17:4436:0:773:8468:2562:0
ZDF HD;ZDFmobil:594000:B8D0G19128S1T16Y0P0:T:27500:2110=36:0;2120,2121,2122:2130;2131:0:2001:8468:515:0
ZDFinfo HD;ZDFmobil:594000:B8D0G19128S1T16Y0P0:T:27500:2210=36:0;2220,2221:2230;2231:0:2002:8468:515:0
zdf_neo HD;ZDFmobil:594000:B8D0G19128S1T16Y0P0:T:27500:2310=36:0;2320,2321,2322:2330;2331:0:2003:8468:515:0
3sat HD;ZDFmobil:594000:B8D0G19128S1T16Y0P0:T:27500:2410=36:0;2420,2421:2430;2431:0:2004:8468:515:0
KiKA HD;ZDFmobil:594000:B8D0G19128S1T16Y0P0:T:27500:2510=36:0;2520,2521:2530;2531:0:2005:8468:515:0
BR Fernsehen Süd HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4689=36:4690=deu@17,4691=mis@17:4692:0:802:8468:5122:0
hr-fernsehen HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4673=36:4674=deu@17,4675=mis@17:4676:0:833:8468:5122:0
MDR S-Anhalt HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4657=36:4658=deu@17,4659=mis@17:4660:0:866:8468:5122:0
NDR FS NDS HD;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4625=36:4626=deu@17,4627=mis@17:4628:0:897:8468:5122:0
NDR FS HH HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4625=36:4626=deu@17,4627=mis@17:4628:0:898:8468:5122:0
NDR FS SH HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4625=36:4626=deu@17,4627=mis@17:4628:0:899:8468:5122:0
NDR FS MV HD*;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4625=36:4626=deu@17,4627=mis@17:4628:0:900:8468:5122:0
WDR HD Köln;ARD:626000:B8D0G19128S1T16Y0P0:T:27500:4641=36:4642=deu@17,4643=mis@17:4644:0:1030:8468:5122:0
VOX HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:353=36:0;354:358;361:6CB:16897:8468:16387:0
SUPER RTL HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:369=36:0;370:374;377:6CB:16898:8468:16387:0
RTL II HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:385=36:0;386:390;393:6CB:16899:8468:16387:0
n-tv HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:401=36:0;402:406:6CB:16900:8468:16387:0
NITRO HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:417=36:0;418:422;425:6CB:16901:8468:16387:0
Tele 5 HD;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:433=36:0;434:438:6CB:16902:8468:16387:0
RTL HD HB/NDS;RTL Group:658000:B8D0G16S1T32Y0P0:T:27500:465=36:0;466:470;473:6CB:16904:8468:16387:0
Disney Channel HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1361=36:0;1362:1366:6CB:16960:8468:16481:0
WELT HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1377=36:0;1378:1382:6CB:16961:8468:16481:0
DMAX HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1393=36:0;1394:1398:6CB:16962:8468:16481:0
Eurosport 1 HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1409=36:0;1410:0:6CB:16963:8468:16481:0
NICK HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1425=36:0;1426:0:6CB:16964:8468:16481:0
1-2-3.tv HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1441=36:0;1442:0:0:16965:8468:16481:0
QVC HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1457=36:0;1458:1462:0:16966:8468:16481:0
HSE24 HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1473=36:0;1474:1478:0:16967:8468:16481:0
Bibel TV HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1489=36:0;1490:1494:0:16968:8468:16481:0
freenet Shopping;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1505=36:0;1506:0:0:16969:8468:16481:0
QVC2 HD;MEDIA BROADCAST:682000:B8D0G16S1T32Y0P0:T:27500:1521=36:0;1522:1526:0:16970:8468:16481:0
Done, scan time: 01:48.587

Viele Grüße
NoTape

55

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: July 01, 2019, 21:09:17 »

Hallo Pit,

ich habe die Aktualisierungen installiert - leider keine Besserung.

Der Upload Code lautet: j69VR8

Viele Grüße
NoTape

56

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: June 19, 2019, 20:23:23 »

Hallo Pit,

ich hatte ja schon erwähnt, dass ich in den Vorbereitungen für einen Umzug stecke.
Heute musste ich unser künftiges Zuhause aus den Fängen eines wahnsinnig wüchsigen Blauregen befreien.

Nach der Befreiungsaktion habe ich dann einen DVB-T2-Test gemacht,
denn wir wohnen künftig 16 km Luftlinie vom Sender "Hannover Telemax" entfernt.

Mit der DVB-T-Selbsbauantenne, die ich seit Jahren erfolgreich in Betrieb habe, war das aber kein Problem.
https://www.cnet.de/41001557/die-beste-eigenbau-dvb-t-antenne-doppelquad-fuer-5-euro-basteln/1/

Der Empfang mit "tvheadend" hat prima funktioniert - bald geht das ja auch mit MLD. 

Ich bin Dir sehr, sehr dankbar, dass Du so engagiert an der Fehlerbeseitung arbeitest!
Gerne werde ich weiterhin testen - bis bald.

Viele Grüße
NoTape

57

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: June 17, 2019, 22:47:18 »

Hallo Pit,

wo hast Du gelesen das der Fernsehempfang nun auf allen Transpondern funktioniert?

Der Fehler ist unverändert - siehe /var/log/messages in meinem letzten Beitrag.
Und auch die Zeile: "Im folgenden Log habe ich vom ZDF (Bild/Ton OK) auf "Das Erste" (kein Bild/Ton) und wieder auf ZDF (Bild/Ton OK) geschaltet."

Viele Grüße
NoTape

58

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: June 17, 2019, 22:03:50 »

Hallo Pit,

vielen Dank für deine Geduld.

...
Und bitte auch bei einem Fehlerfall ein Debug-Log erzeugen, das hilft bei der Analyse.Das Webif startet(e) ja
...

Nach dem Upgrade hat die Maschine nicht mal mehr auf ping geantwortet, somit gab es auch kein Web-Interface. 

Jetzt hat das Upgrade wieder funktioniert.
Im folgenden Log habe ich vom ZDF (Bild/Ton OK) auf "Das Erste" (kein Bild/Ton) und wieder auf ZDF (Bild/Ton OK) geschaltet.

Code: [Select]

MLD-NUC6i3 /root # tail -f /var/log/messages
Jun 17 21:49:04 MLD user.err vdr: video: slow down video, duping frame
Jun 17 21:49:04 MLD user.info vdr: video: 15:50:34.894 +103  336   0/\ms  78+2 v-buf
Jun 17 21:49:14 MLD user.info vdr: [2041] SVDRP MLD-NUC6i3 < 127.0.0.1:36448 client connection accepted
Jun 17 21:49:14 MLD user.debug vdr: [2041] SVDRP MLD-NUC6i3 > 127.0.0.1:36448 server created
Jun 17 21:49:16 MLD user.info vdr: [2041] SVDRP MLD-NUC6i3 < 127.0.0.1:36448 connection closed
Jun 17 21:49:16 MLD user.debug vdr: [2041] SVDRP MLD-NUC6i3 < 127.0.0.1:36448 server destroyed
Jun 17 21:49:17 MLD user.info vdr: [1982] switching to channel 1 T-8468-2562-769 (Das Erste HD)
Jun 17 21:49:17 MLD user.debug vdr: [2040] osdteletext-receiver thread ended (pid=1982, tid=2040)
Jun 17 21:49:17 MLD user.debug kernel: [   25.444789] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 17 21:49:17 MLD user.debug vdr: [2042] device 1 TS buffer thread ended (pid=1982, tid=2042)
Jun 17 21:49:17 MLD user.debug vdr: [2039] buffer stats: 156980 (2%) used
Jun 17 21:49:17 MLD user.debug vdr: [2039] device 1 receiver thread ended (pid=1982, tid=2039)
Jun 17 21:49:17 MLD user.debug vdr: [1982] buffer stats: 0 (0%) used
Jun 17 21:49:17 MLD user.debug vdr: [3037] device 1 receiver thread started (pid=1982, tid=3037, prio=high)
Jun 17 21:49:17 MLD user.debug vdr: [1982] creating directory /tmp/vtx/T-8468-2562-769
Jun 17 21:49:17 MLD user.debug vdr: [3038] osdteletext-receiver thread started (pid=1982, tid=3038, prio=high)
Jun 17 21:49:17 MLD user.debug vdr: [3039] device 1 TS buffer thread started (pid=1982, tid=3039, prio=high)
Jun 17 21:49:18 MLD user.err vdr: video: slow down video, duping frame
Jun 17 21:49:18 MLD user.err vdr: video: decoder buffer empty, duping frame (3619/3638) 0 v-buf
Jun 17 21:49:18 MLD user.info vdr: video: --:--:--.---   +0    0   0/\ms   0+0 v-buf
Jun 17 21:49:26 MLD user.info vdr: [2012] frontend 0/0 timed out while tuning to channel 1 (Das Erste HD), tp 490
Jun 17 21:49:26 MLD user.debug kernel: [   99.463949] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 17 21:49:35 MLD user.debug kernel: [  108.560362] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 17 21:49:38 MLD user.debug vdr: [1982] --- begin invalid lock sequence report
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  -  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  R  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  U  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  W  -  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  *  -  -  -  R  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  *  -  -  -  U  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  U  -  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  W  -  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  U  -  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  R  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  U  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  R  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  U  -  -  -  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  R  -  -  -  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  *  -  -  R  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  *  -  -  *  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  *  -  -  *  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  *  -  -  *  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  -  *  -  -  *  -  -  -  -  -  U
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982  R  *  -  -  *  -  -  -  -  -  L
Jun 17 21:49:38 MLD user.debug vdr: [1982]  1982 invalid lock sequence: 1 Timers
Jun 17 21:49:38 MLD user.debug vdr: [1982] full backtrace:
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr cStateLock::Lock(cStateKey&, bool, int) calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr cTimers::GetTimersRead(cStateKey&, int) calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/lib/vdr/libvdr-skinnopacity.so.2.4.1 cNopacityDisplayChannel::SetEvents(cEvent const*, cEvent const*) at ??:?
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr cDisplayChannel::DisplayInfo() calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr cDisplayChannel::ProcessKey(eKeys) calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr main calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] /lib/x86_64-linux-gnu/libc.so.6 __libc_start_main at ??:?
Jun 17 21:49:39 MLD user.debug vdr: [1982] /usr/bin/vdr _start calling ?? at ??:0
Jun 17 21:49:39 MLD user.debug vdr: [1982] --- end invalid lock sequence report
Jun 17 21:49:39 MLD user.debug vdr: [1982] --- THERE WILL BE NO FURTHER REPORTS UNTIL VDR IS RESTARTED!
Jun 17 21:49:39 MLD user.info vdr: [1982] switching to channel 6 T-8468-515-2001 (ZDF HD)
Jun 17 21:49:39 MLD user.debug vdr: [3038] osdteletext-receiver thread ended (pid=1982, tid=3038)
Jun 17 21:49:39 MLD user.debug kernel: [  117.578189] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 17 21:49:39 MLD user.debug vdr: [3039] device 1 TS buffer thread ended (pid=1982, tid=3039)
Jun 17 21:49:39 MLD user.debug vdr: [3037] buffer stats: 0 (0%) used
Jun 17 21:49:39 MLD user.debug vdr: [3037] device 1 receiver thread ended (pid=1982, tid=3037)
Jun 17 21:49:39 MLD user.debug vdr: [1982] buffer stats: 0 (0%) used
Jun 17 21:49:39 MLD user.debug vdr: [3057] osdteletext-receiver thread started (pid=1982, tid=3057, prio=high)
Jun 17 21:49:39 MLD user.debug vdr: [3056] device 1 receiver thread started (pid=1982, tid=3056, prio=high)
Jun 17 21:49:39 MLD user.debug vdr: [3058] device 1 TS buffer thread started (pid=1982, tid=3058, prio=high)
Jun 17 21:49:39 MLD user.info vdr: audio/alsa: using device 'default'
Jun 17 21:49:39 MLD user.info vdr: audio/alsa: start delay 336ms
Jun 17 21:49:39 MLD user.err vdr: codec/audio: no frame
Jun 17 21:49:40 MLD user.info vdr: codec: YUV 420 supported
Jun 17 21:49:40 MLD user.info vdr: Using entrypoint for vpp: 10
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: noise reduction supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50
Jun 17 21:49:40 MLD user.info vdr: Enabling denoise filter (pos = 0)
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: deinterlacing supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: bob deinterlace supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: motion adaptive deinterlace supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: motion compensated deinterlace supported
Jun 17 21:49:40 MLD user.info vdr: Enabling Deint (pos = 1)
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: sharpening supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50
Jun 17 21:49:40 MLD user.info vdr: Enabling sharpening filter (pos = 0)
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: enabling color balance filters
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: Supported color balance filter count: 4
Jun 17 21:49:40 MLD user.info vdr: Hue (-180,00 - 180,00 ++ 1,00 = 0,00) (pos = 2)
Jun 17 21:49:40 MLD user.info vdr: Saturation (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)
Jun 17 21:49:40 MLD user.info vdr: Brightness (-100,00 - 100,00 ++ 1,00 = 0,00) (pos = 2)
Jun 17 21:49:40 MLD user.info vdr: Contrast (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: skin tone enhancement supported
Jun 17 21:49:40 MLD user.info vdr: video/vaapi: 0,00 - 4,00 ++ 1,00 = 0,00
Jun 17 21:49:40 MLD user.info vdr: Enabling skin tone filter (pos = 3)
Jun 17 21:49:40 MLD user.info vdr: Allocating 1 forward reference surfaces for postprocessing
Jun 17 21:49:40 MLD user.info vdr: Allocating 0 backward reference surfaces for postprocessing
Jun 17 21:49:40 MLD user.err vdr: Surface 0 query status = 0x6: invalid VASurfaceID
Jun 17 21:49:40 MLD user.info vdr: Changing to 0 forward reference surfaces for postprocessing
Jun 17 21:49:40 MLD user.info vdr: [2032] VNSI: Requesting clients to reload channel list
Jun 17 21:49:42 MLD user.err vdr: video: slow down video, duping frame
Jun 17 21:49:42 MLD user.info vdr: video/vaapi: synced after 83 frames
Jun 17 21:49:42 MLD user.info vdr: video: 15:51:12.734 +119  304   0/\ms  74+2 v-buf
Jun 17 21:49:45 MLD user.info vdr: [2032] VNSI: Requesting clients to reload channel list
^C

Der Upload Code lautet: vcQsV3

Viele Grüße
NoTape

59

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: June 17, 2019, 01:31:23 »

Hallo Pit,

da stimmt etwas nicht, denn das System bootet jetzt nur noch auf die Eingabeaufforderung (Prompt).
Von dort konnte ich aber über "snapshot_manager" auf die vorherige Version zurückgehen.

Viele Grüße
NoTape

60

Allgemein [ General ] / [MLD-5.4 testing] DVB-T2 mit WinTV-dualHD

« on: June 16, 2019, 11:53:59 »

Hallo Pit,

jetzt funktioniert es wieder, wie es vorher war - die Transponder 490, 626MHz fehlen.
Im folgenden Log habe ich vom ZDF (Bild/Ton OK) auf "Das Erste" (kein Bild/Ton) und wieder auf ZDF (Bild/Ton OK) geschaltet.

Code: [Select]

MLD-NUC6i3 /root # tail -f /var/log/messages
Jun 16 11:37:33 MLD user.info vdr: Enabling skin tone filter (pos = 3)
Jun 16 11:37:33 MLD user.info vdr: Allocating 1 forward reference surfaces for postprocessing
Jun 16 11:37:33 MLD user.info vdr: Allocating 0 backward reference surfaces for postprocessing
Jun 16 11:37:34 MLD user.err vdr: Surface 0 query status = 0x6: invalid VASurfaceID
Jun 16 11:37:34 MLD user.info vdr: Changing to 0 forward reference surfaces for postprocessing
Jun 16 11:37:34 MLD user.info vdr: [2060] VNSI: Requesting clients to reload channel list
Jun 16 11:37:35 MLD user.err vdr: video: slow down video, duping frame
Jun 16 11:37:35 MLD user.info vdr: video/vaapi: synced after 83 frames
Jun 16 11:37:35 MLD user.info vdr: video:  8:09:51.011 +119  343   0/\ms  76+2 v-buf
Jun 16 11:37:39 MLD user.info vdr: [2060] VNSI: Requesting clients to reload channel list
Jun 16 11:38:34 MLD user.err vdr: video: slow down video, duping frame
Jun 16 11:38:34 MLD user.info vdr: video:  8:10:49.351 +119  340   0/\ms  76+2 v-buf
Jun 16 11:38:47 MLD user.info vdr: [2011] switching to channel 1 T-8468-2562-769 (Das Erste HD)
Jun 16 11:38:47 MLD user.debug vdr: [3070] osdteletext-receiver thread ended (pid=2011, tid=3070)
Jun 16 11:38:47 MLD user.debug kernel: [  101.171395] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 16 11:38:47 MLD user.debug vdr: [3071] device 1 TS buffer thread ended (pid=2011, tid=3071)
Jun 16 11:38:47 MLD user.debug vdr: [3069] buffer stats: 126900 (2%) used
Jun 16 11:38:47 MLD user.debug vdr: [3069] device 1 receiver thread ended (pid=2011, tid=3069)
Jun 16 11:38:47 MLD user.debug vdr: [2011] buffer stats: 0 (0%) used
Jun 16 11:38:47 MLD user.debug vdr: [3094] osdteletext-receiver thread started (pid=2011, tid=3094, prio=high)
Jun 16 11:38:47 MLD user.debug vdr: [3093] device 1 receiver thread started (pid=2011, tid=3093, prio=high)
Jun 16 11:38:47 MLD user.debug vdr: [3095] device 1 TS buffer thread started (pid=2011, tid=3095, prio=high)
Jun 16 11:38:48 MLD user.err vdr: video: slow down video, duping frame
Jun 16 11:38:48 MLD user.err vdr: video: decoder buffer empty, duping frame (6437/3660) 0 v-buf
Jun 16 11:38:48 MLD user.info vdr: video: --:--:--.---   +0    0   0/\ms   0+0 v-buf
Jun 16 11:38:56 MLD user.info vdr: [2040] frontend 0/0 timed out while tuning to channel 1 (Das Erste HD), tp 490
Jun 16 11:38:56 MLD user.debug kernel: [  175.330719] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 16 11:39:05 MLD user.debug kernel: [  184.392215] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 16 11:39:08 MLD user.info vdr: [2011] switching to channel 6 T-8468-515-2001 (ZDF HD)
Jun 16 11:39:08 MLD user.debug vdr: [3094] osdteletext-receiver thread ended (pid=2011, tid=3094)
Jun 16 11:39:08 MLD user.debug kernel: [  193.404796] dvb_frontend: dvb_frontend_get_frequency_limits: frequency interval: tuner: 42000000...870000000, frontend: 0...0
Jun 16 11:39:09 MLD user.debug vdr: [3095] device 1 TS buffer thread ended (pid=2011, tid=3095)
Jun 16 11:39:09 MLD user.debug vdr: [3093] buffer stats: 0 (0%) used
Jun 16 11:39:09 MLD user.debug vdr: [3093] device 1 receiver thread ended (pid=2011, tid=3093)
Jun 16 11:39:09 MLD user.debug vdr: [3096] device 1 receiver thread started (pid=2011, tid=3096, prio=high)
Jun 16 11:39:09 MLD user.debug vdr: [2011] buffer stats: 0 (0%) used
Jun 16 11:39:09 MLD user.debug vdr: [3097] osdteletext-receiver thread started (pid=2011, tid=3097, prio=high)
Jun 16 11:39:09 MLD user.debug vdr: [3098] device 1 TS buffer thread started (pid=2011, tid=3098, prio=high)
Jun 16 11:39:09 MLD user.info vdr: audio/alsa: using device 'default'
Jun 16 11:39:09 MLD user.err vdr: codec/audio: no frame
Jun 16 11:39:09 MLD user.info vdr: audio/alsa: start delay 336ms
Jun 16 11:39:10 MLD user.info vdr: codec: YUV 420 supported
Jun 16 11:39:10 MLD user.info vdr: Using entrypoint for vpp: 10
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: noise reduction supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50
Jun 16 11:39:10 MLD user.info vdr: Enabling denoise filter (pos = 0)
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: deinterlacing supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: bob deinterlace supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: motion adaptive deinterlace supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: motion compensated deinterlace supported
Jun 16 11:39:10 MLD user.info vdr: Enabling Deint (pos = 1)
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: sharpening supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50
Jun 16 11:39:10 MLD user.info vdr: Enabling sharpening filter (pos = 0)
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: enabling color balance filters
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: Supported color balance filter count: 4
Jun 16 11:39:10 MLD user.info vdr: Hue (-180,00 - 180,00 ++ 1,00 = 0,00) (pos = 2)
Jun 16 11:39:10 MLD user.info vdr: Saturation (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)
Jun 16 11:39:10 MLD user.info vdr: Brightness (-100,00 - 100,00 ++ 1,00 = 0,00) (pos = 2)
Jun 16 11:39:10 MLD user.info vdr: Contrast (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: skin tone enhancement supported
Jun 16 11:39:10 MLD user.info vdr: video/vaapi: 0,00 - 4,00 ++ 1,00 = 0,00
Jun 16 11:39:10 MLD user.info vdr: Enabling skin tone filter (pos = 3)
Jun 16 11:39:10 MLD user.info vdr: Allocating 1 forward reference surfaces for postprocessing
Jun 16 11:39:10 MLD user.info vdr: Allocating 0 backward reference surfaces for postprocessing
Jun 16 11:39:10 MLD user.err vdr: Surface 0 query status = 0x6: invalid VASurfaceID
Jun 16 11:39:10 MLD user.info vdr: Changing to 0 forward reference surfaces for postprocessing
Jun 16 11:39:10 MLD user.info vdr: [2060] VNSI: Requesting clients to reload channel list
Jun 16 11:39:12 MLD user.err vdr: video: slow down video, duping frame
Jun 16 11:39:12 MLD user.info vdr: video/vaapi: synced after 85 frames
Jun 16 11:39:12 MLD user.info vdr: video:  8:11:27.331 +100  421   0/\ms  80+2 v-buf
^C

Einen neuen Upload habe ich auch gemacht - der Upload Code lautet:  wHcgZ9

Nochmals vielen Dank für deine tolle Unterstützung!

Viele Grüße
NoTape