391

Allgemeines [ General ] / Imonlcd-plugin Und Atric-ir Wollen Nicht Zusammen

« on: May 09, 2012, 02:05:26 »

Moin
Wenn ich mein Atric-IR-Einschalter per WebIF...

Lirc Driver: lirc_serial COM1

Lirc call arguments: /dev/ttyS0 uart none

Lirc remote controls: hauppauge/lircd.conf.hauppauge

...einstelle, und dann anlerne ist alles in Butter, FB geht wunderbar - auch nach mehrmaligen reboots.
Wenn ich dann allerdings das Addon imonlcd installiere, funktioniert die FB nicht mehr.
Nach einem reboot kommt nur noch der Anlernbefehl -> Taste drücken....und das wars nach 10 sec. wird abgebrochen und es schaltet zum Fernsehbild.
Mehrmals neu installiert, immer das selbe Ergebnis.
Wenn imonlcd inst. wird, wird auch noch der Parameter lirc_imon übergeben - ist das so richtig?
Ich meine für ein Standard zB. Antecgehäuse mit imonlcd und Empfänger schon, aber nicht in meine Kombi.
Kann man die Plugin inst. und den FB-lirc-Krempel nicht lieber getrennt lassen, oder bringe ich da etwas durcheinander. :huh:

/var/log/messages

May  9 02:13:56 (none) syslog.info syslogd started: BusyBox v1.19.4
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2456]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.err kernel: usb 3-4: can't set config #1, error -32
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2479]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2513]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2526]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2539]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2552]: uid/gid/perm /var/spool/apm.mnt/alsa 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2564]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.info kernel: usb 3-5: new low-speed USB device number 4 using ohci_hcd
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2578]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2595]: uid/gid/perm /var/spool/apm.mnt/xorg 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2611]: uid/gid/perm /var/spool/apm.mnt/xorg-autodetect 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2629]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2652]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2673]: uid/gid/perm /var/spool/apm.mnt/lib-xine 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2692]: uid/gid/perm /var/spool/apm.mnt/lib-pango 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2734]: uid/gid/perm /var/spool/apm.mnt/xorg-nvidia 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2755]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2771]: uid/gid/perm /var/spool/apm.mnt/xineliboutput 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2788]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2806]: uid/gid/perm /var/spool/apm.mnt/mc 0/0/0777, 0/0/0775
May  9 02:13:56 (none) user.warn kernel: aufs test_add:261:mount[2821]: uid/gid/perm /var/spool/apm.mnt/lirc 0/0/0777, 0/0/0775
May  9 02:13:58 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
May  9 02:13:58 (none) user.warn kernel: mount: sending ioctl 5310 to a partition!
May  9 02:13:58 (none) user.notice kernel: XFS (sda2): Mounting Filesystem
May  9 02:13:58 (none) user.info kernel: XFS (sda2): Ending clean mount
May  9 02:14:00 (none) user.info kernel: lirc_dev: IR Remote Control driver registered, major 253
May  9 02:14:00 (none) user.info kernel: lirc_imon: Driver for SoundGraph iMON MultiMedia IR/Display, v0.6
May  9 02:14:00 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
May  9 02:14:00 (none) user.info kernel: lirc_imon: Registered iMON driver (lirc minor: 0)
May  9 02:14:00 (none) user.info kernel: input: iMON PAD IR Mouse (15c2:0038) as /devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input0
May  9 02:14:00 (none) user.info kernel: lirc_imon: iMON device (15c2:0038, intf0) on usb initialized
May  9 02:14:00 (none) user.info kernel: lirc_imon: iMON device (15c2:0038, intf1) on usb initialized
May  9 02:14:00 (none) user.info kernel: usbcore: registered new interface driver lirc_imon
May  9 02:14:00 (none) user.info kernel: forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
May  9 02:14:00 (none) user.warn kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
May  9 02:14:00 (none) user.debug kernel: forcedeth 0000:00:0a.0: setting latency timer to 64
May  9 02:14:00 (none) user.info kernel: forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:0b:e0:f0:00:ed
May  9 02:14:00 (none) user.info kernel: forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
May  9 02:14:01 (none) user.info kernel: lirc_serial: auto-detected active low receiver
May  9 02:14:01 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
May  9 02:14:01 (none) user.info kernel: forcedeth 0000:00:0a.0: eth0: no link during initialization
May  9 02:14:01 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
May  9 02:14:03 (none) user.info kernel: forcedeth 0000:00:0a.0: eth0: link up
May  9 02:14:03 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
May  9 02:14:09 (none) user.info kernel: Linux agpgart interface v0.103
May  9 02:14:09 (none) user.warn kernel: nvidia: module license 'NVIDIA' taints kernel.
May  9 02:14:09 (none) user.warn kernel: Disabling lock debugging due to kernel taint
May  9 02:14:09 (none) user.warn kernel: ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
May  9 02:14:09 (none) user.debug kernel: nvidia 0000:02:00.0: setting latency timer to 64
May  9 02:14:09 (none) user.info kernel: vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
May  9 02:14:09 (none) user.warn kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module  295.33  Sat Mar 17 14:56:23 PDT 2012
May  9 02:14:10 (none) user.info kernel: snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
May  9 02:14:10 (none) user.info kernel: snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
May  9 02:14:10 (none) user.warn kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
May  9 02:14:10 (none) user.info kernel: hda_intel: Disabling MSI
May  9 02:14:10 (none) user.debug kernel: snd_hda_intel 0000:00:07.0: setting latency timer to 64
May  9 02:14:10 (none) user.info kernel: hda_codec: ALC1200: BIOS auto-probing.
May  9 02:14:12 (none) user.info kernel: Linux video capture interface: v2.00
May  9 02:14:12 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
May  9 02:14:12 (none) user.err kernel:    As the driver is backported to an older kernel, it doesn't offer
May  9 02:14:12 (none) user.err kernel:    enough quality for its usage in production.
May  9 02:14:12 (none) user.err kernel:    Use it with care.
May  9 02:14:12 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  9 02:14:12 (none) user.err kernel:    f4d4e7656b26a6013bc5072c946920d2e2c44e8e [media] em28xx: Make em28xx-input.c a separate module
May  9 02:14:12 (none) user.err kernel:    769af2146a93c27c8834dbca54c02cd67468036d [media] em28xx: Change scope of em28xx-input local functions to static
May  9 02:14:12 (none) user.err kernel:    9d9f479b39d58d5b7d9eae1d12b0f9de3c4fc606 [media] em28xx: Move em28xx_register_i2c_ir() to em28xx-input.c
May  9 02:14:12 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
May  9 02:14:12 (none) user.err kernel:    As the driver is backported to an older kernel, it doesn't offer
May  9 02:14:12 (none) user.err kernel:    enough quality for its usage in production.
May  9 02:14:12 (none) user.err kernel:    Use it with care.
May  9 02:14:12 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  9 02:14:12 (none) user.err kernel:    f4d4e7656b26a6013bc5072c946920d2e2c44e8e [media] em28xx: Make em28xx-input.c a separate module
May  9 02:14:12 (none) user.err kernel:    769af2146a93c27c8834dbca54c02cd67468036d [media] em28xx: Change scope of em28xx-input local functions to static
May  9 02:14:12 (none) user.err kernel:    9d9f479b39d58d5b7d9eae1d12b0f9de3c4fc606 [media] em28xx: Move em28xx_register_i2c_ir() to em28xx-input.c
May  9 02:14:12 (none) user.info kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
May  9 02:14:12 (none) user.info kernel: cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
May  9 02:14:12 (none) user.info kernel: cx88[0]: TV tuner type -1, Radio tuner type -1
May  9 02:14:13 (none) user.warn kernel: i2c-core: driver [tuner] using legacy suspend method
May  9 02:14:13 (none) user.warn kernel: i2c-core: driver [tuner] using legacy resume method
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: Hauppauge model 69100, rev B4C3, serial# 7130676
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: MAC address is 00:0d:fe:6c:ce:34
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: tuner model is Conexant CX24118A (idx 123, type 4)
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: audio processor is None (idx 0)
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: decoder processor is CX880 (idx 20)
May  9 02:14:13 (none) user.info kernel: tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
May  9 02:14:13 (none) user.info kernel: cx88[0]: hauppauge eeprom: model=69100
May  9 02:14:13 (none) user.err kernel: IR keymap rc-hauppauge not found
May  9 02:14:13 (none) user.info kernel: Registered IR keymap rc-empty
May  9 02:14:13 (none) user.info kernel: input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:06.2/rc/rc0/input1
May  9 02:14:13 (none) user.info kernel: rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:08.0/0000:01:06.2/rc/rc0
May  9 02:14:13 (none) user.warn kernel: cx88[0]/2: cx2388x 8802 Driver Manager
May  9 02:14:13 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
May  9 02:14:13 (none) user.info kernel: cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 64, mmio: 0xfb000000
May  9 02:14:13 (none) user.info kernel: cx88[1]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1
May  9 02:14:13 (none) user.info kernel: cx88[1]: TV tuner type 4, Radio tuner type -1
May  9 02:14:13 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
May  9 02:14:13 (none) user.err kernel:    As the driver is backported to an older kernel, it doesn't offer
May  9 02:14:13 (none) user.err kernel:    enough quality for its usage in production.
May  9 02:14:13 (none) user.err kernel:    Use it with care.
May  9 02:14:13 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  9 02:14:13 (none) user.err kernel:    f4d4e7656b26a6013bc5072c946920d2e2c44e8e [media] em28xx: Make em28xx-input.c a separate module
May  9 02:14:13 (none) user.err kernel:    769af2146a93c27c8834dbca54c02cd67468036d [media] em28xx: Change scope of em28xx-input local functions to static
May  9 02:14:13 (none) user.err kernel:    9d9f479b39d58d5b7d9eae1d12b0f9de3c4fc606 [media] em28xx: Move em28xx_register_i2c_ir() to em28xx-input.c
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: Hauppauge model 92001, rev B1B1, serial# 247379
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: MAC address is 00:0d:fe:03:c6:53
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: audio processor is CX883 (idx 32)
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: decoder processor is CX883 (idx 22)
May  9 02:14:13 (none) user.info kernel: tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter
May  9 02:14:13 (none) user.info kernel: cx88[1]: hauppauge eeprom: model=92001
May  9 02:14:13 (none) user.err kernel: IR keymap rc-hauppauge not found
May  9 02:14:13 (none) user.info kernel: Registered IR keymap rc-empty
May  9 02:14:13 (none) user.info kernel: input: cx88 IR (Hauppauge Nova-S-Plus  as /devices/pci0000:00/0000:00:08.0/0000:01:07.2/rc/rc1/input2
May  9 02:14:13 (none) user.info kernel: rc1: cx88 IR (Hauppauge Nova-S-Plus  as /devices/pci0000:00/0000:00:08.0/0000:01:07.2/rc/rc1
May  9 02:14:13 (none) user.warn kernel: cx88[1]/2: cx2388x 8802 Driver Manager
May  9 02:14:13 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
May  9 02:14:13 (none) user.info kernel: cx88[1]/2: found at 0000:01:07.2, rev: 5, irq: 19, latency: 64, mmio: 0xf7000000
May  9 02:14:13 (none) user.info kernel: cx88/2: cx2388x dvb driver version 0.0.9 loaded
May  9 02:14:13 (none) user.info kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
May  9 02:14:13 (none) user.info kernel: cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
May  9 02:14:13 (none) user.info kernel: cx88[0]/2: cx2388x based DVB/ATSC card
May  9 02:14:13 (none) user.info kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
May  9 02:14:13 (none) user.info kernel: DVB: registering new adapter (cx88[0])
May  9 02:14:13 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
May  9 02:14:13 (none) user.info kernel: cx88[1]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
May  9 02:14:13 (none) user.info kernel: cx88[1]/2: cx2388x based DVB/ATSC card
May  9 02:14:13 (none) user.info kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
May  9 02:14:13 (none) user.info kernel: CX24123: detected CX24123
May  9 02:14:13 (none) user.info kernel: DVB: registering new adapter (cx88[1])
May  9 02:14:13 (none) user.warn kernel: DVB: registering adapter 1 frontend 0 (Conexant CX24123/CX24109)...
May  9 02:14:14 (none) user.info kernel: cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
May  9 02:14:14 (none) user.info kernel: cx24116_firmware_ondemand: Waiting for firmware upload(2)...
May  9 02:14:14 (none) user.debug kernel: eth0: no IPv6 routers present
May  9 02:14:19 (none) user.info kernel: cx24116_load_firmware: FW version 1.23.86.1
May  9 02:14:19 (none) user.info kernel: cx24116_firmware_ondemand: Firmware upload complete
May  9 02:14:19 (none) user.info kernel: lirc_imon: IR port opened
May  9 02:14:35 (none) user.info kernel: bootsplash: status on console 0 changed to on
May  9 04:14:35 (none) auth.info login[11452]: root login on 'tty1'
May  9 04:14:35 (none) auth.info login[11453]: root login on 'tty2'
May  9 04:14:35 (none) auth.info login[11461]: root login on 'tty3'
May  9 04:14:35 (none) auth.info login[11469]: root login on 'tty4'
May  9 04:15:18 (none) user.err vdr: [5006] ERROR: lircd connection broken, trying to reconnect every 3.0 seconds
May  9 02:15:18 (none) user.info kernel: lirc_imon: IR port closed
May  9 02:15:19 (none) user.info kernel: lirc_serial: auto-detected active low receiver
May  9 02:15:19 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
May  9 02:15:21 (none) user.info kernel: lirc_imon: IR port opened
May  9 04:20:26 (none) user.err vdr: [5006] ERROR: lircd connection broken, trying to reconnect every 3.0 seconds
May  9 02:20:26 (none) user.info kernel: lirc_imon: IR port closed
May  9 02:20:27 (none) user.info kernel: lirc_serial: auto-detected active low receiver
May  9 02:20:27 (none) user.info kernel: lirc_dev: lirc_register_driver: sample_rate: 0
May  9 02:20:29 (none) user.info kernel: lirc_imon: IR port opened

lsmod sagt mir->
lirc_imon   17861 0
lirc_dev       8319 5 lirc_serial,lirc_imon

...obwohl ich eigentlich nur lirc_serial COM1 gewählt hab.
 
Hat jemand einen Tip für mich ?

MFG
Andre

392

Allgemeines [ General ] / Fb Der Nova-s2-hd Und Ein Paar Kleinigkeiten

« on: May 08, 2012, 12:30:16 »

Moin
Wegen dem FB Krempel las ich mal die Finger von, vlt tut sich da demnächst noch was;-)

WakeonLan ->Okay, sehen den Wald vor lauter Bäumen nicht, hab`s aber doch noch gefunden.
Es gibt im WebIf aber auch so viele Schalter;-)

Und wegen den anderen Sachen mach ich lieber einen eigenen Fred auf.

Danke für die mühe, für einen Blinden.

MFG
Andre

393

Entwicklung [ Development ] / Und Es Geht Doch (udev):-)

« on: May 08, 2012, 12:24:22 »

Hallo
Sorry das ich mich hier als Neuling einmische...

@clausmuus hast`ne PN

@wino
Bist Du der wino aus dem easyvdr....
...hatte nach der ganzen Aktion auch ein wenig bauchschmerzen...
...wenn ja, dann ist es schön dich mal wieder zu sehen;-)



MFG
Andre oder auch Uhlstone;-)

394

Allgemeines [ General ] / Fb Der Nova-s2-hd Und Ein Paar Kleinigkeiten

« on: May 07, 2012, 20:37:55 »

Moin
Erstmal ein dickes Lob an das MDL-Team.
Suuper Arbeit, und Danke das ihr mich freigeschaltet habt.

Ich hatte bisher easyvdr 0.8 und MDL 3.0 ist schon etwas anders (auch vom Aufbau), da muß man sich erst mal zurecht finden.  :huh:
Hab mir MDL-3.0 gestern installiert und läuft bis jetzt immer noch rund...
Das Design und das WebIF ist ja richtig gelungen... :applaus

Aber ein paar Sachen hab ich aber doch noch.

1.Mit meiner FB an einer Hauppauge Nova-S2-HD und dem remote-Plugin da stehe ich noch auf Kriegsfuß.
Bei easy mußte ich noch ein
KERNELS=="input*", ATTRS{name}=="cx88 IR (Hauppauge WinTV-HVR400"; SYMLINK+="input/Nova-S2-HD"
in die /etc/udev/rules.d/10-dvb-remote.rules hinzufügen.

Und noch ein Eintrag in die  /etc/vdr/sysconfig
   REMOTEPARAM="-i /dev/input/Nova-S2-HD"

Hab aber leider kein Verzeichnis udev gefunden. Das macht ihr wahrscheinlich anders.
- Hab erst mal lirc mit meinem Atric in Betrieb genommen.
Das macht mit XBMC ja auch erst mal mehr Sinn.

2.Bei easy gab es ein Verzeichnis wo man Befehle rein schreiben konnte, die dann beim Start abgearbeitet worden sind.
Hintergrund ist -> möchte mein NAS (Openmediavault) Automatisch per "wakeonlan xx:xx:xx..." starten wenn VDR startet.
Und eventuell auch ein Eintrag, zum manuellen starten in die commands.conf, wobei den Eintrag hab ich auch noch nicht gefunden. :unsure:
Wo kann ich da was drehen ?

3. Wie kann ich wakeonlan installieren ? Einfach mit apt-get install ?

Ja, Ok, so viele Fragen in einem Fred ist nicht schick, aber ich gelobe Besserung.

MFG
Andre