MLD-5.x > General

(MLD 5.4 testing) kernel 5.3.5.202.31 amd64

(1/10) > >>

gr4vity:
Hello,

Where i can find linux-headers-5.3.5.202.31?
As i want to install a module that i use frequently on pc (for ex. vtuner) on MLD distro but i can't because it won't work (error message invalid module format).

I was thinking about using my pc kernel on MLD then copied the modules directory and some of the boot files then ended up with boot failure.

I restored the boot files however MLD HD screen will hang up for 3-4 minutes then it will start booting normally, how i can solve that issue?

Best regards.

clausmuus:
Why du you want to build the vtuner modul? If you use the VDR, you can use the satip plugin and do not need the vtuner modul.

The problem with the vtuner and the 5.3 kernel ist, that I don't know about vtuner sources for that.
But if you realy want to build the modul, you can find a documentation on how to set up a MLD development enviroment and how to build MLD packages in the MLD wiki.

gr4vity:
Thanks clausmuus for replying,
I have a problem with VDR satip, it doesn't work properly with diseqc although it works fine when i compiled it on Raspberry pi using raspbian not MLD.

Actually, i want to use my custom kernel which supports blindscan.
It's not just a module i want to build.
MLD kernel 5.3 shows SNR like this
Lock   (0x1f) Signal= 58.00% C/N= 27.40% postBER= 0
Lock   (0x1f) Signal= 58.00% C/N= 27.20% postBER= 0
Lock   (0x1f) Signal= 58.00% C/N= 27.00% postBER= 0

Which is not correct, it should be 70%
In fact it should be shown in dB not %
My custom kernel supports showing SNR in dB as well.

Is it possible to build the whole kernel for MLD?

gr4vity:

--- Quote from: gr4vity on October 19, 2019, 16:11:51 ---I restored the boot files however MLD HD screen will hang up for 3-4 minutes then it will start booting normally, how i can solve that issue?

--- End quote ---

What about that problem?
MLD HD screen will be displayed for 3-4 minutes no matter if i selected quiet, verbose or snapshots.
Then it will continue booting normally.
Is there anyway to fix that?
I reinstalled syslinux but the problem wasn't solved.


There is another issue i want to report,
grab shows screenshots in negative colors as in the attachment.
Is that a known issue?

clausmuus:
It is necessary to aktivate some kernel settings for the MLD. Fer example you must build in the btrfs file system. Also the kernel must support lzma kompressed initramfs. A full list of special settings is here: http://minidvblinux.de/git/?a=viewblob&p=kernel&h=ea3261971571e0820cf5d1b90aebedea066da131&hb=dfe88b033d796c5a60390f5c1dcf054a2f81297a&f=src/README
Also you can find the MLD kernel konfig file here: http://minidvblinux.de/git/?a=viewblob&p=kernel&h=c5ebcda89324a8bd212458b63a0570cf822b232b&hb=dfe88b033d796c5a60390f5c1dcf054a2f81297a&f=src/linux.config.x86

The problem with the colors are known. This is an issue of some grafic cards.

I don't know the problem of your restored MLD kernel. But you sould be able to boot the snapshot boot option and than restore an older version. Also you can boot an MLD USB Image and select there the snapsoh tool in the bootloader and also in the web interface.

Navigation

[0] Message Index

[#] Next page