MLD-5.x > General

[MLD 5.4 testing] Startet nicht mehr

(1/1)

ratata:
Hallo zusammen,

trotzdem ich mehrere Snapshots zurückgespielt habe, hängt mein Rechner immer noch bei der Anzeige MLD-HD

per SSH meldet sich das System nur noch mit


--- Code: ---noname>
--- End code ---

/var/log/messages
/var/log/sysinit

sind leer

/var/log/vdr wiederholt ständig

--- Code: ---ERROR[burn]: no targets left, check --dvd and --iso parameters
VDR exits at Fr Feb  8 12:36:45 CET 2019

--- End code ---

der Rest ist unauffällig.

Was kann ich tun?!

rfehr:
Hi,

deinstalliere mal das burn-plugin.

Gruß,
  Roland

clausmuus:
Ist die System Festplatte voll?

ratata:
OK, und Danke!

nach

--- Code: ---noname> apt remove --purge vdr-plugin-burn
E: Malformed entry 2 in list file /etc/apt/sources.list.d/main.list (Component)
E: The list of sources could not be read.
E: Malformed entry 2 in list file /etc/apt/sources.list.d/main.list (Component)
E: The list of sources could not be read.

--- End code ---
und ändern der main.list von

--- Code: ---deb http://www.minidvblinux.de/download//files  main 
nach
deb http://www.minidvblinux.de/download/5.4/files testing main
--- End code ---

meldet das System

--- Code: ---noname> apt remove --purge vdr-plugin-burn
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following package was automatically installed and is no longer required:
  imagemagick
Use 'apt autoremove' to remove it.
The following packages will be REMOVED:
  vdr-plugin-burn*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 3.600 kB disk space will be freed.
Do you want to continue? [Y/n]
sh: 1: unknown operand
(Reading database ... 25433 files and directories currently installed.)
Removing vdr-plugin-burn (0.3.0-12+2.4.0.217.7) ...
sh: 1: unknown operand
sh: 1: unknown operand
sh: 1: unknown operand
sh: 1: unknown operand
(Reading database ... 25388 files and directories currently installed.)
Purging configuration files for vdr-plugin-burn (0.3.0-12+2.4.0.217.7) ...
sh: 1: unknown operand
sh: 1: unknown operand
sh: 1: unknown operand

--- End code ---

startet das System bis "softhddevice" (also weiter als vorher?!)


--- Code: ---noname> apt update
>>>> sh: 1: unknown operand  <<<<
Get:1 http://www.minidvblinux.de/download/5.4/files testing InRelease [2.396 B]
Fetched 2.396 B in 0s (8.267 B/s)   
>>>> sh: 1: unknown operand <<<<
Reading package lists... Done
Building dependency tree       
Reading state information... Done
All packages are up to date.

--- End code ---

Vermutlich wurde kein Snapshot zurückgespielt, wenn alle Pakete aktuell sind? Wenn ich das übers webif neu versuche wird die Verbindung zum MLD unterbrochen.

Hilflos
ratata

Nachtrag: Speichersituation ist prekär

--- Code: ---noname> df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 9.3G      4.8G      3.8G  56% /
tmp                       3.5G     12.0K      3.5G   0% /tmp
run                       3.5G    376.0K      3.5G   0% /run
dev                       3.5G         0      3.5G   0% /dev
log                       3.5G     64.0K      3.5G   0% /var/log
/dev/sda3               102.3G    210.6M    102.1G   0% /mnt/sda3
a3:b1                     1.9T      1.8T    102.1G  95% /data
/dev/sda3               102.3G    210.6M    102.1G   0% /var/cache
/dev/sda1                94.5M     15.3M     79.2M  16% /boot
/dev/sdb1                 1.8T      1.8T     24.0K 100% /media/Intern-LW1
/dev/sdb1                 1.8T      1.8T     24.0K 100% /mnt/sdb1

--- End code ---

Werde einige ältere Snapshots manuell löschen, melde mich dann wieder! Danke euch!

Nachtrag,
Snapshots gelöscht, keine Veränderung

ratata:
hi, nochmal dank an alle!

Habe jetzt aus dem letzten Snapshot die leere /etc/rc.config überschrieben, nun geht's wieder!

Gruß
ratata

Navigation

[0] Message Index