Others > Hardware

TechniSat SkyStar 2 eXpress HD Treiber

(1/3) > >>

gr4vity:
Hallo,
Zu Beginn,
Es tut mir leid .. ich spreche kein Deutsch.  :(
Das Problem ist, ich habe technisat skystar Express hd TV-Karte, die perfekt funktioniert mit Crazycat media_build auf Ubuntu Kernel 4.8.15
Jedoch ich habe ein Problem mit dvb-mbe Treiber auf MLD

Die Signalstärke und -qualität sind umgekehrt.
Überprüfen Sie den Anhang

Außerdem gibt es viele Kanäle, die nicht abgestimmt sind, einschließlich 4K-Kanäle.

Ist es möglich, dass Sie Crazycat media_build kompilieren und zum Download bereitstellen?

Freundliche Grüße.

clausmuus:
Hi,

hast Du es schon mit der MLD-5.4 versucht?

Claus

MarMic:
Hi gr4vity,

Welcome!

It is ok for us if you ask your question in English. We will answer it also in English.

If your problem is just the drawing of the signal strength and quality than it is not a problem.
The signal strength is just a value in the driver. So if one driver is written to show you 0 to 100 and the other one is written to show you 0 to 1000 the signal quality shown is 10% of the real value for the second card.
This depends on the program that interpret the signal value. Maybe it needs 0 to 10000

Digital is 0 and 1 so if you have a non artifact picture everything is ok!

Best regards

MarMic

gr4vity:

--- Quote from: clausmuus on January 08, 2018, 20:25:13 ---Hi,

hast Du es schon mit der MLD-5.4 versucht?

Claus

--- End quote ---

Hi Claus, thank you for replying,
Actually, i encounter that problem with MLD-5.3 stable 64Bit PC.
After that i added MLD-5.4 link to the sources list then upgraded the kernel and dvb-mbe driver (which might not right to do so)however i still face the same problem.
Then i went back to MLD-5.3

Best regards
gr4vity

gr4vity:

--- Quote from: MarMic on January 08, 2018, 21:06:58 ---Hi gr4vity,

Welcome!

It is ok for us if you ask your question in English. We will answer it also in English.

If your problem is just the drawing of the signal strength and quality than it is not a problem.
The signal strength is just a value in the driver. So if one driver is written to show you 0 to 100 and the other one is written to show you 0 to 1000 the signal quality shown is 10% of the real value for the second card.
This depends on the program that interpret the signal value. Maybe it needs 0 to 10000

Digital is 0 and 1 so if you have a non artifact picture everything is ok!

Best regards

MarMic

--- End quote ---

Hi MarMic, thank you ... i'm really glad that you guys had approved my account  :)

The problem is the signal strength and quality are reversed, if you check the attachment the less value should be on top and the greater value should be on the bottom.

I intend to use those values to align my antenna, now it's very confusing.

The other part of the problem is there is no signal lock for many channels including 4K channels which works fine with Carzycat media_build.

Is it possible to transfer kernel/driver files from Ubuntu to MLD?

Best regards
gr4vity

Navigation

[0] Message Index

[#] Next page