MLD-5.x > Development
Test mit 5.4/64Bit Unstable auf Asrock Q9100M mit Intel VGA
Matthias:
Komplett neue Installation
Matthias:
Test von TVGuideNG.
Läßt sich nicht aus dem OSD heraus starten.
vdr-plugin-tvguideng 2016.03.13-4.1+2.3.8.214.41
--- Code: ---Nov 23 11:58:48 MyMLD user.err vdr: [8711] tvguideng: skindesigner not available but mandatorily needed - aborting
Nov 23 11:58:49 MyMLD user.err vdr: [8711] tvguideng: closing
Nov 23 11:58:58 MyMLD user.err vdr: [8711] tvguideng: skindesigner not available but mandatorily needed - aborting
Nov 23 11:58:59 MyMLD user.err vdr: [8711] tvguideng: closing
--- End code ---
ist aber auch schon eine Zeitlang her das das Jemand dran war.
--- Code: ---Version 4.1 at 2017-06-04 by Andreas McPherson
fix compile error with VDR >=2.3.5
--- End code ---
Matthias:
Wenn ich im OSD auf System/System Setup gehe lande ich immer in Webif/System.
Das ist sicherlich nicht Absicht.
Matthias:
Ich nutze Lirc (an COM1)
In der messages tauchen eigenwillige Fehlermeldungen auf, die ich so in der Vergangenheit noch nicht beobachtet habe:
--- Code: ---Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: lircd: Opening log, level: Info
Nov 23 11:55:05 MyMLD local0.warn lircd-0.10.0[27743]: Warning: Running as root
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: Hauppauge.
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: hauppauge_pvr.
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: Hauppauge_350.
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_350: Multiple definitions of: KEY_CHANNELDOWN
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_350: Multiple definitions of: KEY_REWIND
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: Hauppauge_WinTV_Nexus-S.
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple definitions of: KEY_RECORD
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple definitions of: KEY_BACK
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple values for same code: KEY_BACK
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple definitions of: KEY_RECORD
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple values for same code: KEY_RECORD
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple definitions of: KEY_PAUSE
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge_WinTV_Nexus-S: Multiple values for same code: KEY_PAUSE
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: Hauppauge.
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge: Multiple definitions of: KEY_CHANNELDOWN
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge: Multiple values for same code: KEY_SUBTITLE
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge: Multiple values for same code: KEY_TEXT
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27743]: Notice: /etc/lircd.conf: Hauppauge: Multiple values for same code: KEY_HOME
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27743]: Info: Using remote: Hauppauge_MVP.
Nov 23 11:55:05 MyMLD local0.warn lircd-0.10.0[27743]: Warning: Duplicate remotes "Hauppauge" found, problems ahead
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27775]: Notice: lircd(default) ready, using /var/run/lirc/lircd-COM1
Nov 23 11:55:05 MyMLD local0.notice lircd-0.10.0[27775]: Notice: accepted new client on /var/run/lirc/lircd-COM1
Nov 23 11:55:05 MyMLD local0.info lircd-0.10.0[27775]: Info: [lirc] protocol is enabled
Nov 23 11:55:05 MyMLD user.info kernel: [ 7697.684267] input: lircd as /devices/virtual/input/input19
Nov 23 11:55:08 MyMLD local0.info lircd-0.10.0[30162]: Info: lircd: Opening log, level: Info
Nov 23 11:55:08 MyMLD local0.notice lircd-0.10.0[30162]: Notice: Version: lircd 0.10.0
--- End code ---
Meine lircd.conf:
Spoiler (show / hide)#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner@gmx.net>
#
# brand: Hauppauge
# model:
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#
#
# this config file was automatically generated
# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR 2/350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
repeat_bit 2
begin codes
KEY_PVR 0x00000000000017BB
KEY_POWER2 0x00000000000017BD # Was: Power
KEY_TV 0x000000000000179C # Was: TV
KEY_VIDEO 0x0000000000001798 # Was: Videos
KEY_AUDIO 0x0000000000001799 # Was: Music
KEY_IMAGES 0x000000000000179A # Was: Pictures
KEY_INFO 0x000000000000178D # Was: Guide
KEY_RADIO 0x000000000000178C # Was: Radio
KEY_UP 0x0000000000001794 # Was: Up
KEY_LEFT 0x0000000000001796 # Was: Left
KEY_RIGHT 0x0000000000001797 # Was: Right
KEY_DOWN 0x0000000000001795 # Was: Down
KEY_OK 0x00000000000017A5 # Was: OK
KEY_ESC 0x000000000000179F # Was: Back/Exit
KEY_MENU 0x000000000000179B
KEY_VOLUMEUP 0x0000000000001790 # Was: Vol+
KEY_VOLUMEDOWN 0x0000000000001791 # Was: Vol-
KEY_MUTE 0x000000000000178F # Was: Mute
KEY_CHANNELUP 0x00000000000017A0 # Was: Ch+
KEY_CHANNELDOWN 0x00000000000017A1 # Was: Ch-
KEY_RECORD 0x00000000000017B7 # Was: Record
KEY_STOP 0x00000000000017B6 # Was: Stop
KEY_PLAY 0x00000000000017B5 # Was: Play
KEY_FORWARD 0x00000000000017B4 # Was: Forward
KEY_REWIND 0x00000000000017A4
KEY_PAUSE 0x00000000000017B0 # Was: Pause
KEY_NEXT 0x000000000000179E
KEY_1 0x0000000000001781 # Was: 1
KEY_2 0x0000000000001782 # Was: 2
KEY_3 0x0000000000001783 # Was: 3
KEY_4 0x0000000000001784 # Was: 4
KEY_5 0x0000000000001785 # Was: 5
KEY_6 0x0000000000001786 # Was: 6
KEY_7 0x0000000000001787 # Was: 7
KEY_8 0x0000000000001788 # Was: 8
KEY_9 0x0000000000001789 # Was: 9
Asterix 0x000000000000178A
KEY_0 0x0000000000001780 # Was: 0
KEY_NUMERIC_POUND 0x000000000000178E # Was: #
KEY_RED 0x000000000000178B # Was: Red
KEY_GREEN 0x00000000000017AE # Was: Green
KEY_YELLOW 0x00000000000017B8 # Was: Yellow
KEY_BLUE 0x00000000000017A9 # Was: Blue
end codes
end remote
MarMic:
Moin,
Wieso wurde bei den Tests vorher xorg-intel genommen? Wenn du verbose bootest was steht in der xorg Auswahl?
@claus: xorg-autodetect aktualisiert nach dem Fehler?
Das du ins webif kommst ist normal. Der VDR hat keinen Möglichkeit mehr Setup im osd auszuführen. Dazu wurde die mld gezwungen.
Funktioniert dein lirc? Und es sind nur mehr Meldungen? Es ist ne deutlich neuere lirc Version da sind Meldungen im!
Hast du serial am laufen? Und das geht dann also endlich?
Bei TV Guide wie auch immer steht doch das Ski Designer fehlt.
Danke fürs Testen - mach aber Mal ein debuggen thread auf
Gruß
MarMic
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version