MLD-5.x > Development
Test mit 5.4/64Bit Unstable auf Asrock Q9100M mit Intel VGA
MarMic:
danach nehme ich auch nen Debug-Log
mafe68:
Habe jetzt die 20-intel.conf von Frank so wie sie war in die /etc/X11/xorg.conf.d/ geschoben und dann einen reboot gemacht. Jetzt komme ich nur mehr in die Konsole aber der Ton läuft.
Und hier noch der Debug-Log: brUL24
MarMic:
du musst den ordner weg machen!
z.B. mv /etc/X11/xorg.conf.d /etc/X11/xorg.conf.old
und dann die fnu xorg.conf nach
/etc/X11/ legen
glaube ich
gruß
MarMic
mafe68:
Habe mir mal die 20-intel.conf angesehen nur darin steht bei der CPU
--- Code: ---Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "Intel(R) Corporation"
BoardName "Haswell (gen7.5, gt2)"
EndSection
--- End code ---
nur meine CPU ist kein Haswell sonder ein Celleron
--- Code: ---MLD> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
stepping : 3
microcode : 0x321
cpu MHz : 2417.047
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs :
bogomips : 3998.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
stepping : 3
microcode : 0x321
cpu MHz : 2416.917
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs :
bogomips : 4006.28
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
stepping : 3
microcode : 0x321
cpu MHz : 2422.740
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs :
bogomips : 4006.88
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
stepping : 3
microcode : 0x321
cpu MHz : 2423.377
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs :
bogomips : 4007.18
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
--- End code ---
Da passt das ja auch dann nicht zusammen. Gehört da dann nicht das so rein geschrieben?
--- Code: ---Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "Intel(R) Corporation"
BoardName "Celeron (gen6)"
EndSection
--- End code ---
MarMic:
ist wurst! lief bei p3f auch! hast du das mv gemacht?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version