MLD-5.x > General
[5.4-Testing] Debugen von Hoher Load
MarMic:
ist gemacht!
sag mal sehen bei euch die interupt zahlen auch so hoch aus bei nvdidia?
--- Code: ---cat /proc/interrupts
CPU0 CPU1
0: 20 0 IO-APIC 2-edge timer
1: 9 2 IO-APIC 1-edge i8042
8: 0 0 IO-APIC 8-edge rtc0
9: 0 0 IO-APIC 9-fasteoi acpi
14: 0 0 IO-APIC 14-edge platform[pata_legacy.0]
15: 0 0 IO-APIC 15-edge platform[pata_legacy.1]
16: 1540805 771127 IO-APIC 16-fasteoi ehci_hcd:usb1, ehci_hcd:usb3, ohci_hcd:usb7, nvidia
17: 810022 64201 IO-APIC 17-fasteoi ehci_hcd:usb4, ohci_hcd:usb8, snd_hda_intel:card1
18: 0 0 IO-APIC 18-fasteoi ehci_hcd:usb5, ohci_hcd:usb9, i801_smbus
19: 0 0 IO-APIC 19-fasteoi ehci_hcd:usb6, ohci_hcd:usb10
23: 26 3 IO-APIC 23-fasteoi ehci_hcd:usb2
24: 2813 749 PCI-MSI 512000-edge ahci[0000:00:1f.2]
25: 0 0 PCI-MSI 1572864-edge ahci[0000:03:00.0]
26: 0 0 PCI-MSI 327680-edge xhci_hcd
27: 1761 207 PCI-MSI 2097152-edge eth0
28: 331 96 PCI-MSI 442368-edge snd_hda_intel:card0
NMI: 0 0 Non-maskable interrupts
LOC: 596953 596891 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 1 0 APIC ICR read retries
RES: 6198 6450 Rescheduling interrupts
CAL: 300 306 Function call interrupts
TLB: 236 202 TLB shootdowns
ERR: 0
MIS: 0
PIN: 0 0 Posted-interrupt notification event
PIW: 0 0 Posted-interrupt wakeup event
--- End code ---
uptime 8minuten
HagenS:
So siehts bei mir aus:
--- Code: ---video> uptime
17:08:03 up 6 min, load average: 1.75, 1.50, 0.73
video> cat /proc/interrupts
CPU0 CPU1
0: 35 0 IO-APIC 2-edge timer
1: 3 0 IO-APIC 1-edge i8042
8: 0 0 IO-APIC 8-edge rtc0
9: 0 0 IO-APIC 9-fasteoi acpi
12: 4 0 IO-APIC 12-edge i8042
14: 0 0 IO-APIC 14-fasteoi platform[pata_legacy.0]
15: 0 0 IO-APIC 15-edge platform[pata_legacy.1]
16: 0 0 IO-APIC 16-fasteoi i801_smbus
17: 13999 2729 IO-APIC 17-fasteoi snd_hda_intel:card0
120: 98957 30720 PCI-MSI 376832-edge ahci[0000:00:17.0]
121: 103795 21226 PCI-MSI 327680-edge xhci_hcd
122: 87663 25351 PCI-MSI 1048576-edge ddbridge
123: 10915 2549 PCI-MSI 520192-edge eth0
124: 46798 9606 PCI-MSI 524288-edge nvidia
NMI: 0 0 Non-maskable interrupts
LOC: 390287 390227 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 1 0 APIC ICR read retries
RES: 54160 70561 Rescheduling interrupts
CAL: 465 636 Function call interrupts
TLB: 340 506 TLB shootdowns
ERR: 23
MIS: 0
PIN: 0 0 Posted-interrupt notification event
PIW: 0 0 Posted-interrupt wakeup event
video>
--- End code ---
...Hagen
MarMic:
hmm das ist ohne NVreg_EnableMSI=0. das sieht man daran das PCI-MSI bei nvidia aktiv ist.
aber meine interrupts sind schon enorm.
vielen dank für deinen post
HagenS:
Ja - natürlich ohne. Ich dachte, Du wolltest einen Vergleich haben ;)
MarMic:
Hi Andy,
hat nix gebracht! eben der vdr wieder in die Knie
Load average: 1.54 1.10 0.93 2/192 3457 UND STEIGEND
--- Code: ---[ 4577.998232] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 4577.998235] CPU: 0 PID: 3396 Comm: mount.mergerfs Tainted: P O 4.8.15.198.3 #1
[ 4577.998236] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B75 Pro3-M, BIOS P1.90 12/24/2013
[ 4577.998238] 0000000000000000 ffffffff813010b7 ffff88011d35c600 ffff88011d35c69c
[ 4577.998240] ffffffff8106aa79 ffff88011d35c600 0000000000000000 0000000000000000
[ 4577.998242] ffff88011d35c600 ffffffff8106ad1d ffff88011d35c600 0000000000000000
[ 4577.998243] Call Trace:
[ 4577.998244] <IRQ> [<ffffffff813010b7>] ? dump_stack+0x46/0x59
[ 4577.998251] [<ffffffff8106aa79>] ? __report_bad_irq+0x36/0xb0
[ 4577.998252] [<ffffffff8106ad1d>] ? note_interrupt+0x19a/0x222
[ 4577.998254] [<ffffffff81068bba>] ? handle_irq_event_percpu+0x39/0x3f
[ 4577.998256] [<ffffffff81068be2>] ? handle_irq_event+0x22/0x43
[ 4577.998258] [<ffffffff8106b507>] ? handle_fasteoi_irq+0x75/0xcb
[ 4577.998260] [<ffffffff81013f98>] ? handle_irq+0x11/0x17
[ 4577.998261] [<ffffffff81013a9f>] ? do_IRQ+0x40/0xba
[ 4577.998264] [<ffffffff815c317f>] ? common_interrupt+0x7f/0x7f
[ 4577.998427] [<ffffffffa04210d0>] ? _nv008900rm+0x10b0/0x5c10 [nvidia]
[ 4577.998429] [<ffffffff81039780>] ? __do_softirq+0x6c/0x1bb
[ 4577.998430] [<ffffffff8102732f>] ? ioapic_ack_level+0x6b/0x103
[ 4577.998432] [<ffffffff810399f9>] ? irq_exit+0x33/0x3f
[ 4577.998433] [<ffffffff81013b03>] ? do_IRQ+0xa4/0xba
[ 4577.998435] [<ffffffff815c317f>] ? common_interrupt+0x7f/0x7f
[ 4577.998436] <EOI> [<ffffffff810d2703>] ? kmem_cache_alloc+0x86/0x95
[ 4577.998443] [<ffffffff8122cc75>] ? kmem_zone_alloc+0x6e/0xc6
[ 4577.998444] [<ffffffff8122c669>] ? xfs_trans_alloc+0x7e/0xee
[ 4577.998446] [<ffffffff81221713>] ? xfs_vn_update_time+0x35/0xca
[ 4577.998449] [<ffffffff810ea4b3>] ? file_update_time+0xa6/0xc8
[ 4577.998451] [<ffffffff8121aa15>] ? xfs_file_aio_write_checks+0x14a/0x160
[ 4577.998452] [<ffffffff8121ace5>] ? xfs_file_buffered_aio_write+0x5c/0x18b
[ 4577.998455] [<ffffffff811cfaac>] ? fuse_dev_read+0x53/0x58
[ 4577.998456] [<ffffffff8121ae9b>] ? xfs_file_write_iter+0x87/0xfa
[ 4577.998458] [<ffffffff810d5d99>] ? __vfs_write+0xc9/0xf1
[ 4577.998459] [<ffffffff810d66fb>] ? vfs_write+0xc6/0x149
[ 4577.998461] [<ffffffff810d73ad>] ? SyS_pwrite64+0x5b/0x78
[ 4577.998462] [<ffffffff815c285b>] ? entry_SYSCALL_64_fastpath+0x13/0x8f
[ 4577.998463] handlers:
[ 4577.998465] [<ffffffff8144f6a6>] usb_hcd_irq
[ 4577.998466] [<ffffffff8144f6a6>] usb_hcd_irq
[ 4577.998467] [<ffffffff8144f6a6>] usb_hcd_irq
[ 4577.998557] [<ffffffffa06a4930>] nvidia_isr [nvidia]
[ 4577.998558] Disabling IRQ #16
[ 4577.999807] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 4577.999816] clocksource: 'acpi_pm' wd_now: 2be64e wd_last: a44918 mask: ffffff
[ 4577.999817] clocksource: 'tsc' cs_now: ad3e88a5eac cs_last: ad268a26b9e mask: ffffffffffffffff
[ 4578.000273] clocksource: Switched to clocksource acpi_pm
--- End code ---
so ich stelle mal zurück auf spdig und rm /etc/mod.../nvidia.conf
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version