MLD-5.x > x86 Systeme (PC)
[5.3] Nicht alle Tuner werden erkannt.
TimUx:
So,
ich habe mal ein BIOS Update durchgeführt.
Jetzt werde ich mal 5.3 Stable als Live Stick starten, mal sehen ob die ACPI Probleme behoben sind.
Falls ja, schaue ich mir die Tuner an.
Sollte alles gut sein, werde ich noch einmal ein Upgrade auf 5.3 Stabel versuchen und owncloud aus 5.4 installieren.
Gruß Timo
TimUx:
OK,
die ACPI Probleme sind nach dem BIOS Update behoben.
Zwei Tuner werden nachwievor nicht erkannt.
Ich habe mal unter verschiedenen Konstellationen Debug Logs gezogen.
5.3 dvb
QYCCLl
5.3 dvb-mb
PVxWX2
5.1 dvb-mbe
PF90ZJ
Gruß Timo
TimUx:
Dazu noch ein paar weitere Infos, falls Bedarf ist.
MLD 5.3 dvb
--- Code: ---server> dmesg
[ 10.203257] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
[ 10.203358] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.203369] HW 0001000d FW 00010004
[ 10.204889] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 10.205179] Port 0 (TAB 1): DUAL DVB-S2
[ 10.205894] Port 1 (TAB 2): NO MODULE
[ 10.206522] Port 2 (TAB 3): NO MODULE
[ 10.207308] Port 3 (TAB 4): NO MODULE
[ 10.207430] DVB: registering new adapter (DDBridge)
[ 10.359874] LNBx2x attached on addr=a
[ 10.360886] stv6110x_attach: Attaching STV6110x
[ 10.360888] attach tuner input 0 adr 60
[ 10.360891] DDBridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 10.360938] DVB: registering new adapter (DDBridge)
[ 10.400952] LNBx2x attached on addr=8
[ 10.400955] stv6110x_attach: Attaching STV6110x
[ 10.400956] attach tuner input 1 adr 63
[ 10.400959] DDBridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 10.401197] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.401208] HW 0001000d FW 00010004
[ 10.203358] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.203369] HW 0001000d FW 00010004
[ 10.204889] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 10.205179] Port 0 (TAB 1): DUAL DVB-S2
[ 10.205894] Port 1 (TAB 2): NO MODULE
[ 10.206522] Port 2 (TAB 3): NO MODULE
[ 10.207308] Port 3 (TAB 4): NO MODULE
[ 10.207430] DVB: registering new adapter (DDBridge)
[ 10.359874] LNBx2x attached on addr=a
[ 10.360886] stv6110x_attach: Attaching STV6110x
[ 10.360888] attach tuner input 0 adr 60
[ 10.360891] DDBridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 10.360938] DVB: registering new adapter (DDBridge)
[ 10.400952] LNBx2x attached on addr=8
[ 10.400955] stv6110x_attach: Attaching STV6110x
[ 10.400956] attach tuner input 1 adr 63
[ 10.400959] DDBridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 10.401197] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.401208] HW 0001000d FW 00010004
[ 10.402441] Port 0 (TAB 1): DUAL DVB-S2
[ 10.403104] Port 1 (TAB 2): NO MODULE
[ 10.403833] Port 2 (TAB 3): NO MODULE
[ 10.404471] Port 3 (TAB 4): NO MODULE
[ 10.404592] DVB: registering new adapter (DDBridge)
[ 10.559033] LNBx2x attached on addr=a
[ 10.559036] stv6110x_attach: Attaching STV6110x
[ 10.559037] attach tuner input 0 adr 60
[ 10.559040] DDBridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[ 10.559195] DVB: registering new adapter (DDBridge)
[ 10.600030] LNBx2x attached on addr=8
[ 10.600033] stv6110x_attach: Attaching STV6110x
[ 10.600034] attach tuner input 1 adr 63
[ 10.600036] DDBridge 0000:04:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...
server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter1:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter2:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter3:
demux0 dvr0 frontend0 net0
server> lsmod
Module Size Used by Tainted: G
stv6110x 3928 4
lnbp21 1800 4
stv090x 41679 4
i2c_i801 11632 0
i2c_smbus 2977 1 i2c_i801
ddbridge 16497 16
cxd2099 5015 1 ddbridge
dvb_core 81722 1 ddbridge
nfsd 199180 11
i2c_dev 4586 0
r8169 56990 0
mii 3587 1 r8169
server>
server> dpkg -l|grep dvb
ii dvb 2:0-7+4.8.15.198.3 amd64 DVB Treiber aus Linuxkernel
ii dvb-apps 1.1.1-~3 amd64 Digital Video Broadcasting (DVB) applications
--- End code ---
MLD 5.3 dvb-mb
--- Code: ---[ 10.194210] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.407670] media: loading out-of-tree module taints kernel.
[ 10.407826] media: Linux media interface: v0.10
[ 10.408169] WARNING: You are using an experimental version of the media stack.
[ 10.408169] As the driver is backported to an older kernel, it doesn't offer
[ 10.408169] enough quality for its usage in production.
[ 10.408169] Use it with care.
[ 10.408169] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 10.408169]
[ 10.408507] DDBridge: Digital Devices PCIE bridge driver 0.9.28, Copyright (C) 2010-16 Digital Devices GmbH
[ 10.408746] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.408759] DDBridge: HW 0001000d REGMAP 00010004
[ 10.408798] DDBridge: using 1 MSI interrupt(s)
[ 10.408823] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[ 10.409106] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 10.410132] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 10.411428] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 10.412652] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 10.413849] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 10.413967] DDBridge: 0 netstream channels
[ 10.413968] dvbdev: DVB: registering new adapter (DDBridge)
[ 10.413968] dvbdev: DVB: registering new adapter (DDBridge)
[ 10.575189] Attaching STV0900 demodulator(1) Cut=0x30
[ 10.576568] LNBx2x attached on addr=a
[ 10.577625] stv6110x_attach: Attaching STV6110x
[ 10.577627] DDBridge: attach tuner input 0 adr 60
[ 10.577630] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 10.619189] Attaching STV0900 demodulator(2) Cut=0x30
[ 10.619493] LNBx2x attached on addr=8
[ 10.619496] stv6110x_attach: Attaching STV6110x
[ 10.619497] DDBridge: attach tuner input 1 adr 63
[ 10.619500] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 10.619829] DDBridge: device name: Digital Devices Cine S2 V6.5 DVB adapter
[ 10.619841] DDBridge: HW 0001000d REGMAP 00010004
[ 10.619879] DDBridge: using 1 MSI interrupt(s)
[ 10.619904] DDBridge: link 0 vendor dd01 device 0003 subvendor dd01 subdevice 0021
[ 10.621416] DDBridge: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 10.622527] DDBridge: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 10.623719] DDBridge: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 10.624870] DDBridge: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 10.624978] DDBridge: 0 netstream channels
[ 10.624980] dvbdev: DVB: registering new adapter (DDBridge)
[ 10.624980] dvbdev: DVB: registering new adapter (DDBridge)
[ 10.784159] Attaching STV0900 demodulator(1) Cut=0x30
[ 10.784458] LNBx2x attached on addr=a
[ 10.784461] stv6110x_attach: Attaching STV6110x
[ 10.784462] DDBridge: attach tuner input 0 adr 60
[ 10.784465] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[ 10.825230] Attaching STV0900 demodulator(2) Cut=0x30
[ 10.825516] LNBx2x attached on addr=8
[ 10.825519] stv6110x_attach: Attaching STV6110x
[ 10.825520] DDBridge: attach tuner input 1 adr 63
[ 10.825522] ddbridge 0000:04:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...
/dev/dvb/adapter0:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter1:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter2:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter3:
demux0 dvr0 frontend0 net0
server> lsmod
Module Size Used by Tainted: G
stv6110x 3864 4
lnbp21 1800 4
stv090x 43050 4
i2c_i801 11632 0
i2c_smbus 2977 1 i2c_i801
ddbridge 76134 18
cxd2099 5761 1 ddbridge
dvb_core 78037 1 ddbridge
media 15988 1 dvb_core
nfsd 199180 11
i2c_dev 4586 0
r8169 56990 0
mii 3587 1 r8169
server> lspci -mk
00:1f.3 "Class 0403" "8086" "a170" "1043" "86bd"
00:00.0 "Class 0600" "8086" "191f" "1043" "8694" "skl_uncore"
00:1d.0 "Class 0604" "8086" "a118" "1043" "8694" "pcieport"
00:02.0 "Class 0300" "8086" "1912" "1043" "8694"
04:00.0 "Class 0480" "dd01" "0003" "dd01" "0021" "ddbridge"
00:14.0 "Class 0c03" "8086" "a12f" "1043" "8694" "xhci_hcd"
00:1f.4 "Class 0c05" "8086" "a123" "1043" "8694" "i801_smbus"
00:17.0 "Class 0106" "8086" "a102" "1043" "8694" "ahci"
00:1f.2 "Class 0580" "8086" "a121" "1043" "8694"
03:00.0 "Class 0480" "dd01" "0003" "dd01" "0021" "ddbridge"
00:1c.0 "Class 0604" "8086" "a114" "1043" "8694" "pcieport"
00:1f.0 "Class 0601" "8086" "a148" "1043" "8694"
02:00.0 "Class 0400" "18c3" "0720" "18c3" "ab04"
00:1c.7 "Class 0604" "8086" "a117" "1043" "8694" "pcieport"
00:1c.5 "Class 0604" "8086" "a115" "1043" "8694" "pcieport"
00:16.0 "Class 0780" "8086" "a13a" "1043" "8694"
01:00.0 "Class 0200" "10ec" "8168" "1043" "8677" "r8169"
server> dpkg -l|grep dvb
ii dvb-apps 1.1.1-~3 amd64 Digital Video Broadcasting (DVB) applications
ii dvb-mb 1:2017.03.07-27+4.8.15.198.3 amd64 tt, tbs, dddvb, linuxTV and FF S2-6400 DVB Treiber (one package for the most of devices)
--- End code ---
TimUx:
Und noch MLD 5.1, wo alles sauber läuft.
MLD 5.1 dvb.mbe
--- Code: ---[ 2.801777] WARNING: You are using an experimental version of the media stack.
[ 2.801777] As the driver is backported to an older kernel, it doesn't offer
[ 2.801777] enough quality for its usage in production.
[ 2.801777] Use it with care.
[ 2.801777] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 2.801777] 1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[ 2.801777] ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[ 2.801777] 5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[ 2.801777] experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[ 2.801777] v4l-dvb-saa716x: 3b9fce66666a32ddf2b94ac7e72e540773f3e353 saa716x_ff: Avoid sleeping in fifo_worker
[ 2.803361] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000046000, f8:32:e4:8c:33:9c, XID 14100800 IRQ 122
[ 2.803364] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.806827] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[ 2.806918] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner
[ 2.807162] ngene: Device version 1
[ 2.807750] Digital Devices PCIE bridge driver 0.9.18, Copyright (C) 2010-15 Digital Devices GmbH
[ 2.808636] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 2.808647] DDBridge: HW 0001000d REGMAP 00010004
[ 2.808707] DDBridge: using 1 MSI interrupt(s)
[ 2.810138] random: nonblocking pool is initialized
[ 2.810988] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 2.812111] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 2.813271] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 2.814283] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 2.814393] 0 netstream channels
[ 2.814394] DVB: registering new adapter (DDBridge)
[ 2.814396] DVB: registering new adapter (DDBridge)
[ 2.815417] ngene: Loading firmware file ngene_18.fw.
[ 2.838319] error in i2c_read_reg
[ 2.838321] No CXD2099 detected at 40
[ 2.858753] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[ 2.864152] UDF-fs: warning (device sdb1): udf_fill_super: No partition found (2)
[ 2.984297] Attaching STV0900 demodulator(1) Cut=0x30
[ 2.986458] LNBx2x attached on addr=a
[ 2.988200] stv6110x_attach: Attaching STV6110x
[ 2.988202] attach tuner input 0 adr 60
[ 2.988244] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 3.026291] Attaching STV0900 demodulator(2) Cut=0x30
[ 3.026608] LNBx2x attached on addr=8
[ 3.026612] stv6110x_attach: Attaching STV6110x
[ 3.026613] attach tuner input 1 adr 63
[ 3.026763] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 3.027094] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 3.027105] DDBridge: HW 0001000d REGMAP 00010004
[ 3.027159] DDBridge: using 1 MSI interrupt(s)
[ 3.028918] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 3.030419] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 3.031779] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 3.032891] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 3.032992] 0 netstream channels
[ 3.032994] DVB: registering new adapter (DDBridge)
[ 3.032995] DVB: registering new adapter (DDBridge)
[ 3.150303] Attaching STV0900 demodulator(1) Cut=0x20
[ 3.151086] LNBx2x attached on addr=b
[ 3.151091] stv6110x_attach: Attaching STV6110x
[ 3.151105] DVB: registering new adapter (nGene)
[ 3.151203] ngene 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV090x Multistandard)...
[ 3.198293] Attaching STV0900 demodulator(2) Cut=0x20
[ 3.198632] Attaching STV0900 demodulator(1) Cut=0x30
[ 3.198632] LNBx2x attached on addr=a
[ 3.198637] stv6110x_attach: Attaching STV6110x
[ 3.198651] attach tuner input 0 adr 60
[ 3.198789] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[ 3.199045] LNBx2x attached on addr=8
[ 3.199062] stv6110x_attach: Attaching STV6110x
[ 3.199063] DVB: registering new adapter (nGene)
[ 3.199098] ngene 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV090x Multistandard)...
[ 3.237288] Attaching STV0900 demodulator(2) Cut=0x30
[ 3.237613] LNBx2x attached on addr=8
[ 3.237617] stv6110x_attach: Attaching STV6110x
[ 2.807750] Digital Devices PCIE bridge driver 0.9.18, Copyright (C) 2010-15 Digital Devices GmbH
[ 2.808636] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 2.808647] DDBridge: HW 0001000d REGMAP 00010004
[ 2.808707] DDBridge: using 1 MSI interrupt(s)
[ 2.810138] random: nonblocking pool is initialized
[ 2.810988] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 2.812111] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 2.813271] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 2.814283] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 2.814393] 0 netstream channels
[ 2.814394] DVB: registering new adapter (DDBridge)
[ 2.814396] DVB: registering new adapter (DDBridge)
[ 2.815417] ngene: Loading firmware file ngene_18.fw.
[ 2.838319] error in i2c_read_reg
[ 2.838321] No CXD2099 detected at 40
[ 2.858753] UDF-fs: warning (device sdc1): udf_fill_super: No partition found (2)
[ 2.864152] UDF-fs: warning (device sdb1): udf_fill_super: No partition found (2)
[ 2.984297] Attaching STV0900 demodulator(1) Cut=0x30
[ 2.986458] LNBx2x attached on addr=a
[ 2.988200] stv6110x_attach: Attaching STV6110x
[ 2.988202] attach tuner input 0 adr 60
[ 2.988244] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 3.026291] Attaching STV0900 demodulator(2) Cut=0x30
[ 3.026608] LNBx2x attached on addr=8
[ 3.026612] stv6110x_attach: Attaching STV6110x
[ 3.026613] attach tuner input 1 adr 63
[ 3.026763] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 3.027094] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 3.027105] DDBridge: HW 0001000d REGMAP 00010004
[ 3.027159] DDBridge: using 1 MSI interrupt(s)
[ 3.028918] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 3.030419] Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 3.031779] Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 3.032891] Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 3.032992] 0 netstream channels
[ 3.032994] DVB: registering new adapter (DDBridge)
[ 3.032995] DVB: registering new adapter (DDBridge)
[ 3.150303] Attaching STV0900 demodulator(1) Cut=0x20
[ 3.151086] LNBx2x attached on addr=b
[ 3.151091] stv6110x_attach: Attaching STV6110x
[ 3.151105] DVB: registering new adapter (nGene)
[ 3.151203] ngene 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV090x Multistandard)...
[ 3.198293] Attaching STV0900 demodulator(2) Cut=0x20
[ 3.198632] Attaching STV0900 demodulator(1) Cut=0x30
[ 3.198632] LNBx2x attached on addr=a
[ 3.198637] stv6110x_attach: Attaching STV6110x
[ 3.198651] attach tuner input 0 adr 60
[ 3.198789] ddbridge 0000:04:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[ 3.199045] LNBx2x attached on addr=8
[ 3.199062] stv6110x_attach: Attaching STV6110x
[ 3.199063] DVB: registering new adapter (nGene)
[ 3.199098] ngene 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV090x Multistandard)...
[ 3.237288] Attaching STV0900 demodulator(2) Cut=0x30
[ 3.237613] LNBx2x attached on addr=8
[ 3.237617] stv6110x_attach: Attaching STV6110x
server> lspci
00:00.0 Host bridge: Intel Corporation Device 191f (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Device 1912 (rev 06)
00:14.0 USB controller: Intel Corporation Device a12f (rev 31)
00:16.0 Communication controller: Intel Corporation Device a13a (rev 31)
00:17.0 SATA controller: Intel Corporation Device a102 (rev 31)
00:1c.0 PCI bridge: Intel Corporation Device a114 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Device a115 (rev f1)
00:1c.7 PCI bridge: Intel Corporation Device a117 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Device a118 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device a148 (rev 31)
00:1f.2 Memory controller: Intel Corporation Device a121 (rev 31)
00:1f.3 Audio device: Intel Corporation Device a170 (rev 31)
00:1f.4 SMBus: Intel Corporation Device a123 (rev 31)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Multimedia video controller: Micronas Semiconductor Holding AG nGene PCI-Express Multimedia Controller (rev 04)
03:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
04:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
server> ls /dev/dvb/adapter*
/dev/dvb/adapter0:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter1:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter2:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter3:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter4:
demux0 dvr0 frontend0 net0
/dev/dvb/adapter5:
demux0 dvr0 frontend0 net0
server> lsmod
Module Size Used by Tainted: G
nfsd 197463 11
raid1 23590 1
stv6110x 3992 6
lnbp21 1800 6
stv090x 41981 6
ddbridge 62962 29
ngene 25381 0
cxd2099 5761 2 ddbridge,ngene
dvb_core 75200 2 ddbridge,ngene
r8169 56828 0
i2c_i801 10026 0
mii 3523 1 r8169
acpi_cpufreq 6050 0
i2c_dev 4458 0
--- End code ---
P3f:
Hallo Timo,
ok, anhand der Logfiles kann man schon erkennen, das die "ngene" Kernelmodule nicht geladen sind. Die Karte wird aber erkannt (sieht man im lspci.out)
Jetzt würde mich interessieren, ob man das module mit "modprobe ngene" nachladen kann! Dann haben wir nur ggf. ein Timing Problem mit dem Board ASUS Trooper B150 D3 und einem neueren Linux kernel.
Es kann natürlich auch an einer BIOS Einstellung sein. Vielleicht hast Du ja auch die Chance die beiden PCI Karten mal gegeneinander zutauschen und im BIOS zu schauen. (Meine Vermutung ist das Powermanagment beim ASUS-Board).
Und interessant wäre dann ein Test mit der MLD 5.4, was Du ja sowieso machen wolltest wegen dem owncloud.
Gruß,
Pit
P.S: Es reicht wenn Du das DVB-MB anwendest, das beinhaltet auf jeden Fall die ngene-Treiber.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version