DVB-T2

MLD-5.x > General

DVB-T2

(1/4) > >>

clausmuus:
Hi,

bei der MLD-5.3 unterstützt das VDR Ausgabedevice für PCs (nicht RPI und co.) ja schon etwas länger das Anzeigen von DVB-T2 HD Sendern. Jetzt habe ich auch endlich das Tool zum erstellen von neuen Kanllisten (w_scan) um einen Patch erweitert, der helfen kann, diese Sender auch zu finden, sofern die verwendete DVB Hardware dies unterstützt.
Dafür gibt es jetzt, nach installieren des scan Paketes, im Webif unter "TV / Scan-Channellist / DVB type" die Möglichkeit DVB-T2 auszuwählen. Leider ist das ganze Thema noch in der Entwicklung, weshalb es hier auszuprobieren gilt, ob der DVB-T oder DVB-T2 Scan mehr Erfolg bringt, oder ob anschließend beide Scan Ergebnisse manuell zusammen geführt werden müssen.

Den DVB-T2 Scan habe ich, aufgrund fehlender Hardware, selber nicht testen können.

Claus

mipi:
Hallo,
ich habe gerade eine DVB-T2 Scan durchgeführt. Wie man im Log sieht, werden die DVB-T2-Sender gefunden, zu sehen ganz unten im Scan - es sind die "MEDIA BROADCAST" Sender.

--- Code: ---w_scan -c DE -f t -Y -N -s S19E2 -E 0
w_scan version 20161022 (mighty-p patch version 2) (compiled for DVB API 5.10)
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Silicon Labs Si2168": very good :-))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.10
frontend 'Silicon Labs Si2168' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (55.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:00.120) signal ok: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:514)
-/| QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:0:514) : updating network_id -> (0:12290:514)
482000: (time: 00:07.810) -/
490000: (time: 00:09.830) |
498000: (time: 00:11.839) -
506000: (time: 00:13.859) /|
514000: (time: 00:15.880) 522000: (time: 00:17.899) -/
530000: (time: 00:19.920) |
538000: (time: 00:21.929) -
546000: (time: 00:23.949) signal ok: QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:514)
/|WARNING: received garbage data: crc = 0x00ed94c3; expected crc = 0x24a48549
increasing filter timeout to 42 secs (pid:16 table_id:64 table_id_ext:-1).
-/|-/|WARNING: received garbage data: crc = 0xeb46eb53; expected crc = 0x9ea48549
-/|-/WARNING: received garbage data: crc = 0x6f066499; expected crc = 0x9ea48549
|-/|-/|-/|-/| Info: no data from NIT(actual )after 42 seconds
554000: (time: 01:07.260) -
562000: (time: 01:09.290) /|
570000: (time: 01:11.299)
578000: (time: 01:11.829) -
586000: (time: 01:13.849) /|
594000: (time: 01:15.870) 602000: (time: 01:17.890) -
610000: (time: 01:18.359) /
618000: (time: 01:20.379) | signal ok: QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999 (0:0:0)
Info: no data from PAT after 2 seconds
deleting (QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999 (0:0:0))
626000: (time: 01:23.280) -/
634000: (time: 01:25.299) |642000: (time: 01:27.319) -
650000: (time: 01:29.340) /|
658000: (time: 01:31.370) signal ok: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14608)
QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:0:14608) : updating network_id -> (0:12345:14608)
666000: (time: 01:33.159) -/
674000: (time: 01:35.189) |682000: (time: 01:37.209) -
690000: (time: 01:39.239) /|
698000: (time: 01:41.250) signal ok: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14593)
-/| QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:0:14593) : updating network_id -> (0:12345:14593)
706000: (time: 01:48.049) -/
714000: (time: 01:50.069) |722000: (time: 01:52.090) signal ok: QAM_AUTO f = 722000 kHz I999B8C999D999T999G999Y999 (0:0:0)
-/ Info: no data from PAT after 2 seconds
deleting (QAM_AUTO f = 722000 kHz I999B8C999D999T999G999Y999 (0:0:0))
730000: (time: 01:55.269) |738000: (time: 01:57.290) -
746000: (time: 01:59.319) /|
754000: (time: 02:01.340) -
762000: (time: 02:03.349) signal ok: QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14337)
/|-/| QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:0:14337) : updating network_id -> (0:12344:14337)
770000: (time: 02:11.009) 778000: (time: 02:13.020) -/
786000: (time: 02:15.030) signal ok: QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:0)
QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:14337)
|-/ QAM_AUTO f = 786000 kHz I999B8C999D999T999G999Y999 (0:0:14337) : updating network_id -> (0:12344:14337)
794000: (time: 02:19.689) |
802000: (time: 02:21.719) -
810000: (time: 02:23.729) /
818000: (time: 02:25.759) |826000: (time: 02:27.770) -/
834000: (time: 02:29.789) |
842000: (time: 02:31.810) -
850000: (time: 02:33.830) /
858000: (time: 02:35.860) |Scanning DVB-T2...
474000: (time: 02:37.879) -
482000: (time: 02:39.909) /|
490000: (time: 02:41.939) -
498000: (time: 02:43.960) /
506000: (time: 02:45.990) |514000: (time: 02:48.000) -
522000: (time: 02:50.009) /|
530000: (time: 02:52.020) -
538000: (time: 02:54.030) /
546000: (time: 02:56.060) |554000: (time: 02:58.069) -/
562000: (time: 03:00.090) |
570000: (time: 03:02.120) -
578000: (time: 03:04.139) /
586000: (time: 03:06.150) | signal ok: QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:16481)
QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:0:16481) : updating network_id -> (0:12352:16481)
594000: (time: 03:07.129) -
602000: (time: 03:09.150) /
610000: (time: 03:11.210) |618000: (time: 03:13.219) -
626000: (time: 03:15.250) /|
634000: (time: 03:17.270) -
642000: (time: 03:19.289) /
650000: (time: 03:21.319) |658000: (time: 03:23.330) -
666000: (time: 03:25.340) /|
674000: (time: 03:27.370) -
682000: (time: 03:29.379) /
690000: (time: 03:31.389) |698000: (time: 03:33.400) -/
706000: (time: 03:35.449) |
714000: (time: 03:37.479) -
722000: (time: 03:39.509) /
730000: (time: 03:41.539) |738000: (time: 03:43.550) -/
746000: (time: 03:45.610) |
754000: (time: 03:47.629) -
762000: (time: 03:49.659) /|
770000: (time: 03:51.680) 778000: (time: 03:53.740)
786000: (time: 03:54.159) -/
794000: (time: 03:56.189) |802000: (time: 03:58.219) -
810000: (time: 04:00.240) /|
818000: (time: 04:02.270) -
826000: (time: 04:04.289) /
834000: (time: 04:06.330) |842000: (time: 04:08.340) -
850000: (time: 04:10.360) /|
858000: (time: 04:12.370) tune to: QAM_AUTO f = 474000 kHz I999B8C999D999T999G999Y999 (0:12290:514) (time: 04:14.379)
- service = ZDF (ZDFmobil)
service = 3sat (ZDFmobil)
service = ZDFinfo (ZDFmobil)
service = neo/KiKA (ZDFmobil)
/|-/|-/|tune to: QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:514) (time: 04:28.269)
WARNING: received garbage data: crc = 0xb932787d; expected crc = 0xf4419744
increasing filter timeout to 31 secs (pid:544 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0xaa5bee0a; expected crc = 0xaa389a26
increasing filter timeout to 31 secs (pid:592 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0x4f606917; expected crc = 0xd5a79c21
increasing filter timeout to 31 secs (pid:576 table_id:2 table_id_ext:-1).
WARNING: received garbage data: crc = 0x8f94994f; expected crc = 0x9f930e2d
increasing filter timeout to 32 secs (pid:17 table_id:66 table_id_ext:-1).
WARNING: received garbage data: crc = 0xbd34f603; expected crc = 0xd5a73421
WARNING: received garbage data: crc = 0x51c449de; expected crc = 0x449fb902
increasing filter timeout to 31 secs (pid:560 table_id:2 table_id_ext:-1).
-WARNING: received garbage data: crc = 0x729fa22f; expected crc = 0xd5a79c21
WARNING: received garbage data: crc = 0x5fe9326d; expected crc = 0x449f8107
WARNING: received garbage data: crc = 0x064e772b; expected crc = 0x45080118
WARNING: received garbage data: crc = 0x2c8034bb; expected crc = 0x30010356
WARNING: received garbage data: crc = 0x83d0ac15; expected crc = 0xd5a73421
/ service = ZDF (ZDFmobil)
service = 3sat (ZDFmobil)
service = ZDFinfo (ZDFmobil)
service = neo/KiKA (ZDFmobil)
|-/|WARNING: received garbage data: crc = 0xe72f4451; expected crc = 0x9ea48549
increasing filter timeout to 42 secs (pid:16 table_id:64 table_id_ext:-1).
-/|-/|-/|-/|-/|- QAM_AUTO f = 546000 kHz I999B8C999D999T999G999Y999 (0:0:514) : updating network_id -> (0:12290:514)
tune to: QAM_AUTO f = 658000 kHz I999B8C999D999T999G999Y999 (0:12345:14608) (time: 05:05.800)
service = Bayerisches FS (SWR)
service = hr-fernsehen (SWR)
service = SWR Fernsehen RP (SWR)
service = WDR Fernsehen (SWR)
/|- already known: (QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:12345:14593)), but not found by pids
/|-/|tune to: QAM_AUTO f = 698000 kHz I999B8C999D999T999G999Y999 (0:12345:14593) (time: 05:20.259)
- service = Bayerisches FS (SWR)
service = hr-fernsehen (SWR)
service = SWR Fernsehen BW (SWR)
service = WDR Fernsehen (SWR)
/|-/|-/|tune to: QAM_AUTO f = 762000 kHz I999B8C999D999T999G999Y999 (0:12344:14337) (time: 05:34.259)
service = arte (SWR)
service = Phoenix (SWR)
service = ONE (SWR)
service = Das Erste (SWR)
-/|-/|-/|tune to: QAM_AUTO f = 586000 kHz I999B8C999D999T999G999Y999P0 (0:12352:16481) (time: 05:48.269)
service = Das Erste HD (MEDIA BROADCAST)
service = ZDF HD (MEDIA BROADCAST)
service = RTL HD (MEDIA BROADCAST)
service = Pro7 HD (MEDIA BROADCAST)
service = SAT.1 HD (MEDIA BROADCAST)
service = VOX HD (MEDIA BROADCAST)
-/|-/|-(time: 06:02.269) dumping lists (18 services)
..
Done, scan time: 06:02.279
/|-/|-/|-/Starting VDR
--- End code ---

Und hier ist die resultierende channel.conf. Da ich den Scan so konfiguriert hatte, dass nur freie Sender gesucht werden sollten, sind Das Erste und ZDF als einzige DVB-T2-Sender übernommen worden. Die restlichen Sender sind DVB-T-Sender.

--- Code: ---:->favoriten
Das Erste HD;MEDIA BROADCAST:586000:B8S1P0:T:27500:1361=36:1362=deu@15,1363=mis@4:1366:0:769:0:16481:0
ZDF HD;MEDIA BROADCAST:586000:B8S1P0:T:27500:1377=36:0;1378=@106:1382:0:16961:0:16481:0
arte;SWR:762000:B8:T:27500:513=2:514=deu@3,515=fra@4:516:0:2:0:14337:0
ZDFinfo;ZDFmobil:474000:B8:T:27500:577=2:578=deu@3:583:0:516:0:514:0
3sat;ZDFmobil:474000:B8:T:27500:561=2:562=deu@3,563=mis@4:567:0:515:0:514:0
:->news
Phoenix;SWR:762000:B8:T:27500:769=2:770=deu@3:772:0:3:0:14337:0
:->regional programme
hr-fernsehen;SWR:658000:B8:T:27500:513=2:514=deu@3:516:0:65:0:14608:0
hr-fernsehen;SWR:698000:B8:T:27500:513=2:514=deu@3:516:0:65:0:14593:0
SWR Fernsehen BW;SWR:698000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:225:0:14593:0
SWR Fernsehen RP;SWR:658000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:226:0:14608:0
:->andere
ZDF;ZDFmobil:474000:B8:T:27500:545=2:546=deu@3,547=mis@4:551:0:514:0:514:0
neo/KiKA;ZDFmobil:474000:B8:T:27500:593=2:594=deu@3:599:0:517:0:514:0
Bayerisches FS;SWR:658000:B8:T:27500:1025=2:1026=deu@3:1028:0:34:0:14608:0
WDR Fernsehen;SWR:658000:B8:T:27500:769=2:770=deu@3:772:0:262:0:14608:0
Bayerisches FS;SWR:698000:B8:T:27500:1025=2:1026=deu@3:1028:0:34:0:14593:0
WDR Fernsehen;SWR:698000:B8:T:27500:769=2:770=deu@3:772:0:262:0:14593:0
ONE;SWR:762000:B8:T:27500:1025=2:1026=deu@3:1028:0:6:0:14337:0
Das Erste;SWR:762000:B8:T:27500:257=2:258=deu@3,259=mis@4:260:0:224:0:14337:0

--- End code ---

Startet man den Scan mit der Einstellung "DVB-T2", bekommt man also als Ergebnis eine kombinierte Liste aus DVB-T2 und DVB-T Sendern.

mipi

Holger:
Hi,
meine neue Hauppauge WinTV-quadHD für DVB-T2 wird leider noch nicht erkannt (unter MLD 5.1, Standard DVB-Treiber)

dmesg meldet:

--- Code: ---[ 4.911143] cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 19, latency: 0, mmio: 0xa5200000
[ 4.911756] cx23885[1]: Your board isn't known (yet) to the driver.
[ 4.911756] cx23885[1]: Try to pick one of the existing card configs via
[ 4.911756] cx23885[1]: card=<n> insmod option. Updating to the latest
[ 4.911756] cx23885[1]: version might help as well.
[ 4.911765] cx23885[1]: Here is a list of valid choices for the card=<n> insmod option:
[ 4.911768] cx23885[1]: card=0 -> UNKNOWN/GENERIC
[ 4.911771] cx23885[1]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 4.911774] cx23885[1]: card=2 -> Hauppauge WinTV-HVR1800
[ 4.911777] cx23885[1]: card=3 -> Hauppauge WinTV-HVR1250
[ 4.911780] cx23885[1]: card=4 -> DViCO FusionHDTV5 Express
[ 4.911783] cx23885[1]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 4.911790] cx23885[1]: card=6 -> Hauppauge WinTV-HVR1500
[ 4.911793] cx23885[1]: card=7 -> Hauppauge WinTV-HVR1200
[ 4.911796] cx23885[1]: card=8 -> Hauppauge WinTV-HVR1700
[ 4.911800] cx23885[1]: card=9 -> Hauppauge WinTV-HVR1400
[ 4.911803] cx23885[1]: card=10 -> DViCO FusionHDTV7 Dual Express
[ 4.911806] cx23885[1]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
[ 4.911809] cx23885[1]: card=12 -> Leadtek Winfast PxDVR3200 H
[ 4.911812] cx23885[1]: card=13 -> Compro VideoMate E650F
[ 4.911815] cx23885[1]: card=14 -> TurboSight TBS 6920
[ 4.911818] cx23885[1]: card=15 -> TeVii S470
[ 4.911822] cx23885[1]: card=16 -> DVBWorld DVB-S2 2005
[ 4.911825] cx23885[1]: card=17 -> NetUP Dual DVB-S2 CI
[ 4.911828] cx23885[1]: card=18 -> Hauppauge WinTV-HVR1270
[ 4.911831] cx23885[1]: card=19 -> Hauppauge WinTV-HVR1275
[ 4.911834] cx23885[1]: card=20 -> Hauppauge WinTV-HVR1255
[ 4.911857] cx23885[1]: card=21 -> Hauppauge WinTV-HVR1210
[ 4.911860] cx23885[1]: card=22 -> Mygica X8506 DMB-TH
[ 4.911864] cx23885[1]: card=23 -> Magic-Pro ProHDTV Extreme 2
[ 4.911867] cx23885[1]: card=24 -> Hauppauge WinTV-HVR1850
[ 4.911870] cx23885[1]: card=25 -> Compro VideoMate E800
[ 4.911873] cx23885[1]: card=26 -> Hauppauge WinTV-HVR1290
[ 4.911876] cx23885[1]: card=27 -> Mygica X8558 PRO DMB-TH
[ 4.911880] cx23885[1]: card=28 -> LEADTEK WinFast PxTV1200
[ 4.911883] cx23885[1]: card=29 -> GoTView X5 3D Hybrid
[ 4.911886] cx23885[1]: card=30 -> NetUP Dual DVB-T/C-CI RF
[ 4.911889] cx23885[1]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000
[ 4.911892] cx23885[1]: card=32 -> MPX-885
[ 4.911896] cx23885[1]: card=33 -> Mygica X8502/X8507 ISDB-T
[ 4.911899] cx23885[1]: card=34 -> TerraTec Cinergy T PCIe Dual
[ 4.911902] cx23885[1]: card=35 -> TeVii S471
[ 4.911905] cx23885[1]: card=36 -> Hauppauge WinTV-HVR1255
[ 4.911908] cx23885[1]: card=37 -> Prof Revolution DVB-S2 8000
[ 4.911911] cx23885[1]: card=38 -> Hauppauge WinTV-HVR4400/HVR5500
[ 4.911914] cx23885[1]: card=39 -> AVerTV Hybrid Express Slim HC81R
[ 4.911917] cx23885[1]: card=40 -> TurboSight TBS 6981
[ 4.911920] cx23885[1]: card=41 -> TurboSight TBS 6980
[ 4.911923] cx23885[1]: card=42 -> Leadtek Winfast PxPVR2200
[ 4.911927] cx23885[1]: card=43 -> Hauppauge ImpactVCB-e
[ 4.911930] cx23885[1]: card=44 -> DViCO FusionHDTV DVB-T Dual Express2
[ 4.911933] cx23885[1]: card=45 -> DVBSky T9580
[ 4.911936] cx23885[1]: card=46 -> DVBSky T980C
[ 4.911939] cx23885[1]: card=47 -> DVBSky S950C
[ 4.911942] cx23885[1]: card=48 -> Technotrend TT-budget CT2-4500 CI
[ 4.911945] cx23885[1]: card=49 -> DVBSky S950
[ 4.911948] cx23885[1]: card=50 -> DVBSky S952
[ 4.911951] cx23885[1]: card=51 -> DVBSky T982
[ 4.911954] cx23885[1]: card=52 -> Hauppauge WinTV-HVR5525
[ 4.911957] cx23885[1]: card=53 -> Hauppauge WinTV Starburst
[ 4.914390] CORE cx23885[1]: subsystem: 0070:6b28, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 5.046207] cx23885_dev_checkrevision() Hardware revision = 0xa4
[ 5.046220] cx23885[1]/0: found at 0000:06:00.0, rev: 3, irq: 16, latency: 0, mmio: 0xa5000000

--- End code ---

-Was müsste ich eingeben, um dies zu testen:
Try to pick one of the existing card configs via card=<n> insmod option. ?

-Ist der Treiber unter MLD 5.3 schon integriert ?

- oder den DVB-MBE-Treiber nehmen ?

- welche Informationen werden benötigt, um das entsprechende Modul einzubinden ?

Beste Grüße
Holger

clausmuus:
Hi,

die meisten Karten werden derzeit vom dvb-mb Treiber der MLD-5.3 unterstützt.
Und auch nur das scan Paket der MLD-5.3 kann DVB-T2 Sender finden.

Claus

Holger:
Hi,
unter MLD 5.3 wird die Hauppauge WinTV-quadHD auch mit dem Standard-DVB-Treiber erkannt, perfekt !

Dann werde ich mich als nächstes mit wscan für DVB-T2-Sender beschäftigen...

Vielen Dank an dieser Stelle auch mal wieder für Euren tollen Einsatz für die MLD-Gemeinde !

Beste Grüße
Holger

Navigation

[0] Message Index

[#] Next page

Go to full version