MLD-5.x > General
Erfahrungsbericht und Probleme mit 2. Tuner
Higgs:
Hallo,
ich bin neu in der VDR-Welt und habe ein paar Distributionen getestet bevor ich nun bei MLD gelandet bin. Mein Setup beinhaltet:
Server: eine alte Zbox (Nvidia-Ion)
DVB-USB Tuner 1: TBS Technologies Q-Box II DVB-S2 HD (734c:5928)
DVB Tuner 2: TerraTec Cinergy Rev. 4 (0ccd:0105)
Client: Raspberry PI 1 B
Das ganze ist über D-Lan miteinander verbunden.
Die Qbox steuert 2 Sataliten über Diseqc an was auch wunderbar funktioniert. Die Karte habe ich mit dem Dvb-Tbs Paket zum laufen bekommen, musste aber zusätzlich noch Firmware einspielen.
dvb-usb-tbsqbox-id5928.fw und dvb-fe-cx24116.fw
Danach funktionierte auch der eingebaute IR-Empfänger.
Kann man die Box hier mit ins Wiki aufnehmen?
Nun wollte ich noch einen zweiten Tuner anschliessen und habe mir die Terratec Cinergy besorgt. Leider habe ich zu spät gesehen, dass die Revision 4 wohl nicht so einfach zum laufen zu bekommen ist wie Rev. 1 oder 2. Ich habe etwas recherchiert und der Tuner soll ein TechnoTrend S2-4600/TeVii S662 Klon sein und bin auf folgendes gestossen:
http://forum.doozan.com/read.php?2,25252
https://git.linuxtv.org/media_tree.git/commit/?id=6ede20f9683c55dac8281b63d80b5cc669640252
https://forum.ubuntuusers.de/topic/pi-vdr-mit-cinergy-s2-usb-r2-0ccd-0105/2/
Leider werde ich daraus nicht ganz schlau.
Könnt ihr mir helfen den Tuner unter MLD zum laufen zu bekommen?
clausmuus:
Hi,
Willkommen an Bord!
hast Du schon versucht, ob eventuell das dvb-mbe Paket für beide DVB Empfänger hilft?
Claus
Higgs:
Hi,
gerade eben nochmal probiert. Leider ohne Erfolg.
Habe noch mit Modprobe dw2102 versucht den Treiber manuell zu laden. Übersehe ich irgendwas?
DMESG (gekürzt)
--- Code: ---[ 0.000000] Linux version 4.4.5.197.2 (stable@nightbuild-32) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sun Dec 11 00:17:59 CET 2016
[ 2.668897] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.668915] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.668951] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[ 2.669497] hub 3-0:1.0: USB hub found
[ 2.669518] hub 3-0:1.0: 2 ports detected
[ 2.669967] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.669984] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.670044] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 2.670592] hub 4-0:1.0: USB hub found
[ 2.670612] hub 4-0:1.0: 2 ports detected
[ 2.671068] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.671086] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.671142] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[ 2.671692] hub 5-0:1.0: USB hub found
[ 2.671714] hub 5-0:1.0: 2 ports detected
[ 2.672202] usbcore: registered new interface driver cdc_acm
[ 2.672207] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.672262] usbcore: registered new interface driver usblp
[ 2.672379] usbcore: registered new interface driver usb-storage
[ 2.672465] usbcore: registered new interface driver usbserial
[ 2.672503] usbcore: registered new interface driver ftdi_sio
[ 2.672534] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.672667] usbcore: registered new interface driver pl2303
[ 2.672695] usbserial: USB Serial support registered for pl2303
[ 2.672812] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.675854] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.675869] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.676423] mousedev: PS/2 mouse device common for all mice
[ 2.676948] rtc_cmos 00:01: RTC can wake from S4
[ 2.677238] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.677307] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 2.677461] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.677877] usbcore: registered new interface driver usbhid
[ 2.677881] usbhid: USB HID core driver
[ 2.678162] NET: Registered protocol family 10
[ 2.678714] sit: IPv6 over IPv4 tunneling driver
[ 2.679170] NET: Registered protocol family 17
[ 2.679229] Key type dns_resolver registered
[ 2.679535] microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
[ 2.679559] microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
[ 2.679582] microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
[ 2.679595] microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
[ 2.679728] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.679752] Using IPI No-Shortcut mode
[ 2.680229] registered taskstats version 1
[ 2.680856] Btrfs loaded
[ 2.681530] Magic number: 1:69:181
[ 2.681632] tty ttyr7: hash matches
[ 2.681828] rtc_cmos 00:01: setting system clock to 2017-01-28 13:11:49 UTC (1485609109)
[ 2.682001] PM: Hibernation image not present or could not be loaded.
[ 2.682661] Freeing unused kernel memory: 452K (c1738000 - c17a9000)
[ 2.848421] random: udevadm urandom read with 10 bits of entropy available
[ 2.969271] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 3.083786] usb 1-4: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 3.096266] tsc: Refined TSC clocksource calibration: 1662.681 MHz
[ 3.096278] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f77166221, max_idle_ns: 440795255189 ns
[ 3.096356] clocksource: Switched to clocksource tsc
[ 3.120420] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
[ 3.122079] BTRFS: device fsid b42fb5e4-58d9-48d1-864b-b718a7483f3e devid 1 transid 524 /dev/sda1
[ 3.122964] BTRFS info (device sda1): disk space caching is enabled
[ 3.129033] BTRFS: detected SSD devices, enabling SSD mode
[ 3.187236] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 3.303260] hub 1-5:1.0: USB hub found
[ 3.303619] hub 1-5:1.0: 4 ports detected
[ 3.398230] BTRFS info (device sda1): disk space caching is enabled
[ 3.569183] usb 1-5.2: new high-speed USB device number 5 using ehci-pci
[ 3.610178] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.791300] input: SIGMACH1P USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:1C4F:0016.0001/input/input5
[ 3.842651] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACH1P USB Keyboard] on usb-0000:00:1d.3-1/input0
[ 3.923575] input: SIGMACH1P USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:1C4F:0016.0002/input/input6
[ 3.974380] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACH1P USB Keyboard] on usb-0000:00:1d.3-1/input1
[ 4.503591] i2c /dev entries driver
[ 4.515804] systemd-udevd[469]: starting version 215
[ 4.629441] Linux agpgart interface v0.103
[ 4.669295] snd_hda_intel 0000:03:00.1: Disabling MSI
[ 4.717130] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.718304] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf81f4000, 00:01:2e:bc:43:29, XID 081000c0 IRQ 28
[ 4.718318] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.727607] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.727622] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.727632] snd_hda_codec_realtek hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.727640] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 4.727648] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 4.727656] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 4.727665] snd_hda_codec_realtek hdaudioC0D2: Mic=0x18
[ 4.746840] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.747341] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.757177] w83627ehf: Found W83667HG-B chip at 0xa10
[ 4.762788] [drm] Initialized drm 1.1.0 20060810
[ 4.817866] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.859881] nvidia: module license 'NVIDIA' taints kernel.
[ 4.859892] Disabling lock debugging due to kernel taint
[ 4.920670] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.922864] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
[ 4.922894] NVRM: loading NVIDIA UNIX x86 Kernel Module 340.96 Sun Nov 8 21:45:55 PST 2015
[ 5.061167] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input9
[ 5.062088] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input10
[ 5.062577] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input11
[ 5.063136] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input12
[ 5.344916] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 5.956275] r8169 0000:01:00.0 eth0: link down
[ 5.956280] r8169 0000:01:00.0 eth0: link down
[ 5.956391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.096668] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 7.516053] r8169 0000:01:00.0 eth0: link up
[ 7.516071] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.982269] random: nonblocking pool is initialized
[ 8.001461] UDF-fs: warning (device sda2): udf_fill_super: No partition found (2)
[ 8.002897] XFS (sda2): Mounting V4 Filesystem
[ 8.063669] XFS (sda2): Ending clean mount
[ 8.736394] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 10.417137] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 12.048946] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 13.700167] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 13.899986] NVRM: Your system is not currently configured to drive a VGA console
[ 13.899996] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 13.900002] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 13.900007] NVRM: drivers including, but not limited to, vesafb, may result in
[ 13.900012] NVRM: corruption and stability problems, and is not supported.
[ 801.687479] WARNING: You are using an experimental version of the media stack.
[ 801.687479] As the driver is backported to an older kernel, it doesn't offer
[ 801.687479] enough quality for its usage in production.
[ 801.687479] Use it with care.
[ 801.687479] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 801.687479] 1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[ 801.687479] ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[ 801.687479] 5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[ 801.687479] experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[ 801.687479] v4l-dvb-saa716x: 3b9fce66666a32ddf2b94ac7e72e540773f3e353 saa716x_ff: Avoid sleeping in fifo_worker
[ 801.691972] WARNING: You are using an experimental version of the media stack.
[ 801.691972] As the driver is backported to an older kernel, it doesn't offer
[ 801.691972] enough quality for its usage in production.
[ 801.691972] Use it with care.
[ 801.691972] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 801.691972] 1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[ 801.691972] ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[ 801.691972] 5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[ 801.691972] experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[ 801.691972] v4l-dvb-saa716x: 3b9fce66666a32ddf2b94ac7e72e540773f3e353 saa716x_ff: Avoid sleeping in fifo_worker
[ 801.698453] usbcore: registered new interface driver dw2102
--- End code ---
lsmod
--- Code: ---Module Size Used by Tainted: P
dvb_usb_dw2102 34639 0
dvb_usb 12166 1 dvb_usb_dw2102
dvb_core 61536 2 dvb_usb_dw2102,dvb_usb
rc_core 12972 2 dvb_usb_dw2102,dvb_usb
snd_hda_codec_hdmi 28155 4
nvidia 9475342 45
i2c_i801 8742 0
w83627ehf 22185 0
hwmon_vid 1804 1 w83627ehf
drm 191265 3 nvidia
snd_hda_codec_realtek 43221 1
snd_hda_codec_generic 36871 1 snd_hda_codec_realtek
r8169 50216 0
mii 2963 1 r8169
snd_hda_intel 14882 2
snd_hda_codec 53652 4 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
coretemp 4136 0
snd_hda_core 23436 5 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec
snd_hwdep 3829 1 snd_hda_codec
snd_pcm 50836 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_timer 12852 1 snd_pcm
snd 35872 10 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
intel_agp 7888 0
intel_gtt 8466 1 intel_agp
agpgart 17922 3 drm,intel_agp,intel_gtt
uinput 5293 0
i2c_dev 3474 0
--- End code ---
lsusb
--- Code: ---Bus 001 Device 005: ID 0ccd:0105 TerraTec Electronic GmbH
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 734c:5928 TBS Technologies China Q-Box II DVB-S2 HD
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 1c4f:0016 SiGma Micro
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
--- End code ---
P3f:
Hallo Higgs,
ich habe ebenfalls dieses USB-DVB Device unter der MLD 5.3 im Einsatz.
Es waren da ein paar Anpassungen notwendig, das diese Box funktioniert. Magst Du bitte mal die MLD 5.3 bei dir starten, reicht ja mit einem Live-USB-Stick :-)
Das Problem ist im Moment noch, das wir die DVB-TBS Treiber getrennt von den DVB-Kernel haben. Somit ist es aktuell noch nicht möglich beide Karten gleichzeitig einzusetzen. Wenn Du aber unter der MLD 5.3 die USB-DVB ebenfalls aktiviert bekommst, dann schaue ich gerne mal was wir machen können um die DVB-TBS mit einem einzelnen Paket anbieten. Im Moment schließen sich die Pakete untereinander aus.
--- Code: ---lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 004: ID 0ccd:0105
Bus 001 Device 002: ID 8087:07e6
Bus 001 Device 003: ID 05e3:0608
lsmod
Module Size Used by Tainted: G
lirc_serial 7399 3
lirc_dev 7135 1 lirc_serial
snd_hda_codec_hdmi 29121 1
snd_hda_codec_realtek 52446 1
snd_hda_codec_generic 42270 1 snd_hda_codec_realtek
dvb_usb_dvbsky 8916 0
dvb_usb_v2 11904 1 dvb_usb_dvbsky
rc_tt_1500 1260 0
ts2020 5879 1
m88ds3103 11111 2 dvb_usb_dvbsky
i2c_mux 3946 1 m88ds3103
i915 985087 4
drm_kms_helper 87153 1 i915
drm 223227 5 i915,drm_kms_helper
dvb_usb_dw2102 50906 12
dvb_usb 13890 1 dvb_usb_dw2102
dvb_core 81722 5 dvb_usb_dvbsky,dvb_usb_v2,m88ds3103,dvb_usb_dw2102,dvb_usb
intel_gtt 10868 1 i915
snd_hda_intel 18033 2
r8169 56990 0
mii 3587 1 r8169
agpgart 21378 2 drm,intel_gtt
rc_core 14973 7 lirc_dev,dvb_usb_dvbsky,dvb_usb_v2,rc_tt_1500,dvb_usb_dw2102,dvb_usb
i2c_i801 11632 0
i2c_smbus 2977 1 i2c_i801
snd_hda_codec 62630 4 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 37879 5 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec
snd_hwdep 4793 1 snd_hda_codec
snd_pcm 60099 5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_timer 16391 1 snd_pcm
snd 46690 10 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
video 26178 1 i915
nct6775 34612 0
hwmon_vid 2212 1 nct6775
coretemp 5276 0
uinput 7007 1
i2c_dev 4586 0
--- End code ---
Hoffe das es verständlich war(ist).
Gruß,
Pit
clausmuus:
Eventuell gehen ja mit der MLD-5.3 sogar beide Karten gleichzeitig mit einem der dvb-Treiber Pakete (dvb, dvb-mbe oder dvb-tbs)
Claus
Navigation
[0] Message Index
[#] Next page
Go to full version