MLD-5.x > General

Kernel 3.19 upgrade

(1/2) > >>

piano:
Hallo

I have just made a new installation on a Zotac ZBox - the CI323. But I have no picture.
It seems the chips needs at least a 3.19 kernel to provide the graphics

The MLD-5 kernel is 3.16. Is there any way of upgrading this to 3.19

Or is there any other possible work arounds.

Some help here would be really much appreciated
Thanks

clausmuus:
Hi,

Pit do some tests with a 4.3 kernel on his devel server. Please ask him to get a testing image of this, and tell him the type of the graphik card of your system.

Claus

P3f:
Good Morning Piano,

i have actual the new stable linux kernel 4.4.1 at my own development enviroment. If you qnt to test the image it is possible with the follow netinstall ISO-image.

https://www.dropbox.com/s/mq7kfgotunx0pzx/MLD-5_netinstall_2016.02.04-172.6%2B1383%2Bkernel4_amd64.iso?dl=0

After you have install or start with the livemodus on your choice, please make an Debug-Log directly from the problems page.

Let me know, if you must get any new kernelswitches for comipiling within.

Regards,
Pit

piano:
Thanks Pit, that worked. I now have sound and image.
But there's just one problem: the screen is overlaid with flickering green bars - like interlace lines.

On the TV screen the OSD displays correctly (on top of the flickering lines); but using the remote control option, on the webpage, the OSD displays as a coloured overlay of green bars, nothing displayed.

I am sure it must be one of the options of softhddevice but I don't know which.
Any suggestions, please.

Peter

piano:
Hi Pit

Here's the key for the Debug-Log:  LPICCe

I have managed to lose the green lines by stoping hw decoding in the softhddevice plugin.
But its not satisfactory as it stresses the processor on HD material as there are sync issues and staggering.
It may have something to do with not using transfer mode correctly.
Maybe the logs will show something.

Thanks for looking
Peter

Navigation

[0] Message Index

[#] Next page