[gelöst] Streamdev-Client: Kein TV Bild

MLD-5.x > Raspberry PI

<< < (2/3) > >>

skippy:
wenn es immer noch nicht funktioniert, dann setz bitte mal den Loglevel des VDR auf 3 - s. Anlage. Danach Restart VDR und auf der Konsole

--- Code: ---less messages | grep streamdev
--- End code ---

eingeben. Bei mir erscheint dann:

--- Code: ---MLD-WoZi> less messages | grep streamdev
Nov 28 12:59:23 (MLD) user.info vdr: [16208] loading plugin: /usr/lib/vdr/libvdr-streamdev-client.so.2.2.0
Nov 28 12:59:23 (MLD) user.info vdr: [16208] initializing plugin: streamdev-client (0.6.1-git): VTP Streaming Client
Nov 28 12:59:23 (MLD) user.info vdr: [16208] streamdev-client: got device number 2
Nov 28 12:59:24 (MLD) user.info vdr: [16208] starting plugin: streamdev-client
Nov 28 12:59:24 (MLD) user.info vdr: [16208] streamdev-client: Connected to server <meine-ip-des-Servers>:2004 using protocol version 1.0
Nov 28 12:59:24 (MLD) user.debug vdr: [16643] streamdev-client: sections assembler thread started (pid=16208, tid=16643, prio=high)

--- End code ---

Viele Grüße skippy

skippy:

--- Quote from: Felix on November 28, 2015, 13:04:57 ---Die Kanalliste habe ich dann vom Server direkt nach /etc/vdr/channels/ kopiert und anschließend übers WebInterface ausgewählt.

--- End quote ---

Unter /etc/vdr ist ein Link auf die Kanalliste. Hast du den auch angepasst bzw. die Kanalliste so genannt, dass der Link passt?

--- Code: ---lrwxrwxrwx 1 root root 55 Nov 28 12:59 channels.conf -> /etc/vdr/channels/DVB-Auto-Server-channellist.user.conf
--- End code ---

Viele Grüße skippy

Felix:
Nach Ändern des Loglevel auf erscheint:

less /var/log/messages

--- Code: ---Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-rpihddevice.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-apt.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-remoteosd.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-remotetimers.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-setup.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-streamdev-client.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-svdrpservice.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/setup.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/sources.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/diseqc.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/scr.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/channels.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/timers.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/reccmds.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/svdrphosts.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/remote.conf
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/keymacros.conf
Nov 28 13:14:54 (none) user.debug vdr: [12524] video directory scanner thread started (pid=12523, tid=12524, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12523] registered source parameters for 'A - ATSC'
Nov 28 13:14:54 (none) user.debug vdr: [12525] video directory scanner thread started (pid=12523, tid=12525, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12523] registered source parameters for 'C - DVB-C'
Nov 28 13:14:54 (none) user.debug vdr: [12523] registered source parameters for 'S - DVB-S'
Nov 28 13:14:54 (none) user.debug vdr: [12523] registered source parameters for 'T - DVB-T'
Nov 28 13:14:54 (none) user.debug vdr: [12526] epg data reader thread started (pid=12523, tid=12526, prio=high)
Nov 28 13:14:54 (none) user.info vdr: [12523] no DVB device found
Nov 28 13:14:54 (none) user.debug vdr: [12526] reading EPG data from /var/cache/vdr/epg.data
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: rpihddevice (0.1.0): HD Ausgabegerät für Raspberry Pi
Nov 28 13:14:54 (none) user.debug vdr: [12526] epg data reader thread ended (pid=12523, tid=12526)
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: supported HDMI modes:
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[01]: 640x 480@60p | 4:3 | 25.200MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[02]: 720x 480@60p | 4:3 | 27.027MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[03]: 720x 480@60p | 16:9 | 27.027MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[04]: 1280x 720@60p | 16:9 | 74.250MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[05]: 1920x1080@60i | 16:9 | 74.250MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[06]: 720x 480@60i | 4:3 | 27.027MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[07]: 720x 480@60i | 16:9 | 27.027MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[16]: 1920x1080@60p | 16:9 | 148.500MHz (native)
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[17]: 720x 576@50p | 4:3 | 27.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[18]: 720x 576@50p | 16:9 | 27.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[19]: 1280x 720@50p | 16:9 | 74.250MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[20]: 1920x1080@50i | 16:9 | 74.250MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[21]: 720x 576@50i | 4:3 | 27.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[22]: 720x 576@50i | 16:9 | 27.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[31]: 1920x1080@50p | 16:9 | 148.500MHz (native) (current)
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: CEA[32]: 1920x1080@24p | 16:9 | 74.250MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[04]: 640x 480@60p | 4:3 | 25.200MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[05]: 640x 480@72p | 4:3 | 31.500MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[06]: 640x 480@75p | 4:3 | 31.500MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[08]: 800x 600@56p | 4:3 | 36.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[09]: 800x 600@60p | 4:3 | 40.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[10]: 800x 600@72p | 4:3 | 50.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[11]: 800x 600@75p | 4:3 | 49.500MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[16]: 1024x 768@60p | 4:3 | 65.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[17]: 1024x 768@70p | 4:3 | 75.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[18]: 1024x 768@75p | 4:3 | 78.750MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[35]: 1280x1024@60p | 5:4 | 108.000MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[39]: 1360x 768@60p | 16:9 | 85.500MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[42]: 1400x1050@60p | 4:3 | 121.750MHz
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: DMT[51]: 1600x1200@60p | 4:3 | 162.000MHz
Nov 28 13:14:54 (none) user.info vdr: [12523] rpihddevice: HwInit() done, using HDMI video out at 1920x1080
Nov 28 13:14:54 (none) user.debug vdr: [12523] new device number 1
Nov 28 13:14:54 (none) user.debug vdr: [12523] cTimeMs: using monotonic clock (resolution is 1 ns)
Nov 28 13:14:54 (none) user.debug vdr: [12524] video directory scanner thread ended (pid=12523, tid=12524)
Nov 28 13:14:54 (none) user.debug vdr: [12525] video directory scanner thread ended (pid=12523, tid=12525)
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: apt (0.1.0): Pakete verwalten
Nov 28 13:14:54 (none) user.debug vdr: [12534] audio decoder thread started (pid=12523, tid=12534, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12534] rpihddevice: cAudioDecoder() thread started
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: remoteosd (1.0.0): Zugriff auf Menü eines anderen VDR
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: remotetimers (1.0.1): Timer eines anderen VDR bearbeiten
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: setup (0.3.1-zulu-edition): System Setup
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: streamdev-client (0.6.1-git): VTP Streaming Client
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: svdrpservice (1.0.0): SVDRP client
Nov 28 13:14:54 (none) user.info vdr: [12523] setting primary device to 1
Nov 28 13:14:54 (none) user.debug vdr: [12523] rpihddevice: new cOsdProvider()
Nov 28 13:14:54 (none) user.debug vdr: [12535] ovgthread thread started (pid=12523, tid=12535, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12535] rpihddevice: cOvgThread() thread started
Nov 28 13:14:54 (none) user.debug vdr: [12523] assuming manual start of VDR
Nov 28 13:14:54 (none) user.info vdr: [12523] SVDRP listening on port 6419
Nov 28 13:14:54 (none) user.info vdr: [12523] setting current skin to "classic"
Nov 28 13:14:54 (none) user.info vdr: [12523] loading /etc/vdr/themes/classic-default.theme
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: rpihddevice
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: apt
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: remoteosd
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: remotetimers
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: setup
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: streamdev-client
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: svdrpservice
Nov 28 13:14:54 (none) user.debug vdr: [12536] remotetimers update file watcher thread started (pid=12523, tid=12536, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12536] remotetimers update file watcher now monitoring '/data/tv/.update'
Nov 28 13:14:54 (none) user.debug vdr: [12537] LIRC remote control thread started (pid=12523, tid=12537, prio=high)
Nov 28 13:14:54 (none) user.debug vdr: [12523] remote control LIRC - keys known
Nov 28 13:14:54 (none) user.debug vdr: [12523] remote control KBD - keys known
Nov 28 13:14:54 (none) user.debug vdr: [12538] KBD remote control thread started (pid=12523, tid=12538, prio=high)
Nov 28 13:14:54 (none) user.info vdr: [12523] switching to channel 1 (Das Erste HD)
Nov 28 13:14:54 (none) user.info vdr: [12523] info: Kanal nicht verfügbar!
Nov 28 13:14:54 (none) user.info vdr: [12535] rpihddevice: loading /usr/share/fonts/truetype/VDRSymbolsSans.ttf ...
Nov 28 13:14:58 (none) user.debug vdr: [12523] setting watchdog timer to 60 seconds
Nov 28 13:14:58 (none) user.debug vdr: [12523] OSD size changed to 1920x1080 @ 1,77778
Nov 28 13:14:59 (none) user.debug vdr: [12523] max. latency time 1 seconds

--- End code ---

less messages | grep streamdev

--- Code: ---Nov 28 13:14:54 (none) user.info vdr: [12523] loading plugin: /usr/lib/vdr/libvdr-streamdev-client.so.2.2.0
Nov 28 13:14:54 (none) user.info vdr: [12523] initializing plugin: streamdev-client (0.6.1-git): VTP Streaming Client
Nov 28 13:14:54 (none) user.info vdr: [12523] starting plugin: streamdev-client

--- End code ---

Der Link auf die Kanalliste sieht auch gut aus:
lrwxrwxrwx 1 root root 42 Nov 28 13:14 channels.conf -> /etc/vdr/channels/serverchannels.user.conf

Viele Grüße
Felix

skippy:
es fehlt die Meldung, dass er sich mit dem Server verbindet. Ich habe aber momentan keine Idee, warum er es nicht schafft.

//edit: Es fehlt auch noch die Meldung, welches Device er für Streamdev nimmt => bei mir:

--- Code: ---Nov 28 12:59:23 (MLD) user.info vdr: [16208] streamdev-client: got device number 2

--- End code ---

Viele Grüße skippy

skippy:
Ich glaube ich habe es. Bei dir in der /etc/vdr/setup.conf ist der Parameter

--- Code: ---streamdev-client.StartClient = 0

--- End code ---

Bei mir steht er auf 1. Wenn ich mich richtig erinnere, konnte man das früher in den Plugin-Einstellungen setzen. Dort finde ich den Parameter nicht mehr. Keine Ahnung, warum der weg ist. Bevor du den Wert in der setup.conf änderst, bitte vorher den VDR stoppen und danach wieder starten.

Viele Grüße skippy

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version