Archiv > Development

Seltsames Problem bei Neuinstallation

<< < (4/6) > >>

clausmuus:
Du meinst beim softhddevice Plugin? Beim dev Paket sind einige Patchesenthelten, die eventuell für Probleme bei einigen Usern verantwortlich sind.

Claus

pbriesch:
OK, danke.

MarMic:
shd -> nvidia karten: softhddevice wie es von jones beabsichtigt ist clean aus seiner quelle
shd-dev -> auch intel karten: softhddevice gepatcht für intel vaapi support aus einer ganz anderen quelle

d.h. intel fraktion muss shd-dev nehmen und die nvidia fraktion sollte shd nehmen

greetz MarMic

pbriesch:
Danke für die Erklärung. Im Webif konnte ich keinen Hinweis darauf finden.

So: Nochmal mit 4.0.1-64-2015.02.18-106 Standard mit SoftHDdevice Frontend installiert.

Leider funktioniert es nicht, die selben Symptome wie vorher auch.
Noch zur Info: Ich habe einen ACER Aspire easyStore H340 http://www.home-server-blog.de/2009/05/17/testbericht-acer-aspire-easystore-h430-teil-1-berblick-und-inbetriebnahme/
Auf dem Motherboard ist ein Intel-Graphikchip verbaut. Die VDR-Ausgabe erfolgt über eine zusätzlich eingebaute NVIDIA-Graphikkarte. DMESG-Ausgabe kann ich, wenn gewünscht, liefern.

pbriesch:
Anbei die Ausgabe von dmesg. MLD läuft von der CD. Man beachte die letzten Zeilen.
Spoiler (show / hide)
--- Code: ---MLD> dmesg
Linux version 3.16.1.131 (nightbuild2@mld-nb2-srv) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #1 SMP Sun Feb 15 02:18:47 CET 2015
Command line: vga=0x314 splash=silent quiet nodialog apm=off initrd=/initrd BOOT_IMAGE=/kernel
Disabled fast string operations
.
. usw.
.
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded
  Magic number: 3:849:289
tty ttyz3: hash matches
tty tty22: hash matches
acpi PNP0400:02: hash matches
rtc_cmos 00:01: setting system clock to 2015-02-18 17:15:20 UTC (1424279720)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 776K (ffffffff817ac000 - ffffffff8186e000)
BTRFS: device fsid c9b9d60c-3b6c-49ba-b1a6-a796aeec2573 devid 1 transid 16 /dev/sda1
BTRFS info (device sda1): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
tsc: Refined TSC clocksource calibration: 1600.061 MHz
Switched to clocksource tsc
XFS (sda2): Mounting V4 Filesystem
usb 1-3: new high-speed USB device number 2 using ehci-pci
XFS (sda2): Ending clean mount
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-3:1.0
usb 1-8: new high-speed USB device number 4 using ehci-pci
usb-storage 1-8:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-8:1.0
usb 4-1: new low-speed USB device number 2 using uhci_hcd
input: Riitek Micro Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:1997:0409.0001/input/input5
hid-generic 0003:1997:0409.0001: input,hidraw0: USB HID v1.11 Keyboard [Riitek Micro Keyboard] on usb-0000:00:1d.2-1/input0
input: Riitek Micro Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:1997:0409.0002/input/input6
hid-generic 0003:1997:0409.0002: input,hidraw1: USB HID v1.11 Mouse [Riitek Micro Keyboard] on usb-0000:00:1d.2-1/input1
BTRFS info (device sda1): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
XFS (sda2): Mounting V4 Filesystem
scsi 8:0:0:0: CD-ROM            HL-DT-ST BD-RE  BE12LU38  1.00 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg1 type 5
XFS (sda2): Ending clean mount
random: nonblocking pool is initialized
scsi 9:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 501760 512-byte logical blocks: (256 MB/245 MiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 9:0:0:0: [sdb] Attached SCSI disk
BTRFS info (device sda1): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
XFS (sda2): Mounting V4 Filesystem
XFS (sda2): Ending clean mount
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
i2c /dev entries driver
systemd-udevd[4016]: starting version 204
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
snd_hda_intel 0000:02:00.1: Disabling MSI
sky2: driver version 1.30
sky2 0000:09:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:09:00.0: irq 41 for MSI/MSI-X
sky2 0000:09:00.0 eth0: addr 00:26:2d:00:27:06
sky2 0000:09:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:09:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.65  Tue Dec  2 09:50:34 PST 2014
nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
MLD>

--- End code ---
Und hier lsmodSpoiler (show / hide)
--- Code: ---MLD> lsmod
Module                  Size  Used by    Tainted: P
nvidia              10482575 45
drm                   187197  3 nvidia
snd_hda_codec_hdmi     30854  4
sky2                   41387  0
snd_hda_intel          15619  1
snd_hda_controller     13590  1 snd_hda_intel
snd_hda_codec          65804  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
snd_hwdep               4843  1 snd_hda_codec
snd_pcm                57822  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller,snd_hda_codec
snd_timer              14439  1 snd_pcm
snd                    45295  8 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
intel_agp               9904  0
intel_gtt              10310  2 intel_agp
agpgart                21121  3 drm,intel_agp,intel_gtt
uinput                  6084  0
i2c_dev                 4217  0
MLD>
--- End code ---

Nach dem Abwählen des softhddevice Plugins have ich das dummy-device Plugin installiert, um zu sehen, ob es am softhddevice Plugin liegt. Dann Installation und Neustart.
Leider immer noch das gleiche Ergebnis, der Rechner schmiert ab.

Navigation

[0] Message Index

[#] Next page

[*] Previous page