Archiv > Raspberry PI
Some questions on MLD on pi (From non German speaker!)
Linus:
Ok, i will try this package, even if it's not needed. For the pi, just the command line à said is enouth to change the governor.
Has i said, i have already change the key to + and - in the config file, and it has changed nothing. But i do not restart after that.
You could test it again, perhaps i have made something wrong. ;)
You could invers the 1/3 key with left and right too because by default left and right are fast jump, not lot low jump.
And to play a video fast jump is to fast.
clausmuus:
Hi,
I will test the volume part by me self, to see how I must change the mplayer plugin to get the correct keys.
By the way: You must use the omxplayer.sh to check the key binding that is used by the plugin. And there is no way to make shorter jumps, without compile the omxplayer myself.
Claus
Linus:
In fact, the short jump is on the 1 and 3 key, you could test, you have got big jump in left and right, and short jump in 1 and 3.
We should invert that.
EDIT: "-o both" works.
EDIT:
--- Quote ---omxplayer -k
Key bindings :
1 decrease speed
2 increase speed
< rewind
> fast forward
z show info
j previous audio stream
k next audio stream
i previous chapter
o next chapter
n previous subtitle stream
m next subtitle stream
s toggle subtitles
d decrease subtitle delay (- 250 ms)
f increase subtitle delay (+ 250 ms)
q exit omxplayer
p / space pause/resume
- decrease volume
+ / = increase volume
left arrow seek -30 seconds
right arrow seek +30 seconds
down arrow seek -600 seconds
up arrow seek +600 seconds
--- End quote ---
We should bind the < and > key in fact.
And perhaps we should put the sound lower on launch.
--- Quote ---omxplayer -h
Usage: omxplayer [OPTIONS] [FILE]
Options :
-h / --help print this help
-v / --version print version info
-k / --keys print key bindings
-n / --aidx index audio stream index : e.g. 1
-o / --adev device audio out device : e.g. hdmi/local/both
-i / --info dump stream format and exit
-s / --stats pts and buffer stats
-p / --passthrough audio passthrough
-d / --deinterlace force deinterlacing
--nodeinterlace force no deinterlacing
-w / --hw hw audio decoding
-3 / --3d mode switch tv into 3d mode (e.g. SBS/TB)
-y / --hdmiclocksync adjust display refresh rate to match video (default)
-z / --nohdmiclocksync do not adjust display refresh rate to match video
-t / --sid index show subtitle with index
-r / --refresh adjust framerate/resolution to video
-g / --genlog generate log file
-l / --pos n start position (hh:mm:ss)
-b / --blank set background to black
--loop loop file. Ignored if file is not seekable, start position applied if given
--no-boost-on-downmix don't boost volume when downmixing
--vol n Set initial volume in millibels (default 0)
--amp n Set initial amplification in millibels (default 0)
--no-osd do not display status information on screen
--subtitles path external subtitles in UTF-8 srt format
--font path subtitle font
(default: /usr/share/fonts/truetype/freefont/FreeSans.ttf)
--italic-font path (default: /usr/share/fonts/truetype/freefont/FreeSansOblique.ttf)
--font-size size font size as thousandths of screen height
(default: 55)
--align left/center subtitle alignment (default: left)
--no-ghost-box no semitransparent boxes behind subtitles
--lines n number of lines to accommodate in the subtitle buffer
(default: 3)
--win "x1 y1 x2 y2" Set position of video window
--audio_fifo n Size of audio output fifo in seconds
--video_fifo n Size of video output fifo in MB
--audio_queue n Size of audio input queue in MB
--video_queue n Size of video input queue in MB
--threshold n Amount of buffered data required to come out of buffering in seconds
--orientation n Set orientation of video (0, 90, 180 or 270)
--fps n Set fps of video where timestamps are not present
--live Set for live tv or vod type stream
--layout Set output speaker layout (e.g. 5.1)
--dbus_name name Set D-Bus bus name
(default: org.mpris.MediaPlayer2.omxplayer)
--key-config <file> Uses key bindings specified in <file> instead of the default
--layer n Set the video render layer number (higher numbers are on top)
--- End quote ---
EDIT: i found a way for the usb key:
eject /dev/sda ==> the key turn off
hub-ctrl -h 0 -P 3 -p 0 ==> It turn off power of the key
hub-ctrl -h 0 -P 3 -p 1 ==> The key turn on.
In fact i think that we should unmount before.
But it's near to work. :)
EDIT:
here is the command i have to put in /etc.init.d/rc.suspend:
When going to suspens:
umount /mnt/data
umount /var/cache
sleep 2
eject /dev/sda
sleep 1
hub-ctrl -h 0 -P 3 -p 0
When i wake up:
hub-ctrl -h 0 -P 3 -p 1
sleep 2
mount /dev/sda1 /mnt/data
mount /dev/sda1 /var/cache
And it works! :)
Linus:
Hello, i have got some "scrash" sound when playing tv, i was thinking that it was related to the analog part, but even if i put the sound by hdmi i got this "crap" sound, it hapen some times, not always etc. I do not know if it's only because it is a "B" and not a B+ that solve this probel (but normally it should happen to the analog output and not on the HDMI output)?
clausmuus:
Only the analog output oft the B is Bad. Not the hdmi. That must habe an other reason.
Claus
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version