Installation MLD-4.0.1-rpi_rpi-client_2014.06.15-64 schlägt fehl

Archiv > Raspberry PI

(1/2) > >>

peter_mld:
Hallo zusammen,
um zu testen ob der Fehler aus http://www.minidvblinux.de/forum/index.php/topic,5852.msg43176.html behoben ist habe ich mein Testsystem mit dem Stand aus MLD-4.0.1-rpi_rpi-client_2014.06.15-64.tgz neu aufgesetzt.

Nach dem Booten habe ich versucht über das Menue das System zu installieren.

Das System bleibt bei der Bildschirmanzeige "format disk mmcblk0p2 ..." hängen
Irgendwelche Ideen?

/var/log/install.log:

--- Code: ---==start installation==

==partitioning disk mmcblk0==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.

The number of cylinders for this disk is set to 15807.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-15807, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-15807, default 15807):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (97-15807, default 97): Using default value 97
Last cylinder or +size or +sizeM or +sizeK (97-15807, default 15807):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1052-15807, default 1052): Using default value 1052
Last cylinder or +size or +sizeM or +sizeK (1052-15807, default 15807): Using default value 15807

Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32)

Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table

Disk /dev/mmcblk0: 16.5 GB, 16574840832 bytes
64 heads, 32 sectors/track, 15807 cylinders, total 32372736 sectors
Units = sectors of 1 * 512 = 512 bytes

Device Boot Start End Blocks Id System
/dev/mmcblk0p1 32 196607 98288 b Win95 FAT32
/dev/mmcblk0p2 196608 2152447 977920 83 Linux
/dev/mmcblk0p3 2152448 32372735 15110144 83 Linux
------ done ------

==format disk mmcblk0p1==
mkfs.vfat 3.0.13 (30 Jun 2012)
------ done ------

==format disk mmcblk0p2==
/dev/mmcblk0p2 is mounted

WARNING! - Btrfs Btrfs v0.19 IS EXPERIMENTAL
WARNING! - see http://btrfs.wiki.kernel.org before using

====== failed ======

--- End code ---

'cat /var/log/messages | grep kernel':

--- Code: ---Jan 1 00:01:09 (none) user.notice kernel: klogd started: BusyBox v1.22.1 (2014-06-06 19:43:24 UTC)
Jan 1 00:01:10 (none) daemon.info kernel: [ 70.921294] udevd[4129]: starting version 175
Jan 1 00:01:12 (none) user.warn kernel: [ 73.294693] XFS (mmcblk0p1): unknown mount option [nls].
Jan 1 00:01:13 (none) user.info kernel: [ 74.586785] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Jan 1 00:01:15 (none) user.info kernel: [ 76.118064] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jan 1 00:01:25 (none) user.info kernel: [ 86.719692] input: eventlircd as /devices/virtual/input/input3
Jun 20 14:38:45 (none) user.info kernel: [ 197.454846] rtc-test rtc-test.0: test_rtc_set_mmss, secs = 1403275125
Jun 20 14:38:57 (none) user.warn kernel: [ 209.645693] XFS (mmcblk0p1): unknown mount option [nls].
Jun 20 14:40:47 (none) user.info kernel: [ 319.807370] mmcblk0: p1 p2 p3
Jun 20 14:40:47 (none) user.info kernel: [ 319.899555] mmcblk0: p1 p2 p3
Jun 20 14:40:48 (none) user.notice kernel: [ 320.741831] XFS (mmcblk0p3): Mounting Filesystem
Jun 20 14:40:48 (none) user.info kernel: [ 320.762040] BTRFS: device fsid bfebda21-cb38-4d3f-a60a-26e24405a9f4 devid 1 transid 397 /dev/mmcblk0p2
Jun 20 14:40:48 (none) user.info kernel: [ 320.772134] BTRFS info (device mmcblk0p2): disk space caching is enabled
Jun 20 14:40:48 (none) user.info kernel: [ 320.796158] BTRFS: detected SSD devices, enabling SSD mode
Jun 20 14:40:49 (none) user.info kernel: [ 321.008920] XFS (mmcblk0p3): Ending clean mount
Jun 20 14:40:51 (none) user.notice kernel: [ 322.967701] XFS (mmcblk0p3): Mounting Filesystem
Jun 20 14:40:51 (none) user.info kernel: [ 322.987668] BTRFS: device fsid bfebda21-cb38-4d3f-a60a-26e24405a9f4 devid 1 transid 398 /dev/mmcblk0p2
Jun 20 14:40:51 (none) user.info kernel: [ 322.998786] BTRFS info (device mmcblk0p2): disk space caching is enabled
Jun 20 14:40:51 (none) user.info kernel: [ 323.026195] BTRFS: detected SSD devices, enabling SSD mode
Jun 20 14:40:51 (none) user.info kernel: [ 323.217499] XFS (mmcblk0p3): Ending clean mount

--- End code ---

mount:

--- Code: ---rootfs on / type rootfs (rw,size=189748k,nr_inodes=47437)
dev on /dev type devtmpfs (rw,relatime,size=189748k,nr_inodes=47437,mode=755)
rootfs on / type tmpfs (rw,relatime)
proc on /proc type proc (rw,relatime)
sys on /sys type sysfs (rw,relatime)
tmp on /tmp type tmpfs (rw,relatime)
run on /run type tmpfs (rw,relatime)
dev on /dev type devtmpfs (rw,relatime,size=189748k,nr_inodes=47437,mode=755)
log on /var/log type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
MLD_SERVER:/mnt/data on /mnt/data type nfs (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.178.47,mountvers=3,mountproto=tcp,local_lock=none,addr=192.168.178.47)
MLD_SERVER:/mnt/data/cache on /var/cache type nfs (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.178.47,mountvers=3,mountproto=tcp,local_lock=none,addr=192.168.178.47)
/dev/mmcblk0p2 on /media/sd-mmcblk0p2 type btrfs (rw,relatime,ssd,noacl,space_cache)
/dev/mmcblk0p3 on /media/sd-mmcblk0p3 type xfs (rw,relatime,attr2,inode64,noquota)

--- End code ---

clausmuus:
Hi,

der Fehler ist noch nicht behoben.

Das hängenbleiben beim Installieren passiert hin und wieder. Den Grund konnte ich bisher nicht herausfinden. Bei mir hat's aber bisher immer geholfen, einfach noch mal die Installation durchzuführen.

Claus

peter_mld:
Ok, danke.

Nach insgesamt 4 erfolglosen Versuchen via Bildschirmmenue (mit verschiedenen SD-Karten) habe ich versucht via Browser zu installieren.
Nach dem dritten Versuch über den Browser (immer wieder "installieren" geklickt) hat es geklappt:

--- Code: ---start installation
partitioning disk mmcblk0
format disk mmcblk0p1
format disk mmcblk0p2
format disk mmcblk0p3
install system on mmcblk0p2
write boot files on mmcblk0p1
Installation completed
done

--- End code ---

clausmuus:
Na, wenn der Fehler bei mir mal so zuverlässig häufig auftreten würde, hätte ich eventuell sogar ne Chance den zu finden ;)

Claus

peter_mld:
Die Installation der Version MLD-4.0.1-rpi_rpi-client_2014.06.20-64 klappte auf Anhieb :-\

Welche Informationen kann ich zur Fehlersuche zur Verfügung stellen wenn es wieder nicht klappen sollte?

Gruß,
Peter

Navigation

[0] Message Index

[#] Next page

Go to full version