Archiv > Development
Fernbedienung einrichten - rpi on GPIO - ich pack es nicht..
clausmuus:
Hi,
ne Änderung der Fernbedienungswahl wird direkt beim Speichern übernommen. Du kannst also bequem die anderen durchtesten. Wenn's nicht hilft musst Du halt die lircd.conf anpassen. Das geht im Webif.
Claus
anjoku:
Hi,
stimmt, das hatte ich gestern auch festgestellt....habe es einfach mal versucht....und nur die
hauppauge/lircd.conf.haupauge funktioniert bei mir ....halbwegs.
Dann werde ich mal versuchen die Datei anzupassen......
clausmuus:
Du musst in der lircd.conf das KEY_CHANNELUP durch nen KEY_RIGHT und das KEY_CHANNELDOWN durch nen KEY_LEFT ersetzen.
Claus
Holger:
Hi,
ich hänge mal meine lircd.conf an, die ich früher für (d)eine Hauppauge-FB verwendet habe.
Übers web-IF kannst Du die lircd.conf editieren ( alles was aktuell drin steht, löschen und den angehängten Inhalt einfügen und speichern).
Und dann - so hab ich es gemacht - unter System - TV - Remote(?) angeben, dass die Fernbedienung neu angelernt werden soll. Nach einem vdr restart wird im OSD der Anlerndialog angezeigt, über den Du den Tasten Deiner FB die gewünschte Belegung zuordnen kannst.
Und dann noch ein Foto der grossen Hauppauge-Fb, die mehr Optionen bietet...
Gruß
Holger
anjoku:
Oh jetzt war Holger schneller als ich ... ::)
Danke Holger....... :) Ich schau es mir an..
Ich lasse trotzdem drin was ich geschrieben hatte
Hi, danke... für den tip Claus :)
Ich weiss jetzt wie die Fernbedienung heisst: R808-HPG-S
Bist du sicher ? Mus ich nicht eher KEY_CHANNELUP durch nen KEY_UP und das KEY_CHANNELDOWN durch nen KEY_DOWN ersetzen?
Verstehe ich das richtig....ich ersetze den "KEY" und lass den Hexwert so stehen?
Gruß,
Andre
Ich habe die etc/Lircd.conf im editor offen.....aber an welcher Stelle muss ich es eintragen? Es gibt ja mehrere Abschniite mit Konfigurationen.
Spoiler (show / hide)#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner@gmx.net>
#
# brand: Hauppauge
# model:
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and
# original Hauppauge TV cards !!!
#
begin remote
name Hauppauge
bits 13
flags SHIFT_ENC
eps 30
aeps 100
one 950 830
zero 950 830
plead 960
gap 89584
repeat_bit 2
begin codes
KEY_TV 0x000000000000100F # Was: TV
KEY_RADIO 0x000000000000100C # Was: RADIO
KEY_F11 0x000000000000102E # Was: FULL_SCREEN
KEY_CHANNELUP 0x0000000000001020 # Was: CH+
KEY_CHANNELDOWN 0x0000000000001021 # Was: CH-
KEY_VOLUMEDOWN 0x0000000000001011 # Was: VOL-
KEY_VOLUMEUP 0x0000000000001010 # Was: VOL+
KEY_MUTE 0x000000000000100D # Was: MUTE
KEY_CYCLEWINDOWS 0x0000000000001022 # Was: SOURCE
KEY_1 0x0000000000001001 # Was: 1
KEY_2 0x0000000000001002 # Was: 2
KEY_3 0x0000000000001003 # Was: 3
KEY_4 0x0000000000001004 # Was: 4
KEY_5 0x0000000000001005 # Was: 5
KEY_6 0x0000000000001006 # Was: 6
KEY_7 0x0000000000001007 # Was: 7
KEY_8 0x0000000000001008 # Was: 8
KEY_9 0x0000000000001009 # Was: 9
KEY_0 0x0000000000001000 # Was: 0
RESERVED 0x000000000000101E
MINIMIZE 0x0000000000001026
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR 2/350
#
begin remote
name hauppauge_pvr
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
KEY_POWER2 0x00000000000017FD # Was: Power
KEY_PVR 0x00000000000017FB
KEY_1 0x00000000000017C1 # Was: 1
KEY_2 0x00000000000017C2 # Was: 2
KEY_3 0x00000000000017C3 # Was: 3
KEY_4 0x00000000000017C4 # Was: 4
KEY_5 0x00000000000017C5 # Was: 5
KEY_6 0x00000000000017C6 # Was: 6
KEY_7 0x00000000000017C7 # Was: 7
KEY_8 0x00000000000017C8 # Was: 8
KEY_9 0x00000000000017C9 # Was: 9
KEY_EXIT 0x00000000000017DF # Was: Back/Exit
KEY_0 0x00000000000017C0 # Was: 0
KEY_MENU 0x00000000000017CD # Was: Menu
KEY_RED 0x00000000000017CB # Was: Red
KEY_GREEN 0x00000000000017EE # Was: Green
KEY_YELLOW 0x00000000000017F8 # Was: Yellow
KEY_BLUE 0x00000000000017E9 # Was: Blue
KEY_CHANNELUP 0x00000000000017E0 # Was: Ch+
KEY_CHANNELDOWN 0x00000000000017E1 # Was: Ch-
KEY_VOLUMEDOWN 0x00000000000017D1 # Was: Vol-
KEY_VOLUMEUP 0x00000000000017D0 # Was: Vol+
KEY_OK 0x00000000000017E5 # Was: Ok
KEY_MUTE 0x00000000000017CF # Was: Mute
Blank 0x00000000000017CC
Full 0x00000000000017FC
KEY_REWIND 0x00000000000017F2 # Was: Rewind
KEY_PLAY 0x00000000000017F5 # Was: Play
KEY_FORWARD 0x00000000000017F4 # Was: Forward
KEY_RECORD 0x00000000000017F7 # Was: Record
KEY_STOP 0x00000000000017F6 # Was: Stop
KEY_PAUSE 0x00000000000017F0 # Was: Pause
KEY_AGAIN 0x00000000000017E4 # Was: Replay
KEY_NEXT 0x00000000000017DE # Was: Skip
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
#
# contributed by
#
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
#
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
KEY_PVR 0x00000000000017BB
KEY_POWER2 0x00000000000017BD # Was: Power
KEY_TV 0x000000000000179C # Was: TV
KEY_VIDEO 0x0000000000001798 # Was: Videos
KEY_AUDIO 0x0000000000001799 # Was: Music
KEY_IMAGES 0x000000000000179A # Was: Pictures
KEY_INFO 0x000000000000179B # Was: Guide
KEY_RADIO 0x000000000000178C # Was: Radio
KEY_UP 0x0000000000001794 # Was: Up
KEY_LEFT 0x0000000000001796 # Was: Left
KEY_RIGHT 0x0000000000001797 # Was: Right
KEY_DOWN 0x0000000000001795 # Was: Down
KEY_OK 0x00000000000017A5 # Was: OK
KEY_EXIT 0x000000000000179F # Was: Back/Exit
KEY_MENU 0x000000000000178D
KEY_VOLUMEUP 0x0000000000001790 # Was: Vol+
KEY_VOLUMEDOWN 0x0000000000001791 # Was: Vol-
KEY_CHANNELDOWN 0x0000000000001792 # Was: Prev.Ch
KEY_MUTE 0x000000000000178F # Was: Mute
KEY_CHANNELUP 0x00000000000017A0 # Was: Ch+
KEY_CHANNELDOWN 0x00000000000017A1 # Was: Ch-
KEY_RECORD 0x00000000000017B7 # Was: Record
KEY_STOP 0x00000000000017B6 # Was: Stop
KEY_REWIND 0x00000000000017B2 # Was: Rewind
KEY_PLAY 0x00000000000017B5 # Was: Play
KEY_FORWARD 0x00000000000017B4 # Was: Forward
KEY_REWIND 0x00000000000017A4
KEY_PAUSE 0x00000000000017B0 # Was: Pause
KEY_NEXT 0x000000000000179E
KEY_1 0x0000000000001781 # Was: 1
KEY_2 0x0000000000001782 # Was: 2
KEY_3 0x0000000000001783 # Was: 3
KEY_4 0x0000000000001784 # Was: 4
KEY_5 0x0000000000001785 # Was: 5
KEY_6 0x0000000000001786 # Was: 6
KEY_7 0x0000000000001787 # Was: 7
KEY_8 0x0000000000001788 # Was: 8
KEY_9 0x0000000000001789 # Was: 9
Asterix 0x000000000000178A
KEY_0 0x0000000000001780 # Was: 0
KEY_NUMERIC_POUND 0x000000000000178E # Was: #
KEY_RED 0x000000000000178B # Was: Red
KEY_GREEN 0x00000000000017AE # Was: Green
KEY_YELLOW 0x00000000000017B8 # Was: Yellow
KEY_BLUE 0x00000000000017A9 # Was: Blue
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
#
# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
# members of linux user group Vorarlberg www.lugv.at
#
# for ir remote controler from Hauppauge WinTV Nexus-S
# most of the keys are supported
#
# brand: Hauppauge
# model no. of remote control: WinTV Nexus-S
# devices being controlled by this remote:
#
begin remote
name Hauppauge_WinTV_Nexus-S
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 944 828
zero 944 828
plead 980
gap 113932
min_repeat 1
toggle_bit 2
begin codes
KEY_UP 0x0000000000001794 # Was: Up
KEY_DOWN 0x0000000000001795 # Was: Down
KEY_LEFT 0x0000000000001796 # Was: Left
KEY_RIGHT 0x0000000000001797 # Was: Right
KEY_POWER2 0x00000000000017BD # Was: Power
KEY_OK 0x00000000000017A5 # Was: Ok
KEY_MENU 0x000000000000178D # Was: Menu
KEY_BACK 0x000000000000179F # Was: Back
KEY_RED 0x000000000000178B # Was: Red
KEY_GREEN 0x00000000000017AE # Was: Green
KEY_YELLOW 0x00000000000017B8 # Was: Yellow
KEY_BLUE 0x00000000000017A9 # Was: Blue
KEY_0 0x0000000000001780 # Was: 0
KEY_1 0x0000000000001781 # Was: 1
KEY_2 0x0000000000001782 # Was: 2
KEY_3 0x0000000000001783 # Was: 3
KEY_4 0x0000000000001784 # Was: 4
KEY_5 0x0000000000001785 # Was: 5
KEY_6 0x0000000000001786 # Was: 6
KEY_7 0x0000000000001787 # Was: 7
KEY_8 0x0000000000001788 # Was: 8
KEY_9 0x0000000000001789 # Was: 9
KEY_PLAY 0x00000000000017B5 # Was: Play
KEY_PAUSE 0x00000000000017B0 # Was: Pause
KEY_STOP 0x00000000000017B6 # Was: Stop
KEY_RECORD 0x00000000000017B7 # Was: Record
KEY_FASTFORWARD 0x00000000000017B4 # Was: FastFwd
KEY_REWIND 0x00000000000017B2
KEY_CHANNELUP 0x00000000000017A0 # Was: Channel+
KEY_CHANNELDOWN 0x00000000000017A1 # Was: Channel-
KEY_VOLUMEUP 0x0000000000001790 # Was: Volume+
KEY_VOLUMEDOWN 0x0000000000001791 # Was: Volume-
KEY_MUTE 0x000000000000178F # Was: Mute
KEY_VIDEO 0x000000000000178A
KEY_RECORD 0x000000000000178E # Was: Recordings
KEY_BACK 0x000000000000179F # Was: Back
KEY_RECORD 0x00000000000017B7 # Was: Record
KEY_PAUSE 0x00000000000017B0 # Was: Pause
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.3pre1(default) on Sat Jun 21 12:36:46 2008
#
# contributed by Matthew Wright
#
# brand: Hauppauge (HRV-1600 RT Remote)
# model no. of remote control: A415-HPG-A
# devices being controlled by this remote:
#
begin remote
name Hauppauge
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 919 852
zero 919 852
plead 930
gap 112908
toggle_bit_mask 0x800
begin codes
KEY_POWER2 0x17BD # Was: power
KEY_PVR 0x17BB
KEY_TV 0x179C # Was: tv
KEY_VIDEO 0x1798 # Was: videos
KEY_AUDIO 0x1799 # Was: music
KEY_IMAGES 0x179A # Was: pictures
KEY_INFO 0x179B # Was: guide
KEY_RADIO 0x178C # Was: radio
KEY_EXIT 0x179F # Was: exit
KEY_MENU 0x178D # Was: menu
KEY_CHANNELDOWN 0x1792 # Was: prevch
KEY_MUTE 0x178F # Was: mute
KEY_UP 0x1794 # Was: up
KEY_DOWN 0x1795 # Was: down
KEY_LEFT 0x1796 # Was: left
KEY_RIGHT 0x1797 # Was: right
KEY_OK 0x17A5 # Was: ok
KEY_VOLUMEUP 0x1790 # Was: volup
KEY_VOLUMEDOWN 0x1791 # Was: voldown
KEY_CHANNELUP 0x17A0 # Was: chup
KEY_CHANNELDOWN 0x17A1 # Was: chdown
KEY_RECORD 0x17B7 # Was: record
KEY_STOP 0x17B6 # Was: stop
KEY_REWIND 0x17B2 # Was: rewind
KEY_FASTFORWARD 0x17B4 # Was: fastfwd
KEY_PLAY 0x17B5 # Was: play
KEY_AGAIN 0x17A4 # Was: replay
KEY_NEXT 0x179E # Was: skip
KEY_PAUSE 0x17B0 # Was: pause
KEY_1 0x1781 # Was: 1
KEY_2 0x1782 # Was: 2
KEY_3 0x1783 # Was: 3
KEY_4 0x1784 # Was: 4
KEY_5 0x1785 # Was: 5
KEY_6 0x1786 # Was: 6
KEY_7 0x1787 # Was: 7
KEY_8 0x1788 # Was: 8
KEY_9 0x1789 # Was: 9
KEY_NUMERIC_STAR 0x178A # Was: *
KEY_0 0x1780 # Was: 0
KEY_NUMERIC_POUND 0x178E # Was: #
KEY_RED 0x178B # Was: red
KEY_GREEN 0x17AE # Was: green
KEY_YELLOW 0x17B8 # Was: yellow
KEY_BLUE 0x17A9 # Was: blue
KEY_SUBTITLE 0x178E # Was: sub/cc
KEY_TEXT 0x178A # Was: text
KEY_HOME 0x17BB # Was: home
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.5(default) on Wed Dec 30 21:52:35 2009
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: MVP
#
begin remote
name Hauppauge_MVP
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 912 857
zero 912 857
plead 937
gap 113935
toggle_bit_mask 0x800
begin codes
KEY_1 0x10C1
KEY_2 0x10C2
KEY_3 0x10C3
KEY_4 0x10C4
KEY_5 0x10C5
KEY_6 0x10C6
KEY_7 0x10C7
KEY_8 0x10C8
KEY_9 0x10C9
KEY_0 0x10C0
KEY_POWER2 0x10FD
KEY_GOTO 0x10FB
KEY_BACK 0x10DF
KEY_MENU 0x10CD
KEY_RED 0x10CB
KEY_GREEN 0x10EE
KEY_YELLOW 0x10F8
KEY_BLUE 0x10E9
KEY_UP 0x10E0
KEY_DOWN 0x10E1
KEY_LEFT 0x10D1
KEY_RIGHT 0x10D0
KEY_MUTE 0x10CF
KEY_FN_1 0x10CC
KEY_FN_2 0x10FC
KEY_OK 0x10E5
KEY_REWIND 0x10F2
KEY_FASTFORWARD 0x10F4
KEY_PLAY 0x10F5
KEY_RECORD 0x10F7
KEY_STOP 0x10F6
KEY_PAUSE 0x10F0
KEY_PREVIOUS 0x10E4
KEY_NEXT 0x10DE
end codes
end remote
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version