Archiv > Development
Test MLD-4 ISO
P3f:
Hallo Gerhard,
nur mal nebenbei gefragt. Hast Du die Möglichkeit deinen USB-Stick, der nicht automatisch gemountet werden kann, mal "sauber" reparieren zu lassen.
Nicht das es an dem Fehler welcher im Logfile angezeigt wird liegt, und er demnach nicht gemountet wird.
--- Code: ---Feb 21 15:59:15 (MLD) user.warn kernel: FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
--- End code ---
Gruß,
Pit
Christian:
Hallo,
Ich hatte ein paar Debug Ausgaben hinzugefügt und bin jetzt ein wenig schlauer .
Udevil startet mit errorcode 0 ... Geht also
Im nächsten Schritt wird errorlevel und PID abgefragt und da kommt kein PID zurück.
Da müssen wir also noch einmal schauen warum der Busybox "ps" Befehl noch nicht will.
thueringer01:
Hi,
aktuelles shd-iso. kein Bild, xorg wird nicht geladen
Cannot install package xorg-drivers.
--- Code: ---/var/log/sysinit
Searching for boot device: /
Boot device is: /dev/sda1
done
Install packages:
Installing alsa (1.0.25-7_3.13.2.35) to root...
Installing libasound2 (1.0.25-1) to root...
Installing btrfs (0.20-31) to root...
Installing dvb-remote (2014.02.12-11_3.13.2.35) to root...
Installing libftdi1 (0.20-1) to root...
Installing libusb-0.1-4 (0.1.12-1) to root...
Installing libportaudio2 (19-1) to root...
Installing libjack-jackd2-0 (1.9.9.5-1) to root...
Installing libstdc++6 (4.7.3-1) to root...
Installing libgcc1 (4.7.3-1) to root...
Installing liblircclient0 (0.9.0-1) to root...
Installing libx11-6 (1.5.0-1) to root...
Installing libxcb1 (1.8.1-1) to root...
Installing libxau6 (1.0.7-1) to root...
Installing libxdmcp6 (1.1.1-1) to root...
Installing dvb (2014.02.12-25_3.13.2.35) to root...
Installing eventlircd (2014.01.11-5_3.13.2.35) to root...
Installing irkeytable (0.8.9-4) to root...
Installing libudev1 (198-1) to root...
Installing install (0-25) to root...
Installing xfs (0-4) to root...
Package irkeytable (0.8.9-4) installed in root is up to date.
Package libasound2 (1.0.25-1) installed in root is up to date.
Installing libaudit1 (2.2.2-1) to root...
Installing libavcodec53 (0.8.9-1) to root...
Installing libavutil51 (0.8.9-1) to root...
Installing libvpx1 (1.1.0-1) to root...
Installing libvorbisenc2 (1.3.2-1) to root...
Installing libvorbis0a (1.3.2-1) to root...
Installing libogg0 (1.3.0-1) to root...
Installing libtheora0 (1.1.1-3) to root...
Installing libspeex1 (1.2-1) to root...
Installing libschroedinger-1.0-0 (1.0.11-1) to root...
Installing liborc-0.4-0 (0.4.17-1) to root...
Installing libgsm1 (1.0.13-1) to root...
Installing libva1 (1.0.15-1) to root...
Package libavutil51 (0.8.9-1) installed in root is up to date.
Installing libbz2-1.0 (1.0.6-1) to root...
Installing libcap2 (2.22-1) to root...
Installing libdrm2 (2.4.43-1) to root...
Installing libexpat1 (2.1.0-1) to root...
Installing libfontconfig1 (2.10.2-1) to root...
Installing libfreetype6 (2.4.11-1) to root...
Installing libfontenc1 (1.1.1-1) to root...
Package libfreetype6 (2.4.11-1) installed in root is up to date.
Package libftdi1 (0.20-1) installed in root is up to date.
Package libgcc1 (4.7.3-1) installed in root is up to date.
Installing libgcrypt11 (1.5.0-1) to root...
Installing libgpg-error0 (1.10-1) to root...
Installing libgdk-pixbuf2.0-0 (2.28.0-2) to root...
Installing libgl1-mesa-dri (9.1.7-3) to root...
Installing libllvm3.2 (3.2-1) to root...
Installing libglapi-mesa (9.1.7-1) to root...
Package libglapi-mesa (9.1.7-1) installed in root is up to date.
Package libgpg-error0 (1.10-1) installed in root is up to date.
Package libgsm1 (1.0.13-1) installed in root is up to date.
Installing libice6 (1.0.8-1) to root...
Installing libimlib2 (1.4.5-1) to root...
Installing libxext6 (1.3.1-1) to root...
Package libjack-jackd2-0 (1.9.9.5-1) installed in root is up to date.
Installing libjasper1 (1.900.1-1) to root...
Installing libjpeg-turbo8 (1.2.1-1) to root...
Installing libjbig0 (2.0-1) to root...
Package libjpeg-turbo8 (1.2.1-1) installed in root is up to date.
Package liblircclient0 (0.9.0-1) installed in root is up to date.
Package libllvm3.2 (3.2-1) installed in root is up to date.
Installing liblzma5 (5.1.1-1) to root...
Installing libmtdev1 (1.1.2-1) to root...
Installing libnetpbm10 (10.0-1) to root...
Package libogg0 (1.3.0-1) installed in root is up to date.
Package liborc-0.4-0 (0.4.17-1) installed in root is up to date.
Installing libpciaccess0 (0.13.1-1) to root...
Installing libpixman-1-0 (0.28.2-1) to root...
Installing libpng12-0 (1.2.49-1) to root...
Package libportaudio2 (19-1) installed in root is up to date.
Package libschroedinger-1.0-0 (1.0.11-1) installed in root is up to date.
Installing libsm6 (1.2.1-1) to root...
Package libspeex1 (1.2-1) installed in root is up to date.
Package libstdc++6 (4.7.3-1) installed in root is up to date.
Package libtheora0 (1.1.1-3) installed in root is up to date.
Installing libtiff5 (4.0.2-1) to root...
Package libudev1 (198-1) installed in root is up to date.
Package libusb-0.1-4 (0.1.12-1) installed in root is up to date.
Installing libutempter0 (1.1.5-1) to root...
Package libva1 (1.0.15-1) installed in root is up to date.
Installing libvdpau1 (0.4.1-1) to root...
Package libvorbis0a (1.3.2-1) installed in root is up to date.
Package libvorbisenc2 (1.3.2-1) installed in root is up to date.
Package libvpx1 (1.1.0-1) installed in root is up to date.
Installing libwmf0.2-7 (0.2.8.4-2) to root...
Package libx11-6 (1.5.0-1) installed in root is up to date.
Installing libx11-xcb1 (1.5.0-1) to root...
Package libxau6 (1.0.7-1) installed in root is up to date.
Installing libxaw7 (1.0.10-1) to root...
Installing libxmu6 (1.1.1-1) to root...
Installing libxt6 (1.1.3-1) to root...
Installing libxpm4 (3.5.10-1) to root...
Installing libxcb-dpms0 (1.8.1-1) to root...
Installing libxcb-icccm4 (0.3.9-1) to root...
Installing libxcb-screensaver0 (1.8.1-1) to root...
Package libxcb1 (1.8.1-1) installed in root is up to date.
Installing libxcomposite1 (0.4.3-1) to root...
Installing libxdamage1 (1.1.3-1) to root...
Package libxdmcp6 (1.1.1-1) installed in root is up to date.
Package libxext6 (1.3.1-1) installed in root is up to date.
Installing libxfixes3 (5.0-1) to root...
Installing libxfont1 (1.4.5-1) to root...
Installing libxft2 (2.3.1-1) to root...
Installing libxrender1 (0.9.7-1) to root...
Installing libxinerama1 (1.1.2-1) to root...
Installing libxkbfile1 (1.0.8-1) to root...
Package libxmu6 (1.1.1-1) installed in root is up to date.
Installing libxmuu1 (1.1.1-1) to root...
Package libxpm4 (3.5.10-1) installed in root is up to date.
Installing libxrandr2 (1.4.0-1) to root...
Package libxrender1 (0.9.7-1) installed in root is up to date.
Package libxt6 (1.1.3-1) installed in root is up to date.
Installing locales (0-3) to root...
Installing network (0-15_3.13.2.35) to root...
Installing vdr-plugin-opkg (0.1.0-15_2.1.4.50) to root...
Installing vdr (2.1.4.50-53) to root...
Installing vdr-plugin-setup (0.3.1-6_2.1.4.50) to root...
Installing vdr-plugin-softhddevice (2014.02.18-13_2.1.4.50) to root...
Installing xorg (1.13.3-22_3.13.2.35) to root...
Package vdr (2.1.4.50-53) installed in root is up to date.
Installing wakeup (1.1-6_3.13.2.35) to root...
Installing webserver (0-93) to root...
Package xfs (0-4) installed in root is up to date.
Installing xorg-autodetect (1.13.3-9) to root...
Package xorg (1.13.3-22_3.13.2.35) installed in root is up to date.
Configuring libc6.
Configuring libuuid1.
Configuring btrfs.
Configuring ldconfig.
Configuring libgcc1.
Configuring libstdc++6.
Configuring libjack-jackd2-0.
Configuring libbz2-1.0.
Configuring locales.
Configuring libxau6.
Configuring libxdmcp6.
Configuring libxcb1.
Configuring libx11-6.
Configuring libxext6.
Configuring libvdpau1.
Configuring libogg0.
Configuring libtheora0.
Configuring libusb-0.1-4.
Configuring libftdi1.
Configuring opkg.
Configuring libvorbis0a.
Configuring kernel.
Configuring libpcre3.
Configuring zlib1g.
Configuring libselinux1.
Configuring libffi6.
Configuring libglib2.0-0.
Configuring libgdk-pixbuf2.0-0.
Configuring libxinerama1.
Configuring libxcomposite1.
Configuring libxdamage1.
Configuring libxfixes3.
Configuring libxrender1.
Configuring libfreetype6.
Configuring libexpat1.
Configuring libfontconfig1.
Configuring libxft2.
Configuring libice6.
Configuring libsm6.
Configuring libxt6.
Configuring libxmu6.
Configuring libxpm4.
Configuring libxaw7.
Configuring libutempter0.
Configuring libtinfo5.
Configuring libxkbfile1.
Configuring libxmuu1.
Configuring libimlib2.
Configuring libudev1.
Configuring libgpg-error0.
Configuring libgcrypt11.
Configuring libpciaccess0.
Configuring libdrm2.
Configuring libpixman-1-0.
Configuring libfontenc1.
Configuring libxfont1.
Configuring libaudit1.
Configuring libxrandr2.
Configuring libnetpbm10.
Configuring libpng12-0.
Configuring libjpeg-turbo8.
Configuring libwmf0.2-7.
Configuring liblzma5.
Configuring libjbig0.
Configuring libtiff5.
Configuring libjasper1.
Configuring libllvm3.2.
Configuring libglapi-mesa.
Configuring libgl1-mesa-dri.
Configuring libmtdev1.
Configuring xorg.
Configuring busybox.
Configuring libblkid1.
Configuring libncursesw5.
Configuring base.
Configuring libgsm1.
Configuring irkeytable.
Configuring eventlircd.
Configuring libavutil51.
Configuring xorg-autodetect.
Configuring libxcb-dpms0.
Configuring libvorbisenc2.
Configuring init.
Configuring libva1.
Configuring libspeex1.
Configuring libxcb-screensaver0.
Configuring libvpx1.
Configuring liborc-0.4-0.
Configuring libschroedinger-1.0-0.
Configuring libavcodec53.
Configuring libasound2.
Configuring libportaudio2.
Configuring liblircclient0.
Configuring dvb-remote.
Configuring libcap2.
Configuring vdr.
Configuring wakeup.
Configuring libattr1.
Configuring libacl1.
Configuring webserver.
Configuring xfs.
Configuring install.
Configuring network.
Configuring udev.
Configuring alsa.
Configuring libxcb-icccm4.
Configuring psplash.
Configuring vdr-plugin-setup.
Configuring libx11-xcb1.
Configuring vdr-plugin-softhddevice.
Configuring vdr-plugin-opkg.
Configuring dvb.
done
Copy initramfs to tmpfs:
done
Import filesystems:
Turn on DMA:
Checking:
done
Mounting:
done
Setting up logging: level 1
Setting up netware:
done
btrfs:
locales:
Setting LANG:
Setting timezone:
done
Load keymap: de-latin1
done
wakeup:
Initialisation wakeup:
done
vdr:
xorg:
xorg-autodetect:
lirc:
eventlircd:
softhddevice:
opkg:
alsa:
network:
Starting eventlircd
done
Init networking
Starting DHCP-client
done
done
install selected Xorg driver Package:
xorg-drivers: /
xorg-drivers: -
xorg-drivers:
xorg-drivers: |
xorg-drivers: /
xorg-drivers: -
xorg-drivers:
xorg-drivers: |
xorg-drivers: /
xorg-drivers: -
xorg-drivers:
Installing xorg-drivers (1.13.3-1_3.13.2.35) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/base/xorg-drivers_1.13.3-1_3.13.2.35.opk.
xorg-drivers: |
xorg-drivers: /
Installing libdrm-nouveau2 (2.4.43-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libdrm-nouveau2_2.4.43-1.opk.
Installing libdrm-radeon1 (2.4.43-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libdrm-radeon1_2.4.43-1.opk.
xorg-drivers: -
Installing libdrm-intel1 (2.4.43-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libdrm-intel1_2.4.43-1.opk.
xorg-drivers:
Installing libgl1-mesa-glx (9.1.7-2) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libgl1-mesa-glx_9.1.7-2.opk.
Installing libxcb-glx0 (1.8.1-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libxcb-glx0_1.8.1-1.opk.
xorg-drivers: |
Installing libxcb-dri2-0 (1.8.1-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libxcb-dri2-0_1.8.1-1.opk.
Installing libxxf86vm1 (1.1.2-1) to root...
Downloading http://www.minidvblinux.de/download/4.0.0/files/libs/libxxf86vm1_1.1.2-1.opk.
xorg-drivers: /
Configuring libxcb-dri2-0.
Configuring libxxf86vm1.
Configuring libdrm-intel1.
Configuring libxcb-glx0.
Configuring libdrm-nouveau2.
Configuring libgl1-mesa-glx.
Configuring libdrm-radeon1.
Collected errors:
* check_data_file_clashes: Package xorg-drivers wants to install file /usr/lib/i386-linux-gnu/dri/swrast_dri.so
But that file is already provided by package * xorg
* opkg_install_cmd: Cannot install package xorg-drivers.
xorg-drivers: -
failed
Starting xorg
done
Init sound card:
Init sound settings:
Found hardware: "HDA-Intel" "Realtek ALC887-VD" "HDA:10ec0887,1458a002,00100302" "0x1458" "0xa002"
Hardware is initialized using a generic method
done
Starting VDR
done
irexec:
irxevent:
vdr-plugin-opkg:
setup:
webserver:
Starting webserver:
done
--- End code ---
Grüße
gkd-berlin:
Hallo Pit,
ich habe mich auch schon gefragt, wo diese Fehlermeldungen herkommen.
Das geschieht nur in der MLD4. Auch in der MLD4-RPI habe ich diese Meldungen von der SD-KArte bekommen.
Seit der Version MLD-4..ff_hd vom 19.2 wird meine Testplatte nur noch mit 18 GB angezeigt. Davor waren es jahrelang 20 GB.
Habt ihr da etwas geändert?
In WinXP werden die Karte und der Stick in diskmgmt.msc als Fehlerfrei erkannt.
Formatieren unter XP hat keine Abhilfe gebracht. Deshalb habe ich Stick und SD-Karte mit gparted in raspbian auf dem RPI neu partitioniert und formatiert. Zunächst kamen in der MLD4 keine Fehler. Den Stick hatte ich erst vor 3 Tagen neu eingerichtet.
Heute er wieder da. ?
Die Zeile, daß FAT32 erkannt wurde, habe ich heute nur einmal gesehen. Weitere Versuche blieben immer ohne diese Zeile.
Der Stick wurde heute noch einmal neu eingerichtet. Mal sehen, wann wieder Fehler gemeldet werden.
Der Stick funktioniert in meinem Produktivsystem (3.0.2 vom 1.12.11) ohne jede Fehlermeldung. udevil gab es da noch nicht. Der Stick wird mit seinem Label in /media automatisch gemountet.
Gruß Gerhard
Christian:
@gdk-berlin
du darfst noch mal ;) aktuelle version habe ich ersetzt
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version