Archiv > Development
Test MLD-4 ISO
gkd-berlin:
Hallo,
Test: ff-hd-2014.01.21-33.iso
so mag ich das. Ich konnte die Addons: mc, samba, ssh, epgsearch, extrecmenu und streamdev-server problemlos nachinstallieren.
Auch snapshot funktioniert tadellos.
Bitte weiter so, und her mit den nächsten Addons.
Gruß Gerhard
thueringer01:
Hallo,
danke für das dfatmo, leider fehlt dazu das usb-addon. Dann sollte das laufen. Hatten wir schon bei der 3.0.3.
--- Code: ---user.emerg vdr: [970] DFAtmo: output driver error: could not open serial port device '/dev/ttyUSB0': No such file or directory
--- End code ---
Wenn wir schon bei "Wünsch dir was" sind. Gern würde ich auch dass xorg-multiscreen und das graphtft mit meinem 7" testen.
Danke schon mal
thueringer01:
Die Show boot menu time: lässt sich nicht ändern. Es Kommt oben im Bild:
--- Code: ---sed: can't create temp file '/boot/isolinux/style.cfgzqtQky': No such file or directory
--- End code ---
und die Zeit bleibt bei laaaangen 5 sec.
MegaX:
Hi thueringer
das usb Package ist nun mit im git. Claus braucht es nur noch mit im nightbuild aufnehmen dann sollte es morgen online sein.
MegaX
clausmuus:
--- Quote from: thueringer01 on January 16, 2014, 18:19:13 ---Hi Claus,
ein paar logs ;)
/var/log/messages
--- Code: ---Jan 16 17:46:04 (MLD) syslog.info syslogd started: BusyBox v1.22.0
Jan 16 17:46:07 (MLD) user.err kernel: lirc_serial: port existence test failed, cannot continue
Jan 16 17:46:07 (MLD) user.info kernel: platform lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
Jan 16 17:46:10 (MLD) daemon.notice lircd-0.9.0[691]: lircd(default) ready, using /var/run/lirc/lircd
Jan 16 17:46:13 (MLD) user.warn kernel: NVRM: Your system is not currently configured to drive a VGA console
Jan 16 17:46:13 (MLD) user.warn kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Jan 16 17:46:13 (MLD) user.warn kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
Jan 16 17:46:13 (MLD) user.warn kernel: NVRM: drivers including, but not limited to, vesafb, may result in
Jan 16 17:46:13 (MLD) user.warn kernel: NVRM: corruption and stability problems, and is not supported.
Jan 16 17:46:15 (MLD) daemon.notice lircd-0.9.0[691]: accepted new client on /var/run/lirc/lircd
Jan 16 17:46:16 (MLD) user.warn kernel: hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Jan 16 17:46:18 (MLD) user.info kernel: r8169 0000:04:00.0 eth0: link down
Jan 16 17:46:18 (MLD) user.info kernel: r8169 0000:04:00.0 eth0: link down
Jan 16 17:46:18 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 16 17:46:20 (MLD) user.info kernel: r8169 0000:04:00.0 eth0: link up
Jan 16 17:46:20 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 16 17:46:24 (MLD) auth.info login[1239]: root login on 'tty1'
Jan 16 17:46:24 (MLD) auth.info login[1241]: root login on 'tty2'
Jan 16 17:46:24 (MLD) auth.info login[1243]: root login on 'tty3'
Jan 16 17:46:24 (MLD) auth.info login[1245]: root login on 'tty4'
Jan 16 17:49:35 (MLD) user.err vdr: [softhddev] invalid PES video packet
Jan 16 17:49:35 (MLD) user.err vdr: [softhddev] 3 invalid PES video packet(s)
--- End code ---
sorry wird doch geladen, lsmod sagt:
--- Code: ---lirc_dev 6371 2 lirc_serial,lirc_igorplugusb
--- End code ---
muß dann selbst mal mit irw usw probieren. Ich hab jetzt nur dvb-remote drauf, so wie auch bei der 3.0.3.
xorg-nvidia ist hier installiert:
--- Code: ---MLD> lspci -m
00:00.0 "Class 0600" "8086" "0100" "1458" "5000"
00:01.0 "Class 0604" "8086" "0101" "1458" "5000"
00:16.0 "Class 0780" "8086" "1c3a" "1458" "1c3a"
00:1a.0 "Class 0c03" "8086" "1c2d" "1458" "5006"
00:1b.0 "Class 0403" "8086" "1c20" "1458" "a002"
00:1c.0 "Class 0604" "8086" "1c10" "1458" "5001"
00:1c.2 "Class 0604" "8086" "1c14" "1458" "5001"
00:1c.4 "Class 0604" "8086" "1c18" "1458" "5001"
00:1c.5 "Class 0604" "8086" "1c1a" "1458" "5001"
00:1d.0 "Class 0c03" "8086" "1c26" "1458" "5006"
00:1f.0 "Class 0601" "8086" "1c5c" "1458" "5001"
00:1f.2 "Class 0101" "8086" "1c00" "1458" "b005"
00:1f.3 "Class 0c05" "8086" "1c22" "1458" "5001"
00:1f.5 "Class 0101" "8086" "1c08" "1458" "b002"
01:00.0 "Class 0300" "10de" "104a" "1043" "840d"
01:00.1 "Class 0403" "10de" "0e08" "1043" "840d"
03:00.0 "Class 0c03" "1106" "3483" "1458" "5007"
04:00.0 "Class 0200" "10ec" "8168" "1458" "e000"
05:00.0 "Class 0480" "dd01" "0003" "dd01" "0021"
MLD>
--- End code ---
und dann noch mit dem verdächtigen 1GB-Stick (win7 und netbootin)
--- Code: ---MLD> fdisk -l
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
64 heads, 32 sectors/track, 1430799 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 2 9539 9766912 83 Linux
/dev/sda2 9540 1430799 1455370240 83 Linux
Disk /dev/sdc: 1015 MB, 1015021568 bytes
32 heads, 61 sectors/track, 1015 cylinders
Units = cylinders of 1952 * 512 = 999424 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 ? 1651315 1777688 123339962 f4 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(793, 22, 13) logical=(1651314, 29, 56)
Partition 1 has different physical/logical endings:
phys=(870, 235, 61) logical=(1777687, 27, 5)
Partition 1 does not end on cylinder boundary
/dev/sdc2 ? 193747 363948 166116794 10 Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(205, 7, 0) logical=(193746, 8, 58)
Partition 2 has different physical/logical endings:
phys=(870, 235, 50) logical=(363947, 29, 12)
Partition 2 does not end on cylinder boundary
/dev/sdc3 ? 115576 115576 5 74 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(367, 66, 47) logical=(115575, 17, 6)
Partition 3 has different physical/logical endings:
phys=(370, 32, 37) logical=(115575, 17, 15)
Partition 3 does not end on cylinder boundary
--- End code ---
Grüße
--- End quote ---
Hi thueringer01,
teste bitte mal ob die xorg Treibererkennung nun besser funktioniert.
Claus
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version