Archiv > Development

Skystar S2 Unter Mld?

<< < (6/15) > >>

oelhahn:
Ich bin einen kleinen Schritt weiter, was die SkyStar S2 angeht, die ihr mir freundlicherweise in den MLD eingebaut habt.
Und zwar:

Wenn ich unter der aktuellen 3.0.3 Server (08.09) Wirbelscan starte, kommt die Meldung

wirbelscan version 0.0.7
Running on VDR 2.1.1(with internal Plugin support. :-))
No DVB-S2 device available - trying fallback to DVB-S
No device available - exiting!
No DVB-S2 device available - trying fallback to DVB-S
No device available - exiting!

Möglicherweise hilft uns das weiter? :unsure:

EDIT:

Muss das Modul cx24120 eventuell mit irgendwelchen Optionen starten?
Kann ich die gegebenenfalls beim YaVDR finden und wenn ja, wo?

oelhahn:
Ergänzend zu oben noch ein "Screenshot" vom Wirbelscan-Plugin:

 

Christian:

--- Quote --- Ergänzend zu oben noch ein "Screenshot" vom Wirbelscan-Plugin:
--- End quote ---
Kannst du vll noch einmal ein frisches messages und sysinit Log Posten?
Unter:
/var/log

Ggf kannst du auch dein vdr stoppen über:

"stop vdr"

Und auf der Konsole das wscan ausführen.

Mich wundert es nur das er sagt kein device ?!

oelhahn:

--- Quote ---
--- Quote --- Ergänzend zu oben noch ein "Screenshot" vom Wirbelscan-Plugin:
--- End quote ---
Kannst du vll noch einmal ein frisches messages und sysinit Log Posten?
Unter:
/var/log

Ggf kannst du auch dein vdr stoppen über:

"stop vdr"

Und auf der Konsole das wscan ausführen.

Mich wundert es nur das er sagt kein device ?!
--- End quote ---

Wenn ich in die /var/log/messages sehe, sieht es doch für mich so aus, als würden die beiden SAT-Karten ordentlich erkannt, oder täusche ich mich da?

W-Scan sieht so aus:

--- Code: ---MLD> w_scan -fs -sS19E2 -c DE
w_scan version 20130331 (compiled for DVB API 5.9)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
        /dev/dvb/adapter0/frontend0 -> SATELLITE "Conexant CX24120/CX24118": very good :-))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'Conexant CX24120/CX24118' supports
INVERSION_AUTO
DVB-SMLD> w_scan -fs -sS19E2 -c DE
w_scan version 20130331 (compiled for DVB API 5.9)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
        /dev/dvb/adapter0/frontend0 -> SATELLITE "Conexant CX24120/CX24118": very good :-))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'Conexant CX24120/CX24118' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
trying 'S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK'
(time: 00:00)
trying 'S  f = 10744 kHz H SR = 22000  5/6 0,35  QPSK'
(time: 00:03)
trying 'S  f = 10759 kHz V SR = 22000  5/6 0,35  QPSK'
(time: 00:06)
trying 'S2 f = 10773 kHz H SR = 22000  3/4 0,35  8PSK'
(time: 00:08)
trying 'S  f = 10788 kHz V SR = 22000  5/6 0,35  QPSK'
(time: 00:11)
trying 'S2 f = 10818 kHz V SR = 22000  2/3 0,35  8PSK'
(time: 00:14)
trying 'S2 f = 10832 kHz H SR = 22000  2/3 0,35  8PSK'
(time: 00:17)

DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
trying 'S2 f = 10729 kHz V SR = 22000  2/3 0,35  8PSK'
(time: 00:00)
trying 'S  f = 10744 kHz H SR = 22000  5/6 0,35  QPSK'
(time: 00:03)
trying 'S  f = 10759 kHz V SR = 22000  5/6 0,35  QPSK'
(time: 00:06)
trying 'S2 f = 10773 kHz H SR = 22000  3/4 0,35  8PSK'
(time: 00:08)
trying 'S  f = 10788 kHz V SR = 22000  5/6 0,35  QPSK'
(time: 00:11)
trying 'S2 f = 10818 kHz V SR = 22000  2/3 0,35  8PSK'
(time: 00:14)
trying 'S2 f = 10832 kHz H SR = 22000  2/3 0,35  8PSK'
(time: 00:17)
...

ERROR: Sorry - i couldn't get any working frequency/transponder
 Nothing to scan!!
MLD>

--- End code ---

Was mich sehr verwirrt, da doch zumindest ARD HD, ZDF HD und 12 weitere empfangen werden???  :blink:


--- Code: ---/var/log/messages

Sep 14 06:10:50 (MLD) syslog.info syslogd started: BusyBox v1.21.1
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[261]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[272]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[283]: uid/gid/perm /var/spool/apm.mnt/install 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[294]: uid/gid/perm /var/spool/apm.mnt/dbus 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[305]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[316]: uid/gid/perm /var/spool/apm.mnt/python 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[327]: uid/gid/perm /var/spool/apm.mnt/python-dbus 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[338]: uid/gid/perm /var/spool/apm.mnt/python-avahi 0/0/0777, 0/0/0775
Sep 14 06:10:50 (MLD) user.warn kernel: aufs test_add:294:mount[349]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[360]: uid/gid/perm /var/spool/apm.mnt/avahi 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[371]: uid/gid/perm /var/spool/apm.mnt/avahi-linker 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[382]: uid/gid/perm /var/spool/apm.mnt/autofs 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[393]: uid/gid/perm /var/spool/apm.mnt/nfs-server 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[404]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[415]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[426]: uid/gid/perm /var/spool/apm.mnt/lib-curl 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[437]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[448]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[459]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[470]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[481]: uid/gid/perm /var/spool/apm.mnt/dummydevice 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[492]: uid/gid/perm /var/spool/apm.mnt/skincurses 0/0/0777, 0/0/0775
Sep 14 06:10:51 (MLD) user.warn kernel: aufs test_add:294:mount[503]: uid/gid/perm /var/spool/apm.mnt/streamdev-server 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[514]: uid/gid/perm /var/spool/apm.mnt/svdrposd 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[525]: uid/gid/perm /var/spool/apm.mnt/backup 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[536]: uid/gid/perm /var/spool/apm.mnt/mc 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[547]: uid/gid/perm /var/spool/apm.mnt/usb 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[558]: uid/gid/perm /var/spool/apm.mnt/perl 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[569]: uid/gid/perm /var/spool/apm.mnt/vdradmin-am 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[580]: uid/gid/perm /var/spool/apm.mnt/lib-x 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[591]: uid/gid/perm /var/spool/apm.mnt/xorg 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[602]: uid/gid/perm /var/spool/apm.mnt/lib-pango 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[613]: uid/gid/perm /var/spool/apm.mnt/xorg-nvidia 0/0/0777, 0/0/0775
Sep 14 06:10:52 (MLD) user.warn kernel: aufs test_add:294:mount[624]: uid/gid/perm /var/spool/apm.mnt/wirbelscan 0/0/0777, 0/0/0775
Sep 14 06:10:53 (MLD) user.warn kernel: aufs test_add:294:mount[635]: uid/gid/perm /var/spool/apm.mnt/vnsiserver 0/0/0777, 0/0/0775
Sep 14 06:10:53 (MLD) user.warn kernel: aufs test_add:294:mount[646]: uid/gid/perm /var/spool/apm.mnt/wscan 0/0/0777, 0/0/0775
Sep 14 06:10:54 (MLD) daemon.info kernel: udevd[665]: starting version 175
Sep 14 06:10:54 (MLD) user.info kernel: Linux agpgart interface v0.103
Sep 14 08:10:54 (MLD) daemon.err ata_id[798]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument
Sep 14 06:10:54 (MLD) user.warn kernel: nvidia: module license 'NVIDIA' taints kernel.
Sep 14 06:10:54 (MLD) user.warn kernel: Disabling lock debugging due to kernel taint
Sep 14 06:10:54 (MLD) user.info kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Sep 14 06:10:54 (MLD) user.warn kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module  319.32  Wed Jun 19 15:20:44 PDT 2013
Sep 14 06:10:54 (MLD) user.info kernel: pps_core: LinuxPPS API ver. 1 registered
Sep 14 06:10:54 (MLD) user.info kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Sep 14 06:10:54 (MLD) user.info kernel: PTP clock support registered
Sep 14 06:10:55 (MLD) user.info kernel: tg3.c:v3.128 (December 03, 2012)
Sep 14 06:10:55 (MLD) user.err kernel: WARNING: You are using an experimental version of the media stack.
Sep 14 06:10:55 (MLD) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Sep 14 06:10:55 (MLD) user.err kernel: enough quality for its usage in production.
Sep 14 06:10:55 (MLD) user.err kernel: Use it with care.
Sep 14 06:10:55 (MLD) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Sep 14 06:10:55 (MLD) user.err kernel: dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
Sep 14 06:10:55 (MLD) user.err kernel: 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
Sep 14 06:10:55 (MLD) user.err kernel: 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
Sep 14 06:10:55 (MLD) user.err kernel: experimental: 7631b6e10c42669d290362c13fee7da3be35a8da experimental: Basic support for parallel build ('make -jN')
Sep 14 06:10:55 (MLD) user.err kernel: ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
Sep 14 06:10:55 (MLD) user.err kernel: v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(B)/III digital TV receiver chip loaded successfully
Sep 14 06:10:55 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:11:25:f7:f0:23
Sep 14 06:10:55 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
Sep 14 06:10:55 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Sep 14 06:10:55 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
Sep 14 06:10:55 (MLD) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 14 06:10:55 (MLD) user.info kernel: flexcop-pci: card revision 2
Sep 14 06:10:55 (MLD) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:49:4a
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Driver version: 'SVT - 0.0.4a 03.04.2012'
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Demod CX24120 rev. 0x07 detected.
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner ATTACHED.
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: ISL6421 successfully attached.
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: found 'Conexant CX24120/CX24118' .
Sep 14 06:10:55 (MLD) user.info kernel: b2c2_flexcop_pci 0000:0a:0a.0: DVB: registering adapter 0 frontend 0 (Conexant CX24120/CX24118)...
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Sep 14 06:10:55 (MLD) user.info kernel: flexcop-pci: will use the HW PID filter.
Sep 14 06:10:55 (MLD) user.info kernel: flexcop-pci: card revision 2
Sep 14 06:10:55 (MLD) user.info kernel: DVB: registering new adapter (FlexCop Digital TV device)
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: MAC address = 00:08:c9:e0:87:58
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Driver version: 'SVT - 0.0.4a 03.04.2012'
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Demod CX24120 rev. 0x07 detected.
Sep 14 06:10:55 (MLD) user.info kernel: CX24120: cx24120_attach: -> Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner ATTACHED.
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: ISL6421 successfully attached.
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: found 'Conexant CX24120/CX24118' .
Sep 14 06:10:55 (MLD) user.info kernel: b2c2_flexcop_pci 0000:0a:0c.0: DVB: registering adapter 1 frontend 0 (Conexant CX24120/CX24118)...
Sep 14 06:10:55 (MLD) user.info kernel: b2c2-flexcop: initialization of 'Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Sep 14 06:10:57 (MLD) user.notice kernel: XFS (sdc2): Mounting Filesystem
Sep 14 06:10:57 (MLD) user.notice kernel: XFS (sdc2): Starting recovery (logdev: internal)
Sep 14 06:10:58 (MLD) user.notice kernel: XFS (sdc2): Ending recovery (logdev: internal)
Sep 14 06:11:03 (MLD) user.warn kernel: NVRM: Your system is not currently configured to drive a VGA console
Sep 14 06:11:03 (MLD) user.warn kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
Sep 14 06:11:03 (MLD) user.warn kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
Sep 14 06:11:03 (MLD) user.warn kernel: NVRM: drivers including, but not limited to, vesafb, may result in
Sep 14 06:11:03 (MLD) user.warn kernel: NVRM: corruption and stability problems, and is not supported.
Sep 14 06:11:08 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Found user 'avahi' (UID 108) and group 'avahi' (GID 110).
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Successfully dropped root privileges.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: avahi-daemon 0.6.31 starting up.
Sep 14 08:11:09 (MLD) daemon.warn avahi-daemon[1661]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-music.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-photo.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-recordings.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-svdrp.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-video-movies.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-video-series.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Loading service file /etc/avahi/services/vdr-video.service.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.99.201.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: New relevant interface eth0.IPv4 for mDNS.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Network interface enumeration completed.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Registering new address record for 192.168.99.201 on eth0.IPv4.
Sep 14 08:11:09 (MLD) daemon.info avahi-daemon[1661]: Registering HINFO record with values 'I686'/'LINUX'.
Sep 14 06:11:10 (MLD) user.warn kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Sep 14 06:11:10 (MLD) user.info kernel: NFSD: starting 90-second grace period (net c1665440)
Sep 14 08:11:10 (MLD) daemon.notice rpc.mountd[1712]: Version 1.2.6 starting
Sep 14 08:11:10 (MLD) daemon.info avahi-daemon[1661]: Server startup complete. Host name is MLDSERVER.local. Local service cookie is 1689998274.
Sep 14 08:11:10 (MLD) daemon.info avahi-dnsconfd[1825]: Successfully connected to Avahi daemon.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Videos on MLDSERVER" (/etc/avahi/services/vdr-video.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Series on MLDSERVER" (/etc/avahi/services/vdr-video-series.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Movies on MLDSERVER" (/etc/avahi/services/vdr-video-movies.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "SVDRP on MLDSERVER" (/etc/avahi/services/vdr-svdrp.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Recordings on MLDSERVER" (/etc/avahi/services/vdr-recordings.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Pictures on MLDSERVER" (/etc/avahi/services/vdr-photo.service) successfully established.
Sep 14 08:11:11 (MLD) daemon.info avahi-daemon[1661]: Service "Music on MLDSERVER" (/etc/avahi/services/vdr-music.service) successfully established.
Sep 14 06:11:11 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: Link is up at 1000 Mbps, full duplex
Sep 14 06:11:11 (MLD) user.info kernel: tg3 0000:0a:0b.0 eth0: Flow control is on for TX and on for RX
Sep 14 06:11:11 (MLD) user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sep 14 08:11:12 (MLD) daemon.info avahi-daemon[1661]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::211:25ff:fef7:f023.
Sep 14 08:11:12 (MLD) daemon.info avahi-daemon[1661]: New relevant interface eth0.IPv6 for mDNS.
Sep 14 08:11:12 (MLD) daemon.info avahi-daemon[1661]: Registering new address record for fe80::211:25ff:fef7:f023 on eth0.*.
Sep 14 06:11:23 (MLD) daemon.info init: reloading /etc/inittab
Sep 14 06:11:23 (MLD) daemon.info init: starting pid 3664, tty '/dev/tty1': '/bin/login -f root'
Sep 14 08:11:23 (MLD) auth.info login[3664]: root login on 'tty1'
Sep 14 06:11:23 (MLD) daemon.info init: starting pid 3666, tty '/dev/tty2': '/bin/login -f root'
Sep 14 08:11:23 (MLD) auth.info login[3666]: root login on 'tty2'
Sep 14 06:11:23 (MLD) daemon.info init: starting pid 3667, tty '/dev/tty3': '/bin/login -f root'
Sep 14 06:11:23 (MLD) daemon.info init: starting pid 3670, tty '/dev/tty4': '/bin/login -f root'
Sep 14 08:11:23 (MLD) auth.info login[3670]: root login on 'tty4'
Sep 14 08:11:23 (MLD) auth.info login[3667]: root login on 'tty3'
Sep 14 06:33:01 (MLD) daemon.info init: reloading /etc/inittab
Sep 14 08:35:05 (MLD) user.err vdr: [12284] ERROR: streamdev-server: couldn't send data: Bad file descriptor



/var/log/sysinit

VDR exits at Sa Sep 14 08:39:21 CEST 2013
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L

--- End code ---

clausmuus:
Was Du noch testen kannst ist, wie sich das System verhält, wenn Du nur eine Sat Karte einbaust.
Ich tippe aber eher da drauf, dass beim Transponder Umschalten irgendwas schief geht. Nun verwende ich zwar auch Unicable, kenne mich damit aber nur rudimentär aus. Ich weiß also nicht ob man da irgend was verkonfigurieren kann, weshalb das nur noch teilweise geht.
Noch ein paar Ideen (die Du eventuell schon geschrieben hast):
- Was passiert, wenn Du die ersten 14 Kanäle aus der Kanalliste löscht?
- Sind die ersten 14 Kanäle alles HD Kanäle, und ab 15 nur noch SD?
- Wie verhalten sich andere Kanallisten. Ist bei denen auch bei Kanal 15 Schluss?

Claus

Navigation

[0] Message Index

[#] Next page

[*] Previous page