Archiv > General
Mystique Satx-s2 Sky Xpress Dual
MegaX:
So heute nen neuen stick mit geändertem init.d script und es funktioniert das er den Treiber automatisch lädt.
Es gibt aber ein Problem wenn ich den VDR neu starte dann läd er die Treiber nicht mehr richtig. Das log reiche ich später noch nach da ich gerade nicht an den HTPC ran darf (Frau hat die Macht :D )
MegaX
kappa__2:
ok. After:
modprobe cx23885
and restarting vdr, still no picture.
here are the logs:
--- Code: ---
/var/log/messages
Aug 28 20:33:32 (none) syslog.info syslogd started: BusyBox v1.19.4
Aug 28 20:33:32 (none) user.warn kernel: aufs test_add:261:mount[2606]: uid/gid/perm /var/spool/apm.mnt/config 0/0/0777, 0/0/0775
Aug 28 20:33:32 (none) user.warn kernel: aufs test_add:261:mount[2620]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/0775
Aug 28 20:33:32 (none) user.warn kernel: aufs test_add:261:mount[2633]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/0775
Aug 28 20:33:32 (none) user.warn kernel: aufs test_add:261:mount[2646]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/0775
Aug 28 20:33:32 (none) user.warn kernel: aufs test_add:261:mount[2659]: uid/gid/perm /var/spool/apm.mnt/nfs-server 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2672]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2684]: uid/gid/perm /var/spool/apm.mnt/ssh 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2698]: uid/gid/perm /var/spool/apm.mnt/lib-curl 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2715]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2732]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2749]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2766]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2783]: uid/gid/perm /var/spool/apm.mnt/dummydevice 0/0/0777, 0/0/0775
Aug 28 20:33:33 (none) user.warn kernel: aufs test_add:261:mount[2799]: uid/gid/perm /var/spool/apm.mnt/skincurses 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2817]: uid/gid/perm /var/spool/apm.mnt/streamdev-server 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2834]: uid/gid/perm /var/spool/apm.mnt/svdrposd 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2851]: uid/gid/perm /var/spool/apm.mnt/dvb-usb 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2868]: uid/gid/perm /var/spool/apm.mnt/dvb-satx 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2885]: uid/gid/perm /var/spool/apm.mnt/vompserver 0/0/0777, 0/0/0775
Aug 28 20:33:34 (none) user.warn kernel: aufs test_add:261:mount[2902]: uid/gid/perm /var/spool/apm.mnt/mc 0/0/0777, 0/0/0775
Aug 28 20:33:36 (none) user.notice kernel: XFS (hda2): Mounting Filesystem
Aug 28 20:33:37 (none) user.info kernel: XFS (hda2): Ending clean mount
Aug 28 21:33:45 (none) daemon.err nmbd[3598]: [2012/08/28 21:33:45.861599, 0] nmbd/nmbd_subnetdb.c:249(create_subnets)
Aug 28 21:33:45 (none) daemon.err nmbd[3598]: create_subnets: No local IPv4 non-loopback interfaces !
Aug 28 21:33:45 (none) daemon.err nmbd[3598]: [2012/08/28 21:33:45.862264, 0] nmbd/nmbd_subnetdb.c:250(create_subnets)
Aug 28 21:33:45 (none) daemon.err nmbd[3598]: create_subnets: Waiting for an interface to appear ...
Aug 28 21:33:46 (none) daemon.err smbd[3639]: [2012/08/28 21:33:46.542321, 0] smbd/server.c:501(smbd_open_one_socket)
Aug 28 21:33:46 (none) daemon.err smbd[3639]: smbd_open_once_socket: open_socket_in: Address already in use
Aug 28 21:33:46 (none) daemon.err smbd[3639]: [2012/08/28 21:33:46.545894, 0] smbd/server.c:501(smbd_open_one_socket)
Aug 28 21:33:46 (none) daemon.err smbd[3639]: smbd_open_once_socket: open_socket_in: Address already in use
Aug 28 20:33:47 (none) user.info kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 28 20:33:47 (none) user.info kernel: r8169 0000:01:00.0: eth0: RTL8102e at 0xf8010000, 00:03:0d:b4:65:c7, XID 14a00000 IRQ 16
Aug 28 20:33:49 (none) user.info kernel: r8169 0000:01:00.0: eth0: link down
Aug 28 20:33:49 (none) user.info kernel: r8169 0000:01:00.0: eth0: link down
Aug 28 20:33:49 (none) user.info kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 28 20:33:50 (none) user.info kernel: RPC: Registered named UNIX socket transport module.
Aug 28 20:33:50 (none) user.info kernel: RPC: Registered udp transport module.
Aug 28 20:33:50 (none) user.info kernel: RPC: Registered tcp transport module.
Aug 28 20:33:50 (none) user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Aug 28 20:33:50 (none) user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 28 21:33:50 (none) daemon.notice rpc.mountd[4190]: Version 1.2.4 starting
Aug 28 20:33:50 (none) user.info kernel: r8169 0000:01:00.0: eth0: link up
Aug 28 20:33:50 (none) user.info kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 28 20:34:01 (none) user.debug kernel: eth0: no IPv6 routers present
Aug 28 20:34:03 (none) user.info kernel: bootsplash: status on console 0 changed to on
Aug 28 21:34:03 (none) auth.info login[5577]: root login on 'tty1'
Aug 28 21:34:03 (none) auth.info login[5578]: root login on 'tty2'
Aug 28 21:34:03 (none) auth.info login[5584]: root login on 'tty3'
Aug 28 21:34:03 (none) auth.info login[5591]: root login on 'tty4'
Aug 28 21:34:13 (none) daemon.err nmbd[3598]: [2012/08/28 21:34:13.968905, 0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Aug 28 21:34:13 (none) daemon.err nmbd[3598]: *****
Aug 28 21:34:13 (none) daemon.err nmbd[3598]:
Aug 28 21:34:13 (none) daemon.err nmbd[3598]: Samba name server TVSERVER is now a local master browser for workgroup on subnet 192.168.1.200
Aug 28 21:34:13 (none) daemon.err nmbd[3598]:
Aug 28 21:34:13 (none) daemon.err nmbd[3598]: *****
Aug 28 20:34:33 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Aug 28 20:34:33 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Aug 28 20:34:33 (none) user.err kernel: enough quality for its usage in production.
Aug 28 20:34:33 (none) user.err kernel: Use it with care.
Aug 28 20:34:33 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Aug 28 20:34:33 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Aug 28 20:34:33 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Aug 28 20:34:33 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Aug 28 20:34:33 (none) user.info kernel: Linux video capture interface: v2.00
Aug 28 20:34:33 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Aug 28 20:34:33 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Aug 28 20:34:33 (none) user.err kernel: enough quality for its usage in production.
Aug 28 20:34:33 (none) user.err kernel: Use it with care.
Aug 28 20:34:33 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Aug 28 20:34:33 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Aug 28 20:34:33 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Aug 28 20:34:33 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Aug 28 20:34:33 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Aug 28 20:34:33 (none) user.err kernel: As the driver is backported to an older kernel, it doesn't offer
Aug 28 20:34:33 (none) user.err kernel: enough quality for its usage in production.
Aug 28 20:34:33 (none) user.err kernel: Use it with care.
Aug 28 20:34:33 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Aug 28 20:34:33 (none) user.err kernel: da2cd767f537082be0a02d83f87e0da4270e25b2 [media] ttpci: add support for Omicom S2 PCI
Aug 28 20:34:33 (none) user.err kernel: 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef [media] staging: media: Remove easycap driver
Aug 28 20:34:33 (none) user.err kernel: 9cb2173e6ea8f2948bd1367c93083a2500fcf08f [media] media: Add stk1160 new driver (easycap replacement)
Aug 28 20:34:33 (none) user.info kernel: cx23885 driver version 0.0.3 loaded
--- End code ---
--- Code: ---/var/log/sysinit
Tue Aug 28 20:33:29 UTC 2012
Copy initramfs to tmpfs: done
Preparing root as aufs: done
Import system device: /dev/hda1
Turn on DMA:
done
Checking:
done
Mounting:
done
Mounting read-write system directory:
done
Setting up logging: level 1
done
Setting up netware:
done
Importing addon: config
done
Importing addon: locales
done
Importing addon: dvb
done
Importing addon: network
done
Importing addon: nfs-server
done
Importing addon: webserver
done
Importing addon: ssh
done
Importing addon: lib-curl
done
Importing addon: samba
done
Importing addon: vdr
done
Importing addon: addons
done
Importing addon: setup
done
Importing addon: dummydevice
done
Importing addon: skincurses
done
Importing addon: streamdev-server
done
Importing addon: svdrposd
done
Importing addon: dvb-usb
done
Importing addon: dvb-satx
done
Importing addon: vompserver
done
Importing addon: mc
done
Import all further filesystems:
Turn on DMA:
Checking:
done
Mounting:
mount: mounting /mnt/sda1/root/data on /mnt/data failed: No such file or directoryfailed
locales:
Setting timezone:done
Load keymap: de-latin1done
vdr:
Loading dvb driverdone
Loading dvb-satx driverdone
Loading usb dvb driverdone
Starting VDRdone
network:
nfs-server:
webserver:
ssh:
samba:
addons:
setup:
Starting samba server:done
Loading network driverdone
Connecting to networkdone
[4121] Aug 28 21:33:50 Running in background
Starting sshd:
Listen on IP: 192.168.1.200
done
Starting nfsserver:
done
Setting up setup menu:
done
Starting webserver:
done
[5609] Aug 28 21:34:22 Child connection from 192.168.1.238:55004
[5609] Aug 28 21:34:27 Password auth succeeded for 'root' from 192.168.1.238:5500
--- End code ---
lsmod:
--- Code: ---MLD> lsmod
Module Size Used by Tainted: G
cx23885 107840 0
videobuf_dma_sg 5540 1 cx23885
rc_core 9638 1 cx23885
altera_ci 6017 1 cx23885
cx2341x 11645 1 cx23885
v4l2_common 3678 2 cx23885,cx2341x
snd_pcm 42747 1 cx23885
snd_page_alloc 4753 1 snd_pcm
snd_timer 12025 1 snd_pcm
snd 34056 3 cx23885,snd_pcm,snd_timer
videodev 60905 3 cx23885,cx2341x,v4l2_common
tveeprom 9809 1 cx23885
videobuf_dvb 3374 1 cx23885
videobuf_core 10791 3 cx23885,videobuf_dma_sg,videobuf_dvb
dvb_core 64575 3 cx23885,altera_ci,videobuf_dvb
btcx_risc 2379 1 cx23885
tda18271 27921 1 cx23885
altera_stapl 17753 1 cx23885
nfsd 62634 4
lockd 50827 1 nfsd
sunrpc 134813 14 nfsd,lockd
r8169 33180 0
--- End code ---
Hardware:
I'ts a small Intel Celeron M 900 MHz, 1gb ram, 30W consumption, running MLD server.
I want to attach 2 dvb cards :
- Satix sky usb v2
- Terratec cinergy S7
Thanks in advance.
Christian:
Hi,
change the loglevel in the file /etc/rc.config to 3 and post the new logfile here .... :) thx
Christian:
--- Quote --- So heute nen neuen stick mit geändertem init.d script und es funktioniert das er den Treiber automatisch lädt.
Es gibt aber ein Problem wenn ich den VDR neu starte dann läd er die Treiber nicht mehr richtig. Das log reiche ich später noch nach da ich gerade nicht an den HTPC ran darf (Frau hat die Macht :D )
MegaX
--- End quote ---
Das kann glaube ich passieren. In diesem Fall "musst" du im WEBinterface einfach dein Modul auswählen (Ich glaube das richtige wird dir schon angeboten)
bitte korrigieren wenn ich falsch liege ;)
MFG
MegaX:
Hi kappa
Sorry for my english, is not so good. I hope i can help you.
TeraTec Cinergy S7
I found no Info over this card is supported on Linux.
Satix sky usb v2
You have installed three dvb-addons (dvb, dvb-usb and dvb-satx). For this card you need only the dvb-satx addon. Deinstall the dvb and dvb-usb addons and reboot.
After reboot copy v4l-cx23885-avcore-01.fw Firmware (Download) to /lib/firmware. Then modprobe cx23885 and your card run.
We will fix the Problems in the next version of this addon.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version