Archiv > Development
Xbmc-addon
P3f:
Hi,
ich habe 3 verschiedene MLD's die ich immer mit den aktuellsten Revision update. So auch diesmal mit dem XBMC-Addon. Also ich nehme das offizielle Paket bzw. alle Pakete von der Minidvblinux.de Seite, also das kann es nicht sein.
Bei einem MLD-3.0.1 VDR lässt sich das XBMC-Addon ohne Probleme installieren und nach einem reboot versuche ich dieses auch zu starten. Egal, ob über das OSD-Menue oder von der Konsole aus. Es kommt immer ein Fehlerpopup, was man leider nicht sauber lesen kann (ist so klein und dann noch oben links so daß die Hälfte verdeckt ist)
Ich habe dann gedacht ich suche mal in den Logfiles, da ja bei den funktionierenden MLD's auch ein /var/log/xbmc.log existiert. So aber nicht bei dieser MLD.
Wenn ich in das Logfile von "x" schaue, so kommt da zwar ein Hinweis, den kann ich aber nicht sauber interpretieren. Könnt ihr die Fehlermeldung genauer lesen?
--- Code: ---X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux VDRHD 3.3.1.110 #1 SMP Mon Jun 11 19:16:53 CEST 2012 i686
Kernel command line: initrd=/mld/boot/initramfs root=UUID=7eef100c-a778-4924-ad38-8b0cb4614c6d vga=0x314 splash=silent quiet apm=off hpet=disa
Build Date: 19 October 2011 05:09:41AM
xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 20 17:14:27 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
icewm-session-lite: using /root/.icewm for private configuration files
IceWM: using /root/.icewm for private configuration files
icewmbg-lite: using /root/.icewm for private configuration files
No composite extension
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: MappingNotify
icewmbg-lite: MappingNotify
/usr/bin/runvdr-sxfe: line 202: update_config: not found
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Could not load fontset "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
IceWM: Warning: Loading of fallback font "fixed" failed.
IceWM: failed to load fontset '-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*'
IceWM: Warning: Could not load font "-artwiz-snap-regular-r-normal-sans-10-*-*-*-*-*-*-*".
vdr-sxfe exits at Mi Jun 20 17:28:40 CEST 2012
switch to runxbmcX Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x1000003
Serial number of failed request: 33
Current serial number in output stream: 33
--- End code ---
Ich habe eine NVIDIA GT210 drin, die laut XBMC-Wiki eigentlich funktionieren sollte. (die anderen Clients haben aber auch andere Karten drin, daher vermute ich das hier noch treiber fehlen könnten).
Könnt ihr etwas mit der Meldung anfangen?
Gruß,
Pit
P.S: bevor ich XBMC installierte habe ich alle anderen Addons geupdatet...
P.P.S: Das gleiche passiert auch bei dem Addon XBMC.pvr (es liegt also nicht an XBMC EDEN 11.0 oder XBMC 12.0)
MarMic:
starte mal im xterm xbmc
was sagt das denn
P3f:
Hi,
habe ich den Befehl richtig im Sinn?
--- Code: ---MLD> device=:0 xbmc
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x1200003
Serial number of failed request: 33
Current serial number in output stream: 33
--- End code ---
Der Cursor bleibt in der Konsole stehen, erst wenn ich mit STRG+C den Tastaturabbruch mache, kommt die weitere Meldung:
--- Code: ---^CTraceback (most recent call last):
File "/usr/share/xbmc/FEH.py", line 173, in <module>
error("XBMC needs hardware accelerated OpenGL rendering.nInstall an appropriate graphics driver.nnPlease consult XBMC Wiki for supported hardwarenhttp://wiki.xbmc.org/?title=Supported_hardware")
File "/usr/share/xbmc/FEH.py", line 31, in error
createGTK(errorLine)
File "/usr/share/xbmc/FEH.py", line 90, in createGTK
gtk.main()
KeyboardInterrupt
--- End code ---
Gruß,
Pit
orgel:
Das xbmc.log liegt unter /root/.xbmc/temp/xbmc.log. Kontrolliere mal ob Du nicht aus versehen den xorg-nouveau statt des xorg-nvidia Treibers installiert hast, der xorg-nouveau Treiber kann meines Wissens keine Hardwarebeschleunigung bei den NV50 Chipsätzen.
Gruß
Orgel
P3f:
Hi,
folgende Addons sind bei mir active:
--- Code: ---MLD> cat /etc/addons/active
MLD-3.0.1_av-libs-0_4.sfs
MLD-3.0.1_pango-1.6.0_5.sfs
MLD-3.0.1_openjava-1.6.0.23_2.sfs
MLD-3.0.1_python-2.7_8.sfs
MLD-3.0.1_xinelib-2011.11.28_37.sfs
MLD-3.0.1_xinelib-drivers-2011.11.28_12.sfs
MLD-3.0.1_backup-2.0_46.sfs
MLD-3.0.1_perl-5.12.4_7.sfs
MLD-3.0.1_samba-3.5.11_20.sfs
MLD-3.0.1_text2skin-anthra-skins-1.1_12.sfs
MLD-3.0.1_vdradmin-am-3.6.9_27.sfs
MLD-3.0.1_lib-av-53_3.sfs
MLD-3.0.1_lib-pango-1.6.0_2.sfs
MLD-3.0.1_lib-imagemagick-6.6.0_5.sfs
MLD-3.0.1_pearldpf-simple-1.2_20.sfs
MLD-3.0.1_lib-curl-4.2.0_3.sfs
MLD-3.0.1_bash-4.2.10_3.sfs
MLD-3.0.1_ssh-0.53.1_14.sfs
MLD-3.0.1_kernel-3.3.1.110_xorg-nouveau-1.10.4_8.sfs
MLD-3.0.1_kernel-3.3.1.110_acpi-2.0.10_5.sfs
MLD-3.0.1_kernel-3.3.1.110_xorg-1.10.4_162.sfs
MLD-3.0.1_kernel-3.3.1.110_remote-autodetect-0_9.sfs
MLD-3.0.1_kernel-3.3.1.110_alsa-1.0.24.2_94.sfs
MLD-3.0.1_kernel-3.3.1.110_wakeup-1.1_13.sfs
MLD-3.0.1_kernel-3.3.1.110_xorg-autodetect-1.10.4_21.sfs
MLD-3.0.1_kernel-3.3.1.110_network-0_74.sfs
MLD-3.0.1_vch-1.1.0_8.sfs
MLD-3.0.1_lib-x-0_11.sfs
MLD-3.0.1_lib-xine-2012.06.16_4.sfs
MLD-3.0.1_lib-xine-drivers-2012.06.16_2.sfs
MLD-3.0.1_kernel-3.3.1.110_lirc-2012.06.11_84.sfs
MLD-3.0.1_locales-0_48.sfs
MLD-3.0.1_mplayer-4.6.1_12.sfs
MLD-3.0.1_vdr-1.7.27.332_setup-0.3.1_45.sfs
MLD-3.0.1_vdr-1.7.27.332_block-2012.05.01_1.sfs
MLD-3.0.1_vdr-1.7.27.332_arghdirector-0.2.7_9.sfs
MLD-3.0.1_vdr-1.7.27.332_noepg-0.0.3_2.sfs
MLD-3.0.1_vdr-1.7.27.332_undelete-0.0.6_4.sfs
MLD-3.0.1_vdr-1.7.27.332_fritzbox-1.5.0_6.sfs
MLD-3.0.1_vdr-1.7.27.332_osdpip-2012.05.16_10.sfs
MLD-3.0.1_vdr-1.7.27.332_duplicates-0.0.3_1.sfs
MLD-3.0.1_vdr-1.7.27.332_markad-2012.05.22_9.sfs
MLD-3.0.1_vdr-1.7.27.332_mplayerplugin-2010.12.12_5.sfs
MLD-3.0.1_vdr-1.7.27.332_text2skin-2012.06.04_14.sfs
MLD-3.0.1_vdr-1.7.27.332_osdteletext-2012.04.04_11.sfs
MLD-3.0.1_vdr-1.7.27.332_addons-0.4.0_44.sfs
MLD-3.0.1_vdr-1.7.27.332_yaepghd-0.0.3.ce_5.sfs
MLD-3.0.1_vdr-1.7.27.332_graphlcd-2011.03.23_8.sfs
MLD-3.0.1_vdr-1.7.27.332_femon-1.7.17_5.sfs
MLD-3.0.1_vdr-1.7.27.332_332.sfs
MLD-3.0.1_webserver-0_171.sfs
MLD-3.0.1_kernel-3.3.1.110_xorg-nvidia-295.59_83.sfs
MLD-3.0.1_kernel-3.3.1.110_dvb-2012.06.20_149.sfs
MLD-3.0.1_kernel-3.3.1.110_dvb-usb-2012.06.20_46.sfs
MLD-3.0.1_vdr-1.7.27.332_epgsearch-2012.06.19_7.sfs
MLD-3.0.1_vdr-1.7.27.332_extrecmenu-2012.06.17_6.sfs
MLD-3.0.1_kernel-3.3.1.110_graphlcd-base-2012.06.17_17.sfs
MLD-3.0.1_vdr-1.7.27.332_xineliboutput-2012.06.14_98.sfs
MLD-3.0.1_xbmc-11.0.20120321_69.sfs
--- End code ---
edit: mit dem Display kann es nicht zusammen hängen, das wäre noch ein Unterschied zu den anderen funktionierenden MLD's? Habe ein Pearl-Display dran!
==> und sollte ich das xorg-nouveau deaktivieren, nachdem das xorg-nvidia aktiv ist?
Gruß,
Pit
Navigation
[0] Message Index
[#] Next page
Go to full version