Archiv > General
Usb-addon Nur Für Linuxdateisystem?
MarMic:
hmm tatsächlich:
--- Code: ---usb 1-2: new high-speed USB device number 5 using ehci_hcd
scsi3 : usb-storage 1-2:1.0
scsi 3:0:0:0: Direct-Access Kingston DataTraveler R PMAP PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] 3903488 512-byte logical blocks: (1.99 GB/1.86 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdc] No Caching mode page present
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] No Caching mode page present
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 3:0:0:0: [sdc] No Caching mode page present
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Attached SCSI removable disk
MLD>
--- End code ---
stick dran wie man oben sieht.
unter media wird 1 erstellt:
--- Code: ---MLD> ls /media/
1 RECORD
MLD>
--- End code ---
1 ist aber leer (record ist meien ntfs platte!)
blkid:
--- Code: ---MLD> blkid
/dev/sdc1: UUID="AC9D-8641"
/dev/sda2: UUID="f88e5819-bdc0-4140-9430-3ed3c9ede11d"
/dev/sda1: UUID="741da8ac-bedf-415d-b493-fac8e2342cf4"
MLD>
--- End code ---
handelt sich um fat16 > strange
--- Code: --- Device Boot Start End Blocks Id System
/dev/sdc1 * 1 243 1951712+ 6 FAT16
Partition 1 has different physical/logical endings:
phys=(241, 254, 63) logical=(242, 250, 8)
MLD>
--- End code ---
fu** könnte es an der bb liegen?
catsysinit :-(
--- Code: ---vfat filesystem found on /dev/sdc1
Mounting to /media/1 sdc
usb-2:
BusyBox v1.19.4 (2012-02-09 03:55:32 CET) multi-call binary.
Usage: mount [OPTIONS] [-o OPTS] DEVICE NODE
Mount a filesystem. Filesystem autodetection requires /proc.
-a Mount all filesystems in fstab
-i Don't run mount helper
-r Read-only mount
-w Read-write mount (default)
-t FSTYPE Filesystem type
-O OPT Mount only filesystems with option OPT (-a only)
-o OPT:
loop Ignored (loop devices are autodetected)
[a]sync Writes are [a]synchronous
[no]atime Disable/enable updates to inode access times
[no]diratime Disable/enable atime updates to directories
[no]relatime Disable/enable atime updates relative to modification time
[no]dev (Dis)allow use of special device files
[no]exec (Dis)allow use of executable files
[no]suid (Dis)allow set-user-id-root programs
[r]shared Convert [recursively] to a shared subtree
[r]slave Convert [recursively] to a slave subtree
[r]private Convert [recursively] to a private subtree
[un]bindable Make mount point [un]able to be bind mounted
[r]bind Bind a file or directory [recursively] to another location
move Relocate an existing mount point
remount Remount a mounted filesystem, changing flags
ro/rw Same as -r/-w
There are filesystem-specific -o flags.
--- End code ---
ntfs tut weiterhin wunderbar:
--- Code: ---ntfs filesystem found on /dev/sdc1
Mounting to /media/RECORD:
--- End code ---
@claus lässt sich das fixxen oder müssen wir ehct zurück auf ne 1.18.x bb?
clausmuus:
Hm, das hatte ich doch schon mal. Ich dachte es geflickt zu haben. Möglicherweise hatte ich das aber nur auf meinem MLD-PC korrigiert, und den Fix nicht in's svn übertragen. Ich werd's mir anschauen.
Dabei kommt mir auch ne Idee, warum möglicherweise mein VDR Update nicht geklappt hat. Ich ändere ja immer wieder mal zum Testen einige Dateien auf meinem MLD-PC. Möglicherweise ist da auch ne
MarMic:
-> werksreset option ein rmcp_all ;)
greetz MarMic
clausmuus:
Ich bin nicht sicher ob ich's behoben hab. Ihr könnt's ja mal mit dem neuen usb-Addon versuchen. Ansonsten brauche ich mal Eure /var/spool/usb.ids
Claus
MarMic:
nun tut auch vfat!
--- Code: ---vfat filesystem found on /dev/sdc1
Mounting to /media/usb-2:
--- End code ---
und auch ntfs noch :-P
--- Code: ---ntfs filesystem found on /dev/sdc1
Mounting to /media/RECORD:
--- End code ---
super danke!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version