1 2 [3] 4 >>> Archiv / MLD 3.x / Development / !achtung! Bitte Alle Das Standard Iso Testen
 

Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1460
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #30 on: January 17, 2012, 17:34:23 »
Hi Bernd,

das mit Samba ist natürlich klar.... Aber ssh sollte möglich sein, und das /var/log/install.log ist so überschaubar, das man auch Copy & Paste rüberziehen könnte.

Als ich in den letzten Malen die Probleme hatte, konnte ich diesen Weg gehen.

Und nur zur Sicherheit, du hast schon das aktuellste ISO runtergeladen und installierst von CD? (Nicht böse sein, aber das Phänomen welches Du beschreibst war auch bei mir Anfang Januar und lag im DVB-Addon (==> Kernel-Panic)

Gruß, und bis später...

Pit
Logged
----------------------------------------------------------------------
VDR 1:(MLD 5.4-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1460
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #31 on: January 17, 2012, 17:43:53 »
Hi MarMic,

hast Du mal eine Rückmeldung erhalten zu einer Hauppauge DVB-S2 (PCI-Karte)?

Hintergrund meiner Frage: Ich war gestern Abend bei einem Freund und wollte seine MLD aktualisieren (von MLD 3.0 aus Oktober 2011). Also habe ich das aktuelle ISO dort installiert und es hat auch mit Neuformatierung auf der Systempartition alles geklappt.
Bei meinem Freund ist eine CINE S2 V5.5 (Duokarte) und eine Hauppauge DVB-S2 eingebaut gewesen. Es wurden alle 3 Satempfänger erkannt und aktiviert. Allerdings sind auf einigen Sendern massive Artefakte und Tonprobleme entstanden. Nach ein wenig suchen habe ich gesehen, bei der FEMON-Anzeige die Werte massiv nach unten gehen sobald auf die Hauppauge DVB-S2 Karte geschaltet worden ist.

Also ich denke das die DVB-Treiber für diese Karte noch nicht optimal sind.

Ich habe die Karte nun ausgebaut und der VDR funktioniert einwandfrei (halt nur mit 2 Tunern, was ja im Normalfall auch ausrecicht  ;) )

Leider konnte ich nicht länger die Karte drin lassen, da die MLD nicht zur Analyse im Netz erreichbar für mich ist. (Schlechte Leitung, da er auf dem platten Land wohnt...) Ich werde die Karte nun in einem meiner Hardware einbauen müssen und dann mal analysieren.

Aber vielleicht hast Du ja schon von dem Problem gehört? Und bist am Thema? Oder sollen wir warten auf den 3.2.1 Kernel mit aktuellen DVB-Treibern (>API 5.3) mit VDR 1.7.23 (==> also bis zur Rückkehr von Claus?)

Gruß,

Pit
Logged
----------------------------------------------------------------------
VDR 1:(MLD 5.4-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #32 on: January 17, 2012, 18:40:53 »
das hört sich stark nach meinem problem an.

tevii s480 -> neue treiber -> artefakte und ton probleme!
alte treiber -> alles ok

noch weiter zurück wollte ich eigentlich nicht, da man dadurch immer mehr feature verliert. ich weiss nicht mal ob wir den neuen vdr nutzen können mit unserem treiber stand. da ist zZ soviel im umbau das ich dazu nichts sagen kann :-(

du kannst mal probieren in ner develumgebung den link dvb-2011.12.25 zu löschen und gegen einen älteren zu setzen! dann sollte die karte auch wieder laufen.

die frage ist: sollten wir einfach freezen oder vllt mal die linuxtv jungs anschreiben? da mir dazu aber die lust/zeit fehlt.

habe ich nun einfach auf den 25.12 festgelegt wo noch das meiste lief.

greetz MarMic

p.s. mit 3.2.1 und den neusten treibern habe ich weiterhin artefakte!
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #33 on: January 17, 2012, 20:39:50 »
@p3f: ich habe die ff-sd 3.0.1-2012.01.12_42 vom 13.1 auf cd gebrannt und von dieser via OSD installiert.

automatisch funktioniert tadellos.

manuell partitioniert MLD nur und dann kann ich am OSD nix mehr machen. Für mich sieht das so aus als ob da ein script keinen Bock mehr hat, denn eine Fehlermeldung kommt da nicht :-)

install.log
Quote

==partitioning disk hdb==
1024+0 records in
1024+0 records out
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.


The number of cylinders for this disk is set to 76319.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-76319, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-76319, default 76319):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (2-76319, default 2): Using default value 2
Last cylinder or +size or +sizeM or +sizeK (2-76319, default 76319):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (9540-76319, default 9540): Using default value 9540
Last cylinder or +size or +sizeM or +sizeK (9540-76319, default 76319): Using default value 76319

Command (m for help): Partition number (1-4):
Command (m for help): Partition number (1-4):
Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table

Disk /dev/hdb: 80.0 GB, 80026361856 bytes
64 heads, 32 sectors/track, 76319 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/hdb1   *        2048    19535871     9766912  83 Linux
/dev/hdb2        19535872   156301311    68382720  83 Linux
------ done ------

Via Webinterface funktioniert die Installation fehlerfrei. Achja die Daten hab ich doch via samba rübergezogen.

Ich bin nach wie vor begeistert.

Gruß Bernd  
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1460
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #34 on: January 17, 2012, 21:14:13 »
@Bernd:
Ok, dann werde ich morgen meinen SD-MLD auch noch einmal per OSD neu machen. Hast Du zufällig noch geschaut ob unter /var/log/messages etwas geloggt worden ist? Hatte ich nicht geschrieben, aber vielleicht hast Du trotzdem mal dort geschaut.

Aber ansonsten brauchst Du es natürlich nicht noch einmal machen, übers Webif hat es ja funktioniert. Und das andere werde ich noch weiter analysieren.

Danke für deine Fehlermeldung, magst Du bitte einen Bugtracker eintrag aufmachen. Dann geht es nicht unter.... Danke.

Gruß,

Pit
Logged
----------------------------------------------------------------------
VDR 1:(MLD 5.4-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #35 on: January 17, 2012, 21:22:39 »
Hi Pit, wenns hilft, die messages:

Quote
Jan 17 19:10:37 (none) syslog.info syslogd started: BusyBox v1.18.5
Jan 17 19:10:37 (none) user.warn kernel: aufs au_warn_loopback:111:loop0[2247]: you may want to try another patch for loopback file on iso9660(0x9660) branch
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2249]: uid/gid/perm /var/spool/apm.mnt/locales 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2262]: uid/gid/perm /var/spool/apm.mnt/install 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2275]: uid/gid/perm /var/spool/apm.mnt/dvb 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2288]: uid/gid/perm /var/spool/apm.mnt/network 0/0/0777, 0/0/01777
Jan 17 19:10:37 (none) user.warn kernel: aufs test_add:262:mount[2301]: uid/gid/perm /var/spool/apm.mnt/webserver 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2314]: uid/gid/perm /var/spool/apm.mnt/remote-autodetect 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2327]: uid/gid/perm /var/spool/apm.mnt/vdr 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2340]: uid/gid/perm /var/spool/apm.mnt/addons 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2357]: uid/gid/perm /var/spool/apm.mnt/dvbsddevice 0/0/0777, 0/0/01777
Jan 17 19:10:38 (none) user.warn kernel: aufs test_add:262:mount[2374]: uid/gid/perm /var/spool/apm.mnt/setup 0/0/0777, 0/0/01777
Jan 17 19:10:55 (none) user.info kernel: Linux video capture interface: v2.00
Jan 17 19:10:55 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jan 17 19:10:55 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jan 17 19:10:55 (none) user.err kernel:  enough quality for its usage in production.
Jan 17 19:10:55 (none) user.err kernel:  Use it with care.
Jan 17 19:10:55 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan 17 19:10:55 (none) user.err kernel:  1a5cd29631a6b75e49e6ad8a770ab9d69cda0fa2 [media] tda10021: Add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel:  27d9a5e93842852c198aae9f45fd6c272bf2b374 [media] tda10021: Don't use a magic numbers for QAM modulation
Jan 17 19:10:55 (none) user.err kernel:  74b4576e63ec4cc765271db8815a42aa8f80ed14 [media] tda10023: add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel: WARNING: You are using an experimental version of the media stack.
Jan 17 19:10:55 (none) user.err kernel:  As the driver is backported to an older kernel, it doesn't offer
Jan 17 19:10:55 (none) user.err kernel:  enough quality for its usage in production.
Jan 17 19:10:55 (none) user.err kernel:  Use it with care.
Jan 17 19:10:55 (none) user.err kernel: Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
Jan 17 19:10:55 (none) user.err kernel:  1a5cd29631a6b75e49e6ad8a770ab9d69cda0fa2 [media] tda10021: Add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.err kernel:  27d9a5e93842852c198aae9f45fd6c272bf2b374 [media] tda10021: Don't use a magic numbers for QAM modulation
Jan 17 19:10:55 (none) user.err kernel:  74b4576e63ec4cc765271db8815a42aa8f80ed14 [media] tda10023: add support for DVB-C Annex C
Jan 17 19:10:55 (none) user.info kernel: saa7146: register extension 'av7110'
Jan 17 19:10:55 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 6
Jan 17 19:10:55 (none) user.debug kernel: PCI: setting IRQ 6 as level-triggered
Jan 17 19:10:55 (none) user.info kernel: av7110 0000:01:09.0: PCI INT A -> Link[LNKF] -> GSI 6 (level, low) -> IRQ 6
Jan 17 19:10:55 (none) user.info kernel: saa7146: found saa7146 @ mem e0844000 (revision 1, irq 6) (0x13c2,0x0003)
Jan 17 19:10:55 (none) user.info kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X)
Jan 17 19:10:55 (none) user.warn kernel: adapter has MAC addr = 00:d0:5c:21:d1:74
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80fb2624
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Jan 17 19:10:58 (none) user.warn kernel: dvb-ttpci: adac type set to 0 @ card 0
Jan 17 19:10:58 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Jan 17 19:10:58 (none) user.info kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Jan 17 19:10:58 (none) user.warn kernel: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Jan 17 19:10:58 (none) user.info kernel: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:01:09.0/input/input1
Jan 17 19:10:58 (none) user.info kernel: dvb-ttpci: found av7110-0.
Jan 17 19:11:16 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:11:16 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
Jan 17 19:11:16 (none) user.debug kernel: PCI: setting IRQ 12 as level-triggered
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe09fe000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:11:16 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:11:26 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 20:11:59 (none) auth.info login[7797]: root login on 'tty1'
Jan 17 20:11:59 (none) auth.info login[7799]: root login on 'tty2'
Jan 17 20:11:59 (none) auth.info login[7803]: root login on 'tty3'
Jan 17 20:11:59 (none) auth.info login[7808]: root login on 'tty4'
Jan 17 19:20:58 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:21:00 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:21:00 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:21:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe1672000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:21:27 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:21:28 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:21:28 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:21:28 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe171e000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:21:59 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:22:00 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe17dc000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:22:00 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:22:10 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 19:24:42 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A disabled
Jan 17 19:24:43 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan 17 19:24:43 (none) user.info kernel: 8139too 0000:01:0e.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
Jan 17 19:24:43 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: RealTek RTL8139 at 0xe1b62000, 00:c1:26:02:5f:ef, IRQ 12
Jan 17 19:24:44 (none) user.info kernel: 8139too 0000:01:0e.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Jan 17 19:24:54 (none) user.debug kernel: eth0: no IPv6 routers present
Jan 17 19:26:13 (none) user.warn kernel: aufs au_warn_loopback:111:loop10[11843]: you may want to try another patch for loopback file on tmpfs(0x1021994) branch
Jan 17 19:26:14 (none) user.warn kernel: aufs test_add:262:mount[11942]: uid/gid/perm /var/spool/apm.mnt/samba 0/0/0777, 0/0/01777
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:25 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:25 (none) user.err vdr: [2960] retrying
Jan 17 19:26:25 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:28 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:28 (none) user.err vdr: [2960] retrying
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:28 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: can't set PID 301 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:29 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 3 on device 1
Jan 17 20:26:29 (none) user.err vdr: [2960] retrying
Jan 17 19:26:29 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:30 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:30 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:30 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:31 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:31 (none) user.err vdr: [2960] retrying
Jan 17 19:26:31 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:32 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:32 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:32 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:33 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:33 (none) user.err vdr: [2960] retrying
Jan 17 19:26:33 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:34 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:34 (none) user.err vdr: [2960] retrying
Jan 17 19:26:34 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: can't set PID 201 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:37 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 2 on device 1
Jan 17 20:26:37 (none) user.err vdr: [2960] retrying
Jan 17 19:26:37 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:26:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:26:39 (none) user.err vdr: [2960] retrying
Jan 17 19:26:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:26:39 (none) daemon.err nmbd[11984]: [2012/01/17 20:26:39.113473,  0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   *****
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   Samba name server MLD is now a local master browser for workgroup  on subnet 192.168.178.3
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   
Jan 17 20:26:39 (none) daemon.err nmbd[11984]:   *****
Jan 17 20:27:23 (none) daemon.err smbd[16227]: [2012/01/17 20:27:23.712050,  0] smbd/service.c:1031(make_connection_snum)
Jan 17 20:27:23 (none) daemon.err smbd[16227]:   '/mnt/dvd' does not exist or permission denied when connecting to [dvd] Error was No such file or directory
Jan 17 20:27:23 (none) daemon.err smbd[16227]: [2012/01/17 20:27:23.721998,  0] smbd/service.c:1031(make_connection_snum)
Jan 17 20:27:23 (none) daemon.err smbd[16227]:   '/mnt/dvd' does not exist or permission denied when connecting to [dvd] Error was No such file or directory
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:05 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:05 (none) user.err vdr: [2960] retrying
Jan 17 19:28:05 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:44 (none) user.err vdr: [2960] ERROR (svdrp.c,432): Broken pipe
Jan 17 19:28:45 (none) user.info kernel:  hdb: hdb1 hdb2
Jan 17 19:28:45 (none) user.info kernel:  hdb: hdb1 hdb2
Jan 17 19:28:53 (none) user.info kernel: vdr[2960]: segfault at 0 ip 08112025 sp bf87cce0 error 4 in vdr[8048000+148000]
Jan 17 20:29:18 (none) daemon.err smbd[16227]: [2012/01/17 20:29:18.553803,  0] smbd/nttrans.c:2271(call_nt_transact_ioctl)
Jan 17 20:29:18 (none) daemon.err smbd[16227]:   call_nt_transact_ioctl(0x1401c4): Currently not implemented.


Fand die log aber nicht sonderlich auffällig was den Fehler betrifft. Die sysinit kann ich nicht öffen. Mist, konnte ich aber mal. BUG kommt. Gruß Bernd  
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #36 on: January 18, 2012, 10:23:37 »
mir gefällt das hier mal ganz und gar nicht:

Code: [Select]
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,338): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: can't set PID 101 on device 1
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR (dvbsdffdevice.c,350): Invalid argument
Jan 17 20:28:39 (none) user.err vdr: [2960] ERROR: failed to set PIDs for channel 1 on device 1
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 19:28:39 (none) user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Jan 17 20:28:39 (none) user.err vdr: [2960] retrying
hattest du da mit dvb_all gestartet oder sowas?

greetz MarMic
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #37 on: January 18, 2012, 11:12:37 »
@MarcMic:

Quote
hattest du da mit dvb_all gestartet oder sowas?

Der DVB Treiber steht doch immer auf "all" ?

Ich hab nur die CD eingelegt, gestartet, Sprache gewählt, Astra gewählt, Tastaturlayot beibehalten, Netzwerk konfiguriert, Samba installiert und versucht die manuelle Installation zu starten.

Ich meine aber das nach der Installation die "messages" nicht so voll ist.

Gruß Bernd
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #38 on: January 18, 2012, 11:22:24 »
hmm dvb-all meinte ich die kanalliste! aber wenn du astra genommen hat dann passts ja.

mich hats gewundert -> die sehen serh seltsam aus, aber scheitn so als wäre vdr -l 3?

treiber stehen nicht mehr auf "all" sondern auf "auto".

naja du kannst ja dann so spassige sachen testen die nur für sd-ff funtzen wie avards... und grün stellen. das wäre super.

greetz MarMic
 
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #39 on: January 18, 2012, 11:34:51 »
grün stellen mach ich gerne :-)
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline P3f

  • Administrator
  • Expert Member
  • ********
  • Posts: 1460
    • View Profile
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #40 on: January 18, 2012, 20:05:59 »
Hi Bernd,

so nun bin ich fast am verzweifeln.  :wand

Ich habe mir heute noch einmal das ff-sd-ISO file gedownloaded und eine neue Festplatte ans System geschlossen. Und es hat immer funktioniert. Also egal, ob ich per OSD oder per Webif und/oder automatisch bzw. individuell installiert habe.

Was mir nur an deinen Rückmeldungen auffällt ist, das dort immer mal wieder DVB-C mit einem Abbruch angezeigt wird. Was ich leider nicht testen kann/konnte ist, das ich keine IDE-Platte angeschlossen habe. Ich habe (leider) nur noch SATA-Platte(n).

Vielleicht sollten wir noch auf Claus warten, er sieht bestimmt klarer ;(

Bei der Installation mache ich allerdings auch noch keinerlei Einstellungen. Also CD rein und booten, dann den Installer aufrufen (Webif bzw. OSD) und dann die INstallation starten. Erst nach dem Reboot (ohne CD) mache ich Einstellungen wie Netzwerk, Fernbedienung, Kanalliste, usw.

Machst Du es anders? Warum kommt es bei Dir zu einem Segfault at ip?

Quote
Jan 17 19:28:53 (none) user.info kernel: vdr[2960]: segfault at 0 ip 08112025 sp bf87cce0 error 4 in vdr[8048000+148000]
Jan 17 20:29:18 (none) daemon.err smbd[16227]: [2012/01/17 20:29:18.553803,  0] smbd/nttrans.c:2271(call_nt_transact_ioctl)
Jan 17 20:29:18 (none) daemon.err smbd[16227]:  call_nt_transact_ioctl(0x1401c4): Currently not implemented.

Also wie gesagt, ich konnte nicht mit /dev/hda testen, da das die IDE/P-ATA Platten sind....

Tut mir leid, aber ich sehe dein Problem nicht.

Gruß,

Pit
« Last Edit: January 18, 2012, 20:06:18 by P3f »
Logged
----------------------------------------------------------------------
VDR 1:(MLD 5.4-64), ZOTAC ION ITX F-E, 1GB 1033, ATRIC-Einschalter, ImonLCD, Cinergy S2 HD
VDR 2 MLD-BPI: BananaPI | 16 GB SD-Card | MLD 5.3 in Entwicklung
MLD-WTK: WeTek-Play | 8 GB MicroSD-Card | MLD 5.3 als SatIP-Server

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #41 on: January 18, 2012, 21:12:22 »
Einstellung vor der Installation hab ich nur gemacht um die ganze Angelegenheit zu loggen. Der Fehler oder Abbruch kommt auch ohne das ich irgendwas anderes mache. Also CD rein und booten, dann den Installer aufrufe. Automatisch und per WebIF funktioniert es ja. Halt nur manuell via OSD nicht. Vielleicht liegt es ja tatsächlich an IDE.  
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20192
    • View Profile
    • ClausMuus.de
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #42 on: February 01, 2012, 17:24:06 »
könnte es sein, das über's OSD ne Nachfrage kommt, ob ne bestimmte Aktion ausgeführt werden soll, DU die jedoch nicht siehst und deshalb nicht beantwortest? Dann würde die Installation natürlich hängen bleiben. Nach dem Partitioinieren (vor dem Formatieren) wird bei der Manuellen Installation nachgefragt ob diese Aktion ausgeführt werden soll.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Bernd

  • Profi Member
  • ****
  • Posts: 492
    • View Profile
    • http://
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #43 on: February 02, 2012, 20:25:09 »
die nachfrage kam auch. ich glaube ich musste zweimal mit return bestätigen. eben nochmal versucht manuell zu installieren. kann leider nicht immer und immer wieder installieren, da mir meine Frau sonst den Kopf abreist :)  
Logged
MLD 3.0,  CUSL2-C Asus, P III mit 933Mhz, 512MB Ram, 160 GB, Nexus S, DVD-Brenner, lirc serial

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20192
    • View Profile
    • ClausMuus.de
!achtung! Bitte Alle Das Standard Iso Testen
« Reply #44 on: February 03, 2012, 13:26:31 »
Was ist nun das Ergebnis deiner weiteren Tests? Kam die Nachfrage und hast Du die (zweimal) bestätigt? Funktionierte dann die manuelle Installation?

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

1 2 [3] 4 >>> Archiv / MLD 3.x / Development / !achtung! Bitte Alle Das Standard Iso Testen
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.