Archiv > Development

Bugs In Mld-3.x

<< < (29/81) > >>

clausmuus:
ok, die sollten bei den nächsten updates nach und nach wieder raus fliegen.

Claus

Matthias:

--- Quote --- ok, die sollten bei den nächsten updates nach und nach wieder raus fliegen.

Claus
--- End quote ---
Noch ein Ausschnitt aus der sysinit (ich hoffe der richtige Teil)

--- Code: ---/dev/loop10 on /var/spool/apm.mnt/setup type squashfs (ro,relatime)
failed
Importing addon: mc
done
Importing addon: xorg-nvidia
done
Importing addon: message
done
Importing addon: xinelib
done
Importing addon: addons
done
Importing addon: lirc
done
Load german keymap:
Loading /usr/share/keymaps/i386/qwertz/de-latin1.map.gz
done

--- End code ---
Danach bricht das Logging ab da ja an der Stelle auch die MLD stoppt

clausmuus:
fast. Ich brauche genau den Bereich vor dem "failed", ab dem letzten "done" davor.  

Matthias:
Hilft das noch weiter:
Zu Beginn war Lirc nicht installiert (etc/addons):


--- Quote ---MLD> apm erase lirc
umount: can't umount /var/spool/apm.mnt/lirc: Invalid argument
MLD> apm erase lirc -f
apm: lirc: not installed
MLD> apm i lirc -a
get addon: lirc
Connecting to www.minidvblinux.dyndns.org (78.47.111.107:80)
MLD-3.0.0_kernel-2.6 100% |*******************************|   680k 00:00:00 ETA
install addon: lirc
ln: /dev/lircd: File exists

--- End quote ---

Sysinit:

--- Quote ---brw-rw----    1 root     root        7,   8 Dec 20 21:49 8
brw-rw----    1 root     root        7,   9 Dec 20 21:49 9
rootfs on / type rootfs (rw)
tmpfs on /mnt/system type tmpfs (rw,relatime)
/dev/hda1 on /mnt/hda1 type ext3 (rw,relatime,errors=continue,barrier=0,data=writeback)
aufs on / type aufs (rw,relatime,si=be890423)
proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
sysfs on /sys type sysfs (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
/dev/hda2 on /mnt/hda2 type xfs (rw,relatime,attr2,noquota)
/dev/hda1 on /etc/addons type ext3 (rw,relatime,errors=continue,barrier=0,data=writeback)
/dev/loop0 on /var/spool/apm.mnt/keymap-de type squashfs (ro,relatime)
/dev/loop1 on /var/spool/apm.mnt/config type squashfs (ro,relatime)
/dev/loop2 on /var/spool/apm.mnt/locales type squashfs (ro,relatime)
/dev/loop4 on /var/spool/apm.mnt/dvb-usb type squashfs (ro,relatime)
/dev/loop5 on /var/spool/apm.mnt/network type squashfs (ro,relatime)
/dev/loop3 on /var/spool/apm.mnt/dvb type squashfs (ro,relatime)
/dev/loop6 on /var/spool/apm.mnt/ssh type squashfs (ro,relatime)
/dev/loop7 on /var/spool/apm.mnt/vdr type squashfs (ro,relatime)
/dev/loop8 on /var/spool/apm.mnt/addons type squashfs (ro,relatime)
/dev/loop9 on /var/spool/apm.mnt/xorg type squashfs (ro,relatime)
/dev/loop10 on /var/spool/apm.mnt/setup type squashfs (ro,relatime)
--failed--
Importing addon: mc
--done--
Importing addon: xineliboutput
--done--
Importing addon: lirc
--done--
Importing addon: alsa
--done--
Importing addon: xorg-nvidia
--done--
Importing addon: xinelib
--done--
Importing addon: message
--done--
Load german keymap:
Loading /usr/share/keymaps/i386/qwertz/de-latin1.map.gz
--done--

--- End quote ---

Matthias:
Beim Booten sehe ich im Log folgenden Eintrag:


--- Code: ---Loading usb dvb driver
done
/usr/bin/vdr: /usr/lib/libjpeg.so.62: no version information available (required by /usr/bin/vdr)
Starting VDR
done

--- End code ---

Wichtig?

Navigation

[0] Message Index

[#] Next page

[*] Previous page