Hallo Roland,
ja, jetzt geht da einiges mehr.
fan2 muss dann der Lüfter sein.
CPUTIN die Anzeige aus dem Bios für die CPU temp
SYSTIN die Anzeige aus dem Bios für das M.board
Nur unter systeminfo noch die falschen Temp.werte mit diesem offset und rpm noch nicht angezeigt.
root@MLD:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +33.0°C (high = +105.0°C, crit = +105.0°C)
Core 0: +33.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +33.0°C (high = +105.0°C, crit = +105.0°C)
Core 2: +33.0°C (high = +105.0°C, crit = +105.0°C)
Core 3: +33.0°C (high = +105.0°C, crit = +105.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +32.0°C
nct6796-isa-0290
Adapter: ISA adapter
Vcore: 816.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.82 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.33 V (min = +2.98 V, max = +3.63 V)
in4: 1.68 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 176.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 120.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.41 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.25 V (min = +2.70 V, max = +3.63 V)
in9: 0.00 V (min = +0.00 V, max = +0.00 V)
in10: 120.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 128.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 160.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in13: 144.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.68 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 2611 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +20.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +26.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +108.5°C sensor = thermistor
AUXTIN1: +120.0°C sensor = thermistor
AUXTIN2: +120.0°C sensor = thermistor
AUXTIN3: -13.0°C sensor = thermistor
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
Agent0 Dimm0: +0.0°C
Agent0 Dimm1: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
Users Online