MLD-6.x > General
MLD 6.5 x86 Installation auf eMMC
Marcus:
Das klingt super, ich danke dir! Oben im ersten Post ist ein Link zur Kernelconfig für den 3040. Denke damit sollte ein Vergleich zur Kernelconfig der MLD möglich sein?
rfehr:
Hi Marcus,
ich habe dir eine Link geschickt, wo das Image runter laden kannst.
Mal sehen ob damit die eMMC erkannt wird.
Gruß,
Roland
Marcus:
Krass, das war schnell! ;D
Ich lad es gerade runter und teste umgehend.
EDIT: Leider nein. Habe die Ausgabe von dmesg gerade mit der alten verglichen. Fast exakt identisch. Bluetooth scheint jetzt die Firmware geladen bekommen zu haben. Das ist vorher gescheitert. Von eMMC keine Spur.
EDIT#2: Ich habe mld-image-netinstall-x86-64.iso heruntergeladen und getestet. War das das richtige ISO?
rfehr:
Kannst du nochmal ein dmesg machen
Marcus:
--- Code: ---Linux version 6.6.21-yocto-standard (oe-user@oe-host) (x86_64-mld-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240716) #1 SMP PREEMPT_DYNAMIC Tue Mar 19 16:42:51 UTC 2024
Command line: initrd=\initrd LABEL=normal net.ifnames=0
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007a6e9fff] usable
BIOS-e820: [mem 0x000000007a6ea000-0x000000007a719fff] reserved
BIOS-e820: [mem 0x000000007a71a000-0x000000007a746fff] ACPI data
BIOS-e820: [mem 0x000000007a747000-0x000000007a80efff] ACPI NVS
BIOS-e820: [mem 0x000000007a80f000-0x000000007abdbfff] reserved
BIOS-e820: [mem 0x000000007abdc000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
APIC: Static calls initialized
efi: EFI v2.4 by American Megatrends
efi: ACPI=0x7a723000 ACPI 2.0=0x7a723000 SMBIOS=0x7a9f7000 ESRT=0x7a9e7598 SMBIOS 3.0=0x7a9f6000 INITRD=0x7686b598
efi: Remove mem26: MMIO range=[0xfea00000-0xfeafffff] (1MB) from e820 map
e820: remove [mem 0xfea00000-0xfeafffff] reserved
efi: Not removing mem27: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
efi: Not removing mem28: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
efi: Not removing mem29: MMIO range=[0xfed03000-0xfed03fff] (4KB) from e820 map
efi: Not removing mem30: MMIO range=[0xfed06000-0xfed06fff] (4KB) from e820 map
efi: Not removing mem31: MMIO range=[0xfed08000-0xfed09fff] (8KB) from e820 map
efi: Not removing mem32: MMIO range=[0xfed1c000-0xfed1cfff] (4KB) from e820 map
efi: Remove mem33: MMIO range=[0xfed80000-0xfedbffff] (0MB) from e820 map
e820: remove [mem 0xfed80000-0xfedbffff] reserved
efi: Not removing mem34: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem35: MMIO range=[0xffa00000-0xffffffff] (6MB) from e820 map
e820: remove [mem 0xffa00000-0xffffffff] reserved
SMBIOS 3.0.0 present.
DMI: Dell Inc. Wyse 3040 Thin Client/05MW5F, BIOS 1.2.5 08/20/2018
tsc: Detected 1440.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR map: 4 entries (2 fixed + 2 variable; max 18), built from 8 variable MTRRs
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
esrt: Reserving ESRT space from 0x000000007a9e7598 to 0x000000007a9e75d0.
Secure boot disabled
RAMDISK: [mem 0x752d0000-0x7588efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A723000 000024 (v02 DELL )
ACPI: XSDT 0x000000007A7230A0 0000C4 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000007A740728 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000007A7231F8 01D52A (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 0x000000007A80EF80 000040
ACPI: APIC 0x000000007A740838 000084 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000007A7408C0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000007A740908 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000007A7409A8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007A7409E8 0041C5 (v01 DptfTb DptfTab 00001000 INTL 20120913)
ACPI: SSDT 0x000000007A744BB0 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913)
ACPI: SSDT 0x000000007A745208 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913)
ACPI: UEFI 0x000000007A745260 000042 (v01 DELL CBX3 00000000 00000000)
ACPI: SSDT 0x000000007A7452A8 000269 (v01 UsbCTb UsbCTab 00001000 INTL 20120913)
ACPI: HPET 0x000000007A745518 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x000000007A745550 000763 (v01 PmRef CpuPm 00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745CB8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913)
ACPI: SSDT 0x000000007A745F48 00017A (v01 PmRef ApTst 00003000 INTL 20120913)
ACPI: LPIT 0x000000007A7460C8 000104 (v01 DELL CBX3 00000005 MSFT 0100000D)
ACPI: BCFG 0x000000007A7461D0 000139 (v01 INTEL BATTCONF 00000001 INTL 00000000)
ACPI: PRAM 0x000000007A746310 000030 (v01 00000001 00000000)
ACPI: BGRT 0x000000007A746340 000038 (v00 01072009 AMI 00010013)
ACPI: CSRT 0x000000007A746378 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
ACPI: WDAT 0x000000007A7464C8 000104 (v01 00000000 00000000)
ACPI: Reserving FACP table memory at [mem 0x7a740728-0x7a740833]
ACPI: Reserving DSDT table memory at [mem 0x7a7231f8-0x7a740721]
ACPI: Reserving FACS table memory at [mem 0x7a80ef80-0x7a80efbf]
ACPI: Reserving APIC table memory at [mem 0x7a740838-0x7a7408bb]
ACPI: Reserving FPDT table memory at [mem 0x7a7408c0-0x7a740903]
ACPI: Reserving FIDT table memory at [mem 0x7a740908-0x7a7409a3]
ACPI: Reserving MCFG table memory at [mem 0x7a7409a8-0x7a7409e3]
ACPI: Reserving SSDT table memory at [mem 0x7a7409e8-0x7a744bac]
ACPI: Reserving SSDT table memory at [mem 0x7a744bb0-0x7a745203]
ACPI: Reserving SSDT table memory at [mem 0x7a745208-0x7a74525f]
ACPI: Reserving UEFI table memory at [mem 0x7a745260-0x7a7452a1]
ACPI: Reserving SSDT table memory at [mem 0x7a7452a8-0x7a745510]
ACPI: Reserving HPET table memory at [mem 0x7a745518-0x7a74554f]
ACPI: Reserving SSDT table memory at [mem 0x7a745550-0x7a745cb2]
ACPI: Reserving SSDT table memory at [mem 0x7a745cb8-0x7a745f47]
ACPI: Reserving SSDT table memory at [mem 0x7a745f48-0x7a7460c1]
ACPI: Reserving LPIT table memory at [mem 0x7a7460c8-0x7a7461cb]
ACPI: Reserving BCFG table memory at [mem 0x7a7461d0-0x7a746308]
ACPI: Reserving PRAM table memory at [mem 0x7a746310-0x7a74633f]
ACPI: Reserving BGRT table memory at [mem 0x7a746340-0x7a746377]
ACPI: Reserving CSRT table memory at [mem 0x7a746378-0x7a7464c3]
ACPI: Reserving WDAT table memory at [mem 0x7a7464c8-0x7a7465cb]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007bffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008efff]
node 0: [mem 0x0000000000090000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001effffff]
node 0: [mem 0x0000000020200000-0x000000007a6e9fff]
node 0: [mem 0x000000007abdc000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 98 pages in unavailable ranges
On node 0, zone DMA32: 4608 pages in unavailable ranges
On node 0, zone DMA32: 1266 pages in unavailable ranges
On node 0, zone DMA32: 16384 pages in unavailable ranges
Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[mem 0x7ef00000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s190184 r8192 d31000 u524288
pcpu-alloc: s190184 r8192 d31000 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Kernel command line: initrd=\initrd LABEL=normal net.ifnames=0
Unknown kernel command line parameters "LABEL=normal", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 493838
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 1843952K/2007720K available (20480K kernel code, 2628K rwdata, 5652K rodata, 3572K init, 1808K bss, 163512K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 55939 entries in 219 pages
ftrace: allocated 219 pages with 6 groups
Dynamic Preempt: full
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
hpet: HPET dysfunctional in PC10. Force disabled.
APIC: Switch to symmetric I/O mode setup
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=1440000)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 56K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,landlock,integrity
landlock: Up and running.
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
signal: max sigframe size: 1440
Estimated ratio of average max frequency by base frequency (times 1024): 1365
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (11520.00 BogoMIPS)
devtmpfs: initialized
ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x7a747000-0x7a80efff] (819200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as E820 entry
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
raid6: sse2x4 gen() 3540 MB/s
raid6: sse2x2 gen() 3464 MB/s
raid6: sse2x1 gen() 2638 MB/s
raid6: using algorithm sse2x4 gen() 3540 MB/s
raid6: .... xor() 1007 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
fbcon: Taking over console
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001AD9800 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001B29000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001AAD600 00015F (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888001950F00 00008D (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: _OSC evaluated successfully for all CPUs
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: \_SB_.P12T: New power resource
ACPI: \_SB_.P12A: New power resource
ACPI: \_SB_.PCI0.ISP3.ID3C: New power resource
ACPI: \_SB_.USBC: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.SSCW.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC1.WWPR: New power resource
ACPI: \_SB_.PCI0.XHC1.RHUB.HSC3.WWPR: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK3: New power resource
ACPI: \_SB_.PCI0.I2C2.CLK4: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK2: New power resource
ACPI: \_SB_.PCI0.I2C3.CLK1: New power resource
ACPI: \_SB_.P28X: New power resource
ACPI: \_SB_.P18X: New power resource
ACPI: \_SB_.P12X: New power resource
ACPI: \_SB_.P28P: New power resource
ACPI: \_SB_.P18P: New power resource
ACPI: \_SB_.P19X: New power resource
ACPI: \_SB_.P06X: New power resource
ACPI: \_SB_.P28T: New power resource
ACPI: \_SB_.P18D: New power resource
ACPI: \_SB_.P18T: New power resource
ACPI: \_SB_.P3P3: New power resource
ACPI: \_SB_.P28W: New power resource
ACPI: \_SB_.P18W: New power resource
ACPI: \_SB_.P12W: New power resource
ACPI: \_SB_.P33W: New power resource
ACPI: \_SB_.P33X: New power resource
ACPI: \_SB_.P4BW: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x9152c000-0x9152cfff 64bit]
pci 0000:00:11.0: [8086:2295] type 00 class 0x080501
pci 0000:00:11.0: reg 0x10: [mem 0x91529000-0x91529fff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0x91404000-0x91404fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x91400000-0x91403fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x91400000-0x914fffff]
pci_bus 0000:00: on NUMA node 0
Low-power S0 idle used by default for system suspend
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKA disabled
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKB disabled
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKC disabled
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKD disabled
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: \_SB_.PCI0.I2C4.CLK0: New power resource
ACPI: \_SB_.PCI0.I2C4.CLK1: New power resource
iommu: Default domain type: Translated
--- End code ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version