MLD-5.x > Raspberry PI

kein flüssiges Bild bei MLD 5.5 Testing rpi4 und Magenta-TV (IPTV)

<< < (3/4) > >>

gr4vity:
Hi sturmmoewe,

I noticed that you haven't posted any feedback,
According to this thread by mldnonexpert, Kodi doesn't work either.
https://www.minidvblinux.de/forum/index.php?topic=10274.msg81702#msg81702
You said we'll see but apparently you didn't see anything ... right?  :D

Best Regards.

sturmmoewe:
Hi gr4vity

Sorry for coming back so late due to lack of testing time caused by my job  8)

I tried setting up MLD 5.5 Testing with Kodi and also tried gstreamer instead of softhddevice.
But with no combination I got any working environment. All I got was a blank X screen with no application at all. Kodi did not work neither using softhddevice nor gstreamer and VDR also didn't come up when choosing gstreamer instead of softhddevice at installation. On the rpi4 I only the combination VDR with softhddevice at install works (with the discussed problems).
So I'm still searching for other other test cases to try out with MLD and rpi4 ro get Magenta IPTV working.
Or maybe the rpi4 really lacks resources for my special usecase.

Best Regards,

BobW:
Hi sturmmoewe,

some 5 years ago I set up an IPTV-VDR using A1-Telekom's IPTV services (Austria). Contrary to the channels.conf offered by MLD I found that no ffmpeg was required and no additional scripts werde needed. Just vdr-plugin-iptv and a fitting channels.conf. Here is an example:

--- Code: ---:-> IPTV ARD-ZDF HD
Das Erste HD;IPTV:110:S=0|P=0|F=UDP|U=239.35.10.1|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:10301:1:10301:0
ZDF HD;IPTV:120:S=0|P=0|F=UDP|U=239.35.10.2|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11110:1:11110:0
zdf_neo HD;IPTV:1550:S=0|P=0|F=UDP|U=239.35.10.55|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11130:1:11130:0
arte HD;IPTV:130:S=0|P=0|F=UDP|U=239.35.10.3|A=10000:I:0:256=27:257=deu@3,258=fra@3:259:0:10302:1:10302:0
3sat HD;IPTV:1470:S=0|P=0|F=UDP|U=239.35.10.47|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11150:1:11150:0
KiKA HD;IPTV:1110:S=0|P=0|F=UDP|U=239.35.10.11|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11160:1:11160:0
ZDFinfo HD;IPTV:1560:S=0|P=0|F=UDP|U=239.35.10.56|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11170:1:11170:0
zdf.kultur HD;IPTV:1540:S=0|P=0|F=UDP|U=239.35.10.54|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:11140:1:11140:0
SWR BW HD;IPTV:1510:S=0|P=0|F=UDP|U=239.35.10.51|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:10303:1:10303:0
SWR RP HD;IPTV:1520:S=0|P=0|F=UDP|U=239.35.10.52|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:10304:1:10304:0
BR Süd HD;IPTV:1490:S=0|P=0|F=UDP|U=239.35.10.49|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:10325:1:10325:0
NDR FS NDS HD;IPTV:1500:S=0|P=0|F=UDP|U=239.35.10.50|A=10000:I:0:256=27:257=deu@3:259:0:10327:1:10327:0
WDR HD Köln;IPTV:1530:S=0|P=0|F=UDP|U=239.35.10.53|A=10000:I:0:256=27:257=deu@3:259:0:28111:1:28111:0
PHOENIX HD;IPTV:1480:S=0|P=0|F=UDP|U=239.35.10.48|A=10000:I:0:256=27:257=deu@3;258=AC3@106:259:0:10331:1:10331:0

--- End code ---

The addresses needed I got from the Internet. The parameters for the channel entries were/are listed in the documentations.
In my case the only caveat was the missing EPG, none at all. That could be remedied with an external source.
This machine was running for more than a year without any problems

Maybe this can help you getting on with your project.

Kind regards
BobW

gr4vity:
Hi sturmmoewe,
Thanks for the feedback,
I think you don't need to install a lot of combinations to make it work  :)
You only need Kodi with PVR IPTV simple client enabled.




As you can see in screenshot, you only need m3u playlist to make it work.

You can do the same thing with VLC.
The problem is you need to have hardware acceleration enabled to lower the CPU consumption.

I asked Claus to build Kodi with hardware acceleration but he didn't reply yet.

I have no idea if it's enabled in VLC or not.

Softhddevice will not work by itself, you need to enable an IPTV plugin to make it work.

Best Regards.

sturmmoewe:
Frohe Weihnachten nachträglich an alle.

Es gibt positive Neuigkeiten. Die Ruckler beim IPTV kommen durch die dazwischengeschaltete vlc2iptv Instanz. Wenn die IPTV Kanalliste per .m3u in eine channlens.conf konvertiert wird, sieht beispielsweise der Eintrag für "Das Erste HD" wie folgt aus:

--- Code: ---(1) Das Erste HD;IPTV|T-Entertain_M3U:1:S=0|P=0|F=EXT|U=vlc2iptv|A=1:I:0:256=27:257=deu@4;258=AC3@106:2321:0:28106:0:0:0
--- End code ---

Die .m3u Datei enthält die diesen Sender den Eintrag:

--- Code: ---#EXTINF:-1,(1) Das Erste HD
rtp://87.141.215.251@232.0.20.35:10000
--- End code ---

In einem älteren Backup habe ich eine Version einer (auf einem andere VDR System) in der Vergangenheit funktionierenden IPTV channels.conf gefunden. Dort sieht die Zeile für "Das Erste HD" dagegen wie folgt aus:

--- Code: ---Das Erste HD;IPTV:23500:S=1|P=0|F=UDP|U=87.141.215.251@232.0.20.35|A=10000:I:0:256=27:258=deu@3;257=deu@106:259:1A:10301:1:10301:0
--- End code ---

Hier wird kein vlc2iptv dazwischengeschaltet. Dieser Stream läuft auch auf dem RPi4 flüssig. Allerdings ist diese ältere channels.conf so alt, dass nicht mehr alle Streams gültig sind. Ich suche jetzt einen Weg, aus der (von der Fritzbox) ladbaren .m3u Senderliste eine funktionierende channels.conf ohne das vlc2iptv erzeugen zu können.
Falls hier jemand von euch Tipps hat freue ich mich.

Euch allen einen guten Rutsch.

Navigation

[0] Message Index

[#] Next page

[*] Previous page