[1] MLD-5.x / Systems / x86 Systeme (PC) / MLD 5.4: DVB-T2 HD und Dolby Digital Plus (E-AC-3)
 

Offline Antonius

  • Member
  • **
  • Posts: 87
    • View Profile
MLD 5.4: DVB-T2 HD und Dolby Digital Plus (E-AC-3)
« on: January 20, 2019, 17:41:52 »
Hi,

bei mir funktioniert die Ton-Ausgabe mit den DVB-T2 HD Sendern nicht, die mit Dolby Digital Plus (E-AC-3) ausgestrahlt werden. Im softhddevice habe ich in den Audioeinstellungen das Folgende konfiguriert:

Code: [Select]
Pass-Through-Standard: ein
PCM pass-through: ja
AC-3 pass-through: ja
E-AC-3pass-through: ja
PCM pass-through: ja
AKtiviere (E-)AC-3 (devoder) downmix: nein

Ich verwende einen 7.2 Verstärker (Onkyo TX-NR717), der Dolby Digital Plus fähig ist.

Bis hoch zu Dolby Digital (AC-3) funktioneren die Audioformate. Allerdngs nicht mit E-AC-3:

MLD 5.4 stable: Der Verstärker springt in schneller Folge zwischen AC-3 und E-AC-3 hin- und her ohne einen Ton auszugeben.
MLD 5.4 unstable: Es kommt ein Zwitschern aus den Lautsprechern.

Ich verwende einen Intel NUC6CAYH.

Gibt es eine Lösung?

Viele Grüße
Sascha
MLD 5.4 stable - Fujitsu P556 (Intel G4400) / 4GB RAM / 4TB HDD / DVBSky S952 V3 Dual DVB-S2 / lirc IgorUSB
MLD 5.4 stable - Intel NUC5CPYH / 4GB RAM / 1TB HDD / 2x DVBSky S960 DVB-S2 USB / rc_core
MLD 5.3 stable - Raspberry PI2

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20122
    • View Profile
    • ClausMuus.de
MLD 5.4: DVB-T2 HD und Dolby Digital Plus (E-AC-3)
« Reply #1 on: January 20, 2019, 23:39:17 »
Schaue mal in's System Setup unter Audio. Dort stelle als ausgabe Device das ein das Du verwendest. Und unter Setup muss das Stereo raus und der "-" (also nichts) ausgewählt sein.
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline Antonius

  • Member
  • **
  • Posts: 87
    • View Profile
MLD 5.4: DVB-T2 HD und Dolby Digital Plus (E-AC-3)
« Reply #2 on: January 21, 2019, 07:48:48 »
Hallo Claus,

für die MLD 5.4 stable war das bereits der Fall. Bei der MLD 5.4 unstable hatte ich "-" beim Lautsprecher Setup vergessen. Damit funktioniert E-AC-3 bei der unstable.

Zsammenfassung:
MLD 5.4 stable: E-AC-3 funktioniert nicht
MLD 5.4 unstable: E-AC-3 funktioniert

Viele Grüße
Sascha
MLD 5.4 stable - Fujitsu P556 (Intel G4400) / 4GB RAM / 4TB HDD / DVBSky S952 V3 Dual DVB-S2 / lirc IgorUSB
MLD 5.4 stable - Intel NUC5CPYH / 4GB RAM / 1TB HDD / 2x DVBSky S960 DVB-S2 USB / rc_core
MLD 5.3 stable - Raspberry PI2

[1] MLD-5.x / Systems / x86 Systeme (PC) / MLD 5.4: DVB-T2 HD und Dolby Digital Plus (E-AC-3)
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.